Return partial match from dns_db_find/dns_db_find when requested
to short circuit the closest encloser discover process. Most of the
time this will be the actual closest encloser but may not be when
there yet to be committed / cleaned up versions of the zone with
names below the actual closest encloser.
(cherry picked from commit d42ea08f16)
Add a regression test case for the scenario where a secure chain of
trust includes an inactive KSK, that is a KSK that is not signing the
DNSKEY RRset.
(cherry picked from commit f0bfd276e0)
We were missing a test where a single owner name would have multiple
types with a different case. The generated RRSIGs and NSEC records will
then have different case than the signed records and message parser have
to cope with that and treat everything as the same owner.
When transitioning from one NSEC3 chain to another it is legal for
there to be multiple complete chains in the zone with multiple
NSEC3PARAM records. Handle this intermediate state by checking
for the expected length in the loop.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
(manually replayed commit 4cb8b13987)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
(cherry picked from commit 168dba163c)
The covered type previously displayed as TYPE0 when it should
have reflected the records that was actually covered.
(cherry picked from commit 8ce359652a)
Ensure handling of return code from previous command doesn't cause the
script to halt if that code is non-zero when running with `set -e`.
(cherry picked from commit 837c190d9e)
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
(cherry picked from commit 01bc805f89)
Surround the variables which are checked whether they're executable in
double quotes. Without them, empty paths won't be properly interpreted
as not executable.
(manually picked from commit 06056c44a7)
The ability to read legacy HMAC-MD5 K* keyfile pairs using algorithm
number 157 was accidentally lost when the algorithm numbers were
consolidated into a single block, in commit
09f7e0607a.
The assumption was that these algorithm numbers were only known
internally, but they were also used in key files. But since HMAC-MD5
got renumbered from 157 to 160, legacy HMAC-MD5 key files no longer
work.
Move HMAC-MD5 back to 157 and GSSAPI back to 160. Add exception for
GSSAPI to list_hmac_algorithms.
(cherry picked from commit 3f93d3f757)
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
(cherry picked from commit c100308b7d)
Add a dnssec test to make sure that named can correctly process a
managed-keys zone with a placeholder KEYDATA record.
(cherry picked from commit 8c48eabbc1)
The HMACs and GSSAPI are just using unallocated values.
Moving them around shouldn't cause issues.
Only the dnssec system test knew the internal number in use for hmacmd5.
(cherry picked from commit 09f7e0607a)
The old code could incorrectly match "INSOA" in the RRSIG rdata
when looking for the SOA record.
(cherry picked from commit 2fc5f6fb2831697c79f75c50a769449ac561aad0)
The perl modifation code for keyless.example was not deterministic
(/NXT/ matched part of signature) resulting in different error
strings being returned. Replaced /NXT/ with /A RRSIG NSEC/ and
updated expected error string,
(cherry picked from commit 69d5e22e58)
Prime the cache with a negative cache DS entry then make a query for
name beneath that entry. This will cause the DS entry to be retieved
as part of the validation process. Each RRset in the ncache entry
will be validated and the trust level for each will be updated.
(cherry picked from commit d2d9910da2)
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
(cherry picked from commit 1d706f328c)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
Add a test case to the dnssec system test to check that:
- a zone with a prepublished key is only signed with the active key.
- a zone with an inactive key but valid signatures retains those
signatures and does not add signatures from successor key.
- signatures are swapped in a zone when signatures of predecessor
inactive key are within the refresh interval.
Add tests to the nsupdate system test to make sure that CDS and/or
CDNSKEY that match an algorithm in the DNSKEY RRset are allowed. Also
add tests that updates are rejected if the algorithm does not match.
Remove the now redundant test cases from the dnssec system test.
Update the checkzone system test: Change the algorithm of the CDS and
CDNSKEY records so that the zone is still rejected.
Add a check to the "dnssec" system test which ensures that RRSIG(SOA)
RRsets present anywhere else than at the zone apex are automatically
removed after a zone containing such RRsets is loaded.
The draft says that the NSEC(3) TTL must have the same TTL value
as the minimum of the SOA MINIMUM field and the SOA TTL. This was
always the intended behaviour.
Update the zone structure to also track the SOA TTL. Whenever we
use the MINIMUM value to determine the NSEC(3) TTL, use the minimum
of MINIMUM and SOA TTL instead.
There is no specific test for this, however two tests need adjusting
because otherwise they failed: They were testing for NSEC3 records
including the TTL. Update these checks to use 600 (the SOA TTL),
rather than 3600 (the SOA MINIMUM).
ans10 simulates a local anycast server which has both signed and
unsigned instances of a zone. 'A' queries get answered from the
signed instance. Everything else gets answered from the unsigned
instance. The resulting answer should be insecure.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
Add a note why we don't have a test case for the issue.
It is tricky to write a good test case for this if our tools are
not allowed to create signatures for unsupported algorithms.
as the update triggers by the rndc command to clear the signing records
may not have completed by the time the subsequent rndc command to test
that the records have been removed is commenced. Loop several times to
prevent false negative.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
There is a failure mode which gets triggered on heavily loaded
systems. A key change is scheduled in 5 seconds to make ZSK2 inactive
and ZSK3 active, but `named` takes more than 5 seconds to progress
from `rndc loadkeys` to the query check. At this time the SOA RRset
is already signed by the new ZSK which is not expected to be active
at that point yet.
Split up the checks to test the case where RRsets are signed
correctly with the offline KSK (maintained the signature) and
the active ZSK. First run, RRsets should be signed with the still
active ZSK2, second run RRsets should be signed with the new active
ZSK3.
- no longer exclude these entries when dumping the NTA table
- indicate "validate-except" entries with the keyword "permanent" in
place of an expiry date
- add a test for this feature, and update other tests to account for
the presence of extra lines in some rndc outputs
- incidentally removed the unused function dns_ntatable_dump()
- CHANGES, release note
