dns_view_zonecut() may associate the dns_rdataset_t structure passed to
it even if it returns a result different then ISC_R_SUCCESS. Not
handling this properly may cause a reference leak. Fix by ensuring
'nameservers' is cleaned up in all relevant failure modes.
Prevent ans2.pl from responding authoritatively for any name at or below
example.net.
Make ans3.pl properly answer example.net/NS queries. Use string
comparisons instead of regular expressions where possible.
lo0 and lo0:0 are the same interface on Solaris. Make sure
bin/tests/system/ifconfig.sh does not touch lo0:0 in order to prevent it
from changing the address of the loopback interface on Solaris.
The "git status" command in Git versions before 1.7.2 does not support
the "--ignored" option. Prevent spamming the console when running
system tests from a Git repository on a host with an ancient Git version
installed.
The output of certain "dig +idnout" invocations may be locale-dependent.
Remove the "dig +idnout" subtest from the "digdelv" system test as IDN
support is already thoroughly tested by the "idna" system test.
Every prereq.sh script must include bin/tests/system/conf.sh, otherwise
if some prerequisite is not met, errors about echo_i not being found
will be printed instead of actual error messages.
Trying to resolve a trust anchor telemetry query for a locally served
zone does not cause upstream queries to be sent as the response is
determined just by consulting local data. Work around this issue by
calling dns_view_findzonecut() first in order to determine the NS RRset
for a given domain name and then passing the zone cut found to
dns_resolver_createfetch().
Note that this change only applies to TAT queries generated by the
resolver itself, not to ones received from downstream resolvers.
Extract the part of dotat() reponsible for preparing the QNAME for a TAT
query to a separate function in order to limit the number of local
variables used by each function and improve code readability.
Rename 'name' to 'origin' to better convey the purpose of that variable.
Also mark it with the const qualifier.
Update named_zone_reusable() so that it does not consider a zone to be
eligible for reuse if its old value of the "mirror" option differs from
the new one. This causes "rndc reconfig" to create a new zone structure
whenever the value of the "mirror" option is changed, which ensures that
the previous zone database is not reused and that flags are properly set
in responses sourced from zones whose "mirror" setting was changed at
runtime.
Net::DNS versions older than 0.67 respond to queries sent to a
Net::DNS::Nameserver even if its ReplyHandler returns undef. This makes
the "serve-stale" system test fail as it takes advantage of the newer
behavior. Since the latest Net::DNS version available with stock
RHEL/CentOS 6 packages is 0.65 and we officially support that operating
system, bin/tests/system/serve-stale/ans2/ans.pl should behave
consistently for various Net::DNS versions. Ensure that by reworking it
so that it does not use Net::DNS::Nameserver.
Net::DNS versions older than 0.68 insert a ./ANY RR into the QUESTION
section if the latter is empty. Since the latest Net::DNS version
available with stock RHEL/CentOS 6 packages is 0.65 and we officially
support that operating system, bin/tests/system/resolver/ans8/ans.pl
should behave consistently for various Net::DNS versions. Ensure that
by making handleUDP() return the query ID and flags generated by
Net::DNS with 8 zero bytes appended.
While idn2_to_unicode_8zlz() takes a 'flags' argument, it is ignored and
thus cannot be used to perform IDN checks on the output string.
The bug in libidn2 versions before 2.0.5 was not that a call to
idn2_to_unicode_8zlz() with certain flags set did not cause IDN checks
to be performed. The bug was that idn2_to_unicode_8zlz() did not check
whether a conversion can be performed between UTF-8 and the current
locale's character encoding. In other words, with libidn2 version
2.0.5+, if the current locale's character encoding is ASCII, then
idn2_to_unicode_8zlz() will fail when it is passed any Punycode string
which decodes to a non-ASCII string, even if it is a valid IDNA2008
name.
Rework idn_ace_to_locale() so that invalid IDNA2008 names are properly
and consistently detected for all libidn2 versions and locales.
Update the "idna" system test accordingly. Add checks for processing a
server response containing Punycode which decodes to an invalid IDNA2008
name. Fix invalid subtest description.
Since idn_output_filter() no longer uses its 'absolute' argument and no
other callback is used with dns_name_settotextfilter(), remove the
'absolute' argument from the dns_name_totextfilter_t prototype.
output_filter() does not need to dot-terminate its input name because
libidn2 properly handles both dot-terminated and non-dot-terminated
names. libidn2 also does not implicitly dot-terminate names passed to
it, so parts of output_filter() handling dot termination can simply be
removed.
Fix a logical condition to make sure 'src' can fit the terminating NULL
byte. Replace the MAXDLEN macro with the MXNAME macro used in the rest
of dig source code. Tweak comments and variable names.
Rename output_filter() to idn_output_filter() so that it can be easily
associated with IDN and other idn_*() functions.
idn_ace_to_locale() may return a string longer than MAXDLEN because it
is using the current locale's character encoding. Rather then imposing
an arbitrary limit on the length of the string that function can return,
make it pass the string prepared by libidn2 back to the caller verbatim,
making the latter responsible for freeing that string. In conjunction
with the fact that libidn2 errors are considered fatal, this makes
returning an isc_result_t from idn_ace_to_locale() unnecessary.
