The root cause is the fix for CVE-2024-0760 (part 3), which resets
the TCP connection on a failed send. Specifically commit
4b7c61381f stops reading on the socket
because the TCP connection is throttling.
When the tcpdns_send_cb callback thinks about restarting reading
on the socket, this fails because the socket is a client socket.
And nsupdate is a client and is using the same netmgr code.
This commit removes the requirement that the socket must be a server
socket, allowing reading on the socket again after being throttled.
The code that listens on individual interfaces is now stable and doesn't
require any changes. The code that would bind to IPv6 wildcard address
and then use IPv6 pktinfo structure to get the source address is not
going to be completed, so it's better to just remove the dead cruft.
In 2024, it is reasonable to assume that IPv4 and IPv6 is always
available on a socket() level. We still keep the option to enable or
disable each IP version individually, as the routing might be broken or
undesirable for one of the versions.
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
The libisc now includes sizeable chunks of cryptography, but the crypto
log module was missing. Add the new ISC_LOGMODULE_CRYPTO to libisc and
use it in the isc_tls error logging.
Add query counters for DoT, DoH, unencrypted DoH and their proxied
counterparts. The protocols don't increment TCP/UDP counters anymore
since they aren't the same as plain DNS-over-53.
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
This commit adds support for the EDNS Report-Channel option,
which is returned in authoritative responses when EDNS is in use.
"send-report-channel" sets the Agent-Domain value that will be
included in EDNS Report-Channel options. This is configurable at
the options/view level; the value is a DNS name. Setting the
Agent-Domain to the root zone (".") disables the option.
When this value has been set, incoming queries matchng the form
_er.<qtype>.<qname>.<extended-error-code>._er.<agent-domain>/TXT
will be logged to the dns-reporting-agent channel at INFO level.
(Note: error reporting queries will only be accepted if sent via
TCP or with a good server cookie. If neither is present, named
returns BADCOOKIE to complete the DNS COOKIE handshake, or TC=1
to switch the client to TCP.)
Unify libcrypto initialization and explicit digest fetching in a single
place and move relevant code to the isc__crypto namespace instead of
isc__tls.
It will remove the remaining implicit fetching and deduplicate explicit
fetching inside the codebase.
The <openssl/hmac.h> header was unused and including the
header might cause build failure when OpenSSL doesn't have
Engines support enabled.
See https://fedoraproject.org/wiki/Changes/OpensslDeprecateEngine
Removes unused hmac includes after Remove OpenSSL Engine support
(commit ef7aba7072) removed engine
support.
Currently, the outgoing UDP sockets have enabled
SO_REUSEADDR (SO_REUSEPORT on BSDs) which allows multiple UDP sockets to
bind to the same address+port. There's one caveat though - only a
single (the last one) socket is going to receive all the incoming
traffic. This in turn could lead to incoming DNS message matching to
invalid dns_dispatch and getting dropped.
Disable setting the SO_REUSEADDR on the outgoing UDP sockets. This
needs to be done explicitly because `uv_udp_open()` silently enables the
option on the socket.
This commit adds support for timestamps in iso8601 format with timezone
when logging. This is exposed through the iso8601-tzinfo printtime
suboption.
It also makes the new logging format the default for -g output,
hopefully removing the need for custom timestamp parsing in scripts.
As the relaxed memory ordering doesn't ensure any memory
synchronization, it is possible that the increment will succeed even
in the case when it should not - there is a race between
atomic_fetch_sub(..., acq_rel) and atomic_fetch_add(..., relaxed).
Only the result is consistent, but the previous value for both calls
could be same when both calls are executed at the same time.
This change uses uv_get_total_memory() to get the memory available to
BIND 9 with possible modification by uv_get_constrained_memory() if the
libuv version is recent enough to honour constraints created by
f.e. cgroups.
The OpenBSD doesn't have sysctlbyname(), but sysctl() can be used to
read the number of online/available CPUs by reading following MIB(s):
[CTL_HW, HW_NCPUONLINE] with fallback to [CTL_HW, HW_NCPU].
