The dns_rpz_zones structure was using .refs and .irefs for strong and
weak reference counting. Rewrite the unit to use just a single
reference counting + shutdown sequence (dns_rpz_destroy_rpzs) that must
be called by the creator of the dns_rpz_zones_t object. Remove the
reference counting from the dns_rpz_zone structure as it is not needed
because the zone objects are fully embedded into the dns_rpz_zones
structure and dns_rpz_zones_t object must never be destroyed before all
dns_rpz_zone_t objects.
The dns_rps_zones_t reference counting uses the new ISC_REFCOUNT_TRACE
capability - enable by defining DNS_RPZ_TRACE in the dns/rpz.h header.
Additionally, add magic numbers to the dns_rpz_zone and dns_rpz_zones
structures.
(cherry picked from commit 77659e7392)
This adds an island of trust that is reachable from the root
where the trust anchors are added to island.conf.
This add an island of trust that is not reachable from the root
where the trust anchors are added to private.conf.
(cherry picked from commit 41bdb5b9fe)
Occasionally, the allotted 10 seconds for the "running" line to appear
in log after named is started proved insufficient in CI, especially
during increased load. Give named up to 60 seconds to start up to
mitigate this issue.
(cherry picked from commit b8bb4233e8)
isc_bind9 was a global bool used to indicate whether the library
was being used internally by BIND or by an external caller. external
use is no longer supported, but the variable was retained for use
by dyndb, which needed it only when being built without libtool.
building without libtool is *also* no longer supported, so the variable
can go away.
(cherry picked from commit 935879ed11)
Send the test message from ns3 to ns2 instead of ns2 to ns3 as ns2
is started first and therefore the test doesn't have to wait on the
resend of the the NOTIFY message to be successful.
(cherry picked from commit e7e1f59a3a)
Move and give unique names to the dns_db_t, dns_dbnode_t and
dns_dbversion_t pointers, so they have global scope and therefore
are visible to cleanup. Unique names are not strictly necessary,
as none of the functions involved call each other.
Change free_db to handle NULL pointers and also an optional
(dns_dbversion_t **).
In match_keyset_dsset and free_keytable, ki to be handled
differently to prevent a false positive NULL pointer dereference
warning from scan.
In formatset moved dns_master_styledestroy earlier and freed
buf before calling check_result to prevent memory leak.
In append_new_ds_set freed ds on the default path before
calling check_result to prevent memory leak.
(cherry picked from commit 13f9d29954)
dnssec-cds failed to cleanup on non error paths which meant that
the OpenSSL libraries could not cleanup properly.
(cherry picked from commit 81bde388e4)
the nsupdate system test was intermittently failing due to the update
quota not being exceeded when it should have been. this is most likely
a timing issue: the client is sending updates too slowly, or the server
is processing them too quickly, for the quota to fill. this commit
attempts to make that the failure less likely by increasing the number
of update transactions from 10 to 20.
(cherry picked from commit 06b1faf068)
Following deleting the root trust anchor and reconfiguring the
server it takes some time to for trust anchor to appear in 'rndc
managed-keys status' output. Retry several times.
(cherry picked from commit 71dbd09796)
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
(cherry picked from commit 9cffd5c431)
It is trivial to fully cleanup memory on all the error paths in
named-rrchecker, many of which are triggered by bad user input.
This involves freeing lex and mctx if they exist when fatal is
called.
(cherry picked from commit dbe82813e6)
it was possible for a managed trust anchor needing to send a key
refresh query to be unable to do so because an authoritative zone
was not yet loaded. this has been corrected by delaying the
synchronization of managed-keys zones until after all zones are
loaded.
(cherry-picked from commit bafbbd2465)
Add 'port' token to deprecated.conf. Also add options
'use-v4-udp-ports', 'use-v6-udp-ports', 'avoid-v4-udp-ports',
and 'avoid-v6-udp-ports'.
All of these should trigger warnings (except when deprecation warnings
are being ignored).
(cherry picked from commit 531914e660)
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
(cherry picked from commit 470ccbc8ed)
If the address lookup of the primary server fails just abort
the current update request rather than calling exit. This allows
nsupdate to cleanup gracefully.
(cherry picked from commit f1387514c6)
Set the DS state after issuing 'rndc dnssec -checkds'. If the DS
was published, it should go in RUMOURED state, regardless whether it
is already safe to do so according to the state machine.