Do not process success cases in conditional branches for improved
consistency with the rest of BIND source code. Add a comment explaining
the purpose of idn_ace_to_locale(). Rename that function's parameters
to match common BIND naming pattern.
idn_locale_to_ace() is a static function which is always used with a
buffer of size MXNAME, i.e. one that can fit any valid domain name.
Since libidn2 detects invalid domain names and libidn2 errors are
considered fatal, remove size checks from idn_locale_to_ace(). This
makes returning an isc_result_t from it unnecessary.
Do not process success cases in conditional branches for improved
consistency with the rest of BIND source code. Add a comment explaining
the purpose of idn_locale_to_ace(). Rename that function's parameters
to match common BIND naming pattern.
Certain characters, like symbols, are allowed by IDNA2003, but not by
IDNA2008. Make dig reject such symbols when IDN input processing is
enabled to ensure BIND only supports IDNA2008. Update the "idna" system
test so that it uses one of such symbols rather than one which is
disallowed by both IDNA2003 and IDNA2008.
There is no need to call dns_name_settotextfilter() in setup_system()
because setup_lookup() determines whether IDN output processing should
be enabled for a specific lookup (taking the global setting into
consideration) and calls dns_name_settotextfilter() anyway if it is.
Remove the dns_name_settotextfilter() call from setup_system().
Clean up the parts of configure.in responsible for handling libidn2
detection and adjust other pieces of the build system to match these
cleanups:
- use pkg-config when --with-libidn2 is used without an explicit path,
- look for idn2_to_ascii_lz() rather than idn2_to_ascii_8z() as the
former is used in BIND while the latter is not,
- do not look for idn2_to_unicode_8zlz() as it is present in all
libidn2 versions which have idn2_to_ascii_lz(),
- check whether the <idn2.h> header is usable,
- set LDFLAGS in the Makefile for dig so that, if specified, the
requested libidn2 path is used when linking with libidn2,
- override CPPFLAGS when looking for libidn2 components so that the
configure script does not produce warnings when libidn2 is not
installed system-wide,
- merge the AS_CASE() call into the AS_IF() call below it to simplify
code,
- indicate the default value of --with-libidn2 in "./configure --help"
output,
- use $with_libidn2 rather than $use_libidn2 to better match the name
of the configure script argument,
- stop differentiating between IDN "in" and "out" support, i.e. make
dig either support libidn2 or not; remove WITH_* Autoconf macros and
use a new one, HAVE_LIBIDN2, to determine whether libidn2 support
should be enabled.
Replace "type: slave" with "type: mirror" in "rndc zonestatus" output
for mirror zones in order to enable the user to tell a regular slave
zone and a mirror zone apart.
Since the mirror zone feature is expected to mostly be used for the root
zone, prevent slaves from sending NOTIFY messages for mirror zones by
default. Retain the possibility to use "also-notify" as it might be
useful in certain cases.
As mirror zone data should be treated the way validated, cached DNS
responses are, outgoing mirror zone transfers should be disabled unless
they are explicitly enabled by zone configuration.
As mirror zone data should be treated the way validated, cached DNS
responses are, it should not be used when responding to clients who are
not allowed cache access. Reuse code responsible for determining cache
database access for evaluating mirror zone access.
If transferring or loading a mirror zone fails, resolution should still
succeed by means of falling back to regular recursive queries.
Currently, though, if a slave zone is present in the zone table and not
loaded, a SERVFAIL response is generated. Thus, mirror zones need
special handling in this regard.
Add a new dns_zt_find() flag, DNS_ZTFIND_MIRROR, and set it every time a
domain name is looked up rather than a zone itself. Handle that flag in
dns_zt_find() in such a way that a mirror zone which is expired or not
yet loaded is ignored when looking up domain names, but still possible
to find when the caller wants to know whether the zone is configured.
This causes a fallback to recursion when mirror zone data is unavailable
without making unloaded mirror zones invisible to code checking a zone's
existence.
Zone RRsets are assigned trust level "ultimate" upon load, which causes
the AD bit to not be set in responses coming from slave zones, including
mirror zones. Make dns_zoneverify_dnssec() update the trust level of
verified RRsets to "secure" so that the AD bit is set in such responses.
No rollback mechanism is implemented as dns_zoneverify_dnssec() fails in
case of any DNSSEC failure, which causes the mirror zone version being
verified to be discarded.
Section 4 of RFC 7706 suggests that responses sourced from a local copy
of a zone should not have the AA bit set. Follow that recommendation by
setting 'qctx->authoritative' to ISC_FALSE when a response to a query is
coming from a mirror zone.
When a resolver is a regular slave (i.e. not a mirror) for some zone,
non-recursive queries for names below that slaved zone will return a
delegation sourced from it. This behavior is suboptimal for mirror
zones as their contents should rather be treated as validated, cached
DNS responses. Modify query_delegation() and query_zone_delegation() to
permit clients allowed cache access to check its contents for a better
answer when responding to non-recursive queries.
Make ns3 mirror the "root" zone from ns1 and query the former for a
properly signed record below the root. Ensure ns1 is not queried during
resolution and that the AD bit is set in the response.
As mirror zone files are verified when they are loaded from disk, verify
journal files as well to ensure invalid data is not used. Reuse the
journals generated during IXFR tests to test this.