Cleanup various checks and cleanups that are available on the all
platforms like sysctlbyname() and various related <sys/*.h> headers
that are either defined in POSIX or available on Linux and all BSDs.
Instead of cooking up our own code for getting the number of available
CPUs for named to use, make use of uv_available_parallelism() from
libuv >= 1.44.0.
If the operating system UDP queue gets full and the outgoing UDP sending
starts to be delayed, BIND 9 could exhibit memory spikes as it tries to
enqueue all the outgoing UDP messages. As those are not going to be
delivered anyway (as we argued when we stopped enlarging the operating
system send and receive buffers), try to send the UDP messages directly
using `uv_udp_try_send()` and if that fails, drop the outgoing UDP
message.
We currently set SO_INCOMING_CPU incorrectly, and testing by Ondrej
shows that fixing the issue and setting affinities is worse than letting
the kernel schedule threads without constraints. So we should not set
SO_INCOMING_CPU anymore.
Add an extra thread that can be used to offload operations that would
affect latency, but are not long-running tasks; those are handled by
isc_work API.
Each isc_loop now has matching isc_helper thread that also built on top
of uv_loop. In fact, it matches most of the isc_loop functionality, but
only the `isc_helper_run()` asynchronous call is exposed.
Administrators may wish to constrain the set of cores that BIND 9 runs
on via the 'taskset', 'cpuset' or 'numactl' programs (or equivalent on
other O/S), for example to achieve higher (or more stable) performance
by more closely associating threads with individual NIC rx queues. If
the admin has used taskset, it follows that BIND ought to
automatically use the given number of CPUs rather than the system wide
count.
Co-Authored-By: Ray Bellis <ray@isc.org>
Although the nanual page of malloc_usable_size says:
Although the excess bytes can be over‐written by the application
without ill effects, this is not good programming practice: the
number of excess bytes in an allocation depends on the underlying
implementation.
it looks like the premise is broken with _FORTIFY_SOURCE=3 on newer
systems and it might return a value that causes program to stop with
"buffer overflow" detected from the _FORTIFY_SOURCE. As we do have own
implementation that tracks the allocation size that we can use to track
the allocation size, we can stop relying on this introspection function.
Also the newer manual page for malloc_usable_size changed the NOTES to:
The value returned by malloc_usable_size() may be greater than the
requested size of the allocation because of various internal
implementation details, none of which the programmer should rely on.
This function is intended to only be used for diagnostics and
statistics; writing to the excess memory without first calling
realloc(3) to resize the allocation is not supported. The returned
value is only valid at the time of the call.
Remove usage of both malloc_usable_size() and malloc_size() to be on the
safe size and only use the internal size tracking mechanism when
jemalloc is not available.
The new
isc_log_createandusechannel() function combines following calls:
isc_log_createchannel()
isc_log_usechannel()
calls into a single call that cannot fail and therefore can be used in
places where we know this cannot fail thus simplifying the error
handling.
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
The isc_log_write1() and isc_log_vwrite1() functions were meant to
de-duplicate the messages sent to the isc_log subsystem. However, they
were never used in an entire code base and the whole mechanism around it
was complicated and very inefficient. Just remove those, there are
better ways to deduplicate syslog messages inside syslog daemons now.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
Instead of juggling different logging context, use one single logging
context that gets initialized in the libisc constructor and destroyed in
the libisc destructor.
The application is still responsible for creating the logging
configuration before using the isc_log API.
This patch is first in the series in a way that it is transparent for
the users of the isc_log API as the isc_log_create() and
isc_log_destroy() are now thin shims that emulate the previous
functionality, but it isc_log_create() will always return internal
isc__lctx pointer and isc_log_destroy() will actually not destroy the
internal isc__lctx context.
Signed-off-by: Ondřej Surý <ondrej@isc.org>
Instead of directly using the result of dirfd() in the unlinkat() call,
check whether the returned file descriptor is actually valid. That
doesn't really change the logic as the unlinkat() would fail with
invalid descriptor anyway, but this is cleaner and will report the right
error returned directly by dirfd() instead of EBADF from unlinkat().