Leaving it in HIDDEN (or if it was magically already in OMNIPRESENT or
UNRETENTIVE) would allow for easy shoot in the foot situations.
Similar, if the DS was withdrawn, the state should be set to
UNRETENTIVE. Leaving it in OMNIPRESENT (or RUMOURED/HIDDEN)
would also allow for easy shoot in the foot situations.
(cherry picked from commit ee42f66fbe)
Add a test case for a server that uses a resolver as an parental-agent.
We need two root servers, ns1 and ns10, one that delegates to the
'checkds' tld with the DS published (ns2), and one that delegates to
the 'checkds' tld with the DS removed (ns5). Both root zones are
being setup in the 'ns1/setup.sh' script.
We also need two resolvers, ns3 and ns8, that use different root hints
(one uses ns1 address as a hint, the other uses ns10).
Then add the checks to test_checkds.py is similar to the existing tests.
Update 'types' because for zones that have the DS withdrawn (or to be
withdrawn), the CDS and CDNSKEY records should not be published and
thus should not be in the NSEC bitmap.
(cherry picked from commit 0b9a9f9955)
Return 'isc_result_t' type value instead of 'bool' to indicate
the actual failure. Rename the function to something not suggesting
a boolean type result. Make changes in the places where the API
function is being used to check for the result code instead of
a boolean value.
(cherry picked from commit 41dc48bfd7)
The reference counting and isc_timer_attach()/isc_timer_detach()
semantic are actually misleading because it cannot be used under normal
conditions. The usual conditions under which is timer used uses the
object where timer is used as argument to the "timer" itself. This
means that when the caller is using `isc_timer_detach()` it needs the
timer to stop and the isc_timer_detach() does that only if this would be
the last reference. Unfortunately, this also means that if the timer is
attached elsewhere and the timer is fired it will most likely be
use-after-free, because the object used in the timer no longer exists.
Remove the reference counting from the isc_timer unit, remove
isc_timer_attach() function and rename isc_timer_detach() to
isc_timer_destroy() to better reflect how the API needs to be used.
The only caveat is that the already executed event must be destroyed
before the isc_timer_destroy() is called because the timer is no longet
attached to .ev_destroy_arg.
(cherry picked from commit ae01ec2823)
When we change the view in the view->managed_keys, we never commit the
change, keeping the previous view possibly attached forever.
Call the dns_zone_setviewcommit() immediately after changing the view as
we are detaching the previous view anyway and there's no way to recover
from that.
(cherry picked from commit 7e8b53720d)
The condition was accidentally reversed during refactoring in
9730ac4c56 . It would result in skipped
tests on builds with proper support and false negatives on builds
without proper feature support.
Credit for reporting the issue and the fix goes to Stanislav Levin.
(cherry picked from commit 473cb530f4)
Instead of using the current working directory to find the ifconfig.sh
script, look for the ifconfig.sh.in template in the directory where the
testsock.pl script is located. This enables the testsock.pl script to be
called from any working directory.
Using the ifconfig.sh.in template is sufficient, since it contains
the necessary information to be extracted: the max= value (which is
hard-coded in the template).
(cherry picked from commit e24d3b21d0)
Move the core dump detection functionality for system test runs into a
separate script. This enables reuse by the pytest runner. The
functionality remains the same.
(cherry picked from commit d9a97200d5)
Avoid creating any temporary files in the current workdir.
Additional/changing files in the bin/tests/system directory are
problematic for pytest/xdist collection phase, which assumes the list of
files doesn't change between the collection phase of the main pytest
thread and the subsequent collection phase of the xdist worker threads.
Since the testcrypto.sh is also called during pytest initialization
through conf.sh.common (to detect feature support), this could
occasionally cause a race condition when the list of files would be
different for the main pytest thread and the xdist worker.
(cherry picked from commit 61330a7863)
verify that updates are refused when the client is disallowed by
allow-query, and update forwarding is refused when the client is
is disallowed by update-forwarding.
verify that "too many DNS UPDATEs" appears in the log file when too
many simultaneous updates are processing.
(cherry picked from commit b91339b80e)
limit the number of simultaneous DNS UPDATE events that can be
processed by adding a quota for update and update forwarding.
this quota currently, arbitrarily, defaults to 100.
also add a statistics counter to record when the update quota
has been exceeded.
(cherry picked from commit 7c47254a14)
Previously, an incremental hash table resizing was implemented for the
dns_rbt_t hash table implementation. Using that as a base, also
implement the incremental hash table resizing also for isc_ht API
hashtables:
1. During the resize, allocate the new hash table, but keep the old
table unchanged.
