This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
Previously, the taskmgr, timermgr and socketmgr had a constructor
variant, that would create the mgr on top of existing appctx. This was
no longer true and isc_<*>mgr was just calling isc_<*>mgr_create()
directly without any extra code.
This commit just cleans up the extra function.
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
The libirs contained own re-implementations of the getaddrinfo,
getnameinfo and gai_strerror + irs_context and irs_dnsconf API that was
unused anywhere in the BIND 9.
Keep just the irs_resonf API that is being extensively used to parse
/etc/resolv.conf by several of BIND 9 tools.
The 'ephemeral' database implementation was used to provide a
lightweight database implemenation that doesn't cache results, and the
only place where it was really use is "samples" because delv is
overriding this to use "rbtdb" instead. Otherwise it was completely
unused.
* The 'ephemeral' cache DB (ecdb) implementation. An ecdb just provides
* temporary storage for ongoing name resolution with the common DB interfaces.
* It actually doesn't cache anything. The implementation expects any stored
* data is released within a short period, and does not care about the
* scalability in terms of the number of nodes.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
This commit makes some minor changes to the trust anchor code:
1. Replace the undescriptive n1, n2 and n3 identifiers with slightly
better rdata1, rdata2, and rdata3.
2. Fix an occurrence where in the error log message a static number
32 was printed, rather than the rdata3 length.
3. Add a default case to the switch statement checking DS digest
algorithms to catch unknown algorithms.
The indentation for dumping the master zone was driven by two
global variables dns_master_indent and dns_master_indentstr. In
threaded mode, this becomes prone to data access races, so this commit
converts the global variables into a local per-context tuple that
consist of count and string.
The coccinellery repository provides many little semantic patches to fix common
problems in the code. The number of semantic patches in the coccinellery
repository is high and most of the semantic patches apply only for Linux, so it
doesn't make sense to run them on regular basis as the processing takes a lot of
time.
The list of issue found in BIND 9, by no means complete, includes:
- double assignment to a variable
- `continue` at the end of the loop
- double checks for `NULL`
- useless checks for `NULL` (cannot be `NULL`, because of earlier return)
- using `0` instead of `NULL`
- useless extra condition (`if (foo) return; if (!foo) { ...; }`)
- removing & in front of static functions passed as arguments
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
The ax_check_openssl m4 macro used OPENSSL_INCLUDES. Rename the
subst variable to OPENSSL_CFLAGS and wrap AX_CHECK_OPENSSL() in
action-if-not-found part of PKG_CHECK_MODULE check for libcrypto.
The json-c have previously leaked into the global namespace leading
to forced -I<include_path> for every compilation unit using isc/xml.h
header. This MR fixes the usage making the caller object opaque.
The libxml2 have previously leaked into the global namespace leading
to forced -I<include_path> for every compilation unit using isc/xml.h
header. This MR fixes the usage making the caller object opaque.