2. In each lookup, delete, or iterator operation, check both tables.
3. Perform insertion operations only in the new table.
4. At each insertion also move <r> elements from the old table to
the new table.
5. When all elements are removed from the old table, deallocate it.
To ensure that the old table is completely copied over before the new
table itself needs to be enlarged, it is necessary to increase the
size of the table by a factor of at least (<r> + 1)/<r> during resizing.
In our implementation <r> is equal to 1.
The downside of this approach is that the old table and the new table
could stay in memory for longer when there are no new insertions into
the hash table for prolonged periods of time as the incremental
rehashing happens only during the insertions.
(cherry picked from commit e42cb1f198)
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
(cherry picked from commit 916ea26ead)
Prime the cache with the following records:
shortttl.cname.example. 1 IN CNAME longttl.target.example.
longttl.target.example. 600 IN A 10.53.0.2
Wait for the CNAME record to expire, disable the authoritative server,
and query 'shortttl.cname.example' again, expecting a stale answer.
(cherry picked from commit 537187bf2f)
This bug was masked in the tests because the `catz` test script did an
`rndc addzone` before an `rndc delzone`. The `addzone` autovivified
the NZF config, so `delzone` worked OK.
This commit swaps the order of two sections of the `catz` test script
so that it uses `delzone` before `addzone`, which provokes a crash
when `delzone` requires a non-NULL NZF config.
To fix the crash, we now try to remove the zone from the NZF config
only if it was dynamically added but not by a catalog zone.
(cherry picked from commit 9fa20d6f6c)
The pre-defined test cases use named.$TESTCASE.conf naming convention,
where TESTCASE is a human readable name contaning actual word(s). The
autogenerated test cases' names always start with a number from 1 to 6.
(cherry picked from commit e03daf22ec)
The ans*.pl scripts are part of system tests and should be part of the
repository. The gitignore entires for these files have been removed.
(cherry picked from commit b8616e457f)
bin/tests/system/rrsetorder/dig.out* files match a gitignore expression
present in bin/tests/system/.gitignore. Since these are meant to be
reference files that are compared to the files generated when the
"rrsetorder" system test is run, rename them to avoid listing tracked
files in .gitignore files.
(cherry picked from commit c5708044e7)
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
(cherry picked from commit 7962e7f575)
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
(cherry picked from commit f102df96b8)
The test expects a "connection timed out" message from DiG when it
experiences a timeout, while the current version of DiG prints just
a "timed out" message, like below:
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
; <<>> DiG 9.19.9-dev <<>> -p 11314 +tries +time +tcp +tries +time @10.53.0.1 dropedns. TXT
; (1 server found)
;; global options: +cmd
;; no servers could be reached
Change the expected string to match the current DiG output.
Use the '-F' switch for "grep" for matching a fixed string.
(cherry picked from commit 35988748f3)
In order to have a common naming convention for system tests, rename the
only outlier "engine_pkcs11" to "enginepkcs11", which was the only
system test using an underscore in its name.
The only allowed word separators for system test names are either dash
or no separator.
(cherry picked from commit 62eea511db)
It is better to use consistent file names to avoid issue with sorting
etc.
Using underscore in filenames as opposed to dash was chosen because it
seems more common in pytest/python to use underscore for filenames.
Also rename the bin/tests/system/timeouts/tests-tcp.py file to
bin/tests/system/timeouts/tests_tcp_timeouts.py to avoid pytest name
collision (there can't be two files named tests_tcp.py).
(cherry picked from commit f6409ee6ac)
This introduces a Python dependency for running system tests. It is
needed in order to:
- write new test control scripts in Python
- gradually rewrite old Perl scripts into Python if needed
- eventually introduce pytest as the new test runner framework
This commit is not intended to be backported to 9.16.
(cherry picked from commit 56416ebd65)
This change has no practical impact, as Perl was already required for
all system tests, this check only makes it more explicit.
(cherry picked from commit 084d72d1d5)
Nothing from conf.sh.common is required to set these values. On the
contrary, a Python interpreter needs to be set in order to randomize the
algorithm set (which happens in conf.sh.common).
(cherry picked from commit 492992dca8)
When testcrypto.sh is used as a standalone script, always use quiet mode
to avoid using undefined commands (such as echo_i) which require
inclusion of the entire conf.sh machinery.
(cherry picked from commit ba35a6df9c)
