Coverity showed that the return value of `dst_key_gettime` was
unchecked in INITIALIZE_STATE. If DST_TIME_CREATED was not set we
would set the state to be initialized to a weird last changed time.
This would normally not happen because DST_TIME_CREATED is always
set. However, we would rather set the time to now (as the comment
also indicates) not match the creation time.
The comment on INITIALIZE_STATE also needs updating as we no
longer always initialize to HIDDEN.
When dnssec-policy was introduced, it implicitly set inline-signing.
But DNSSEC maintenance required either inline-signing to be enabled,
or a dynamic zone. In other words, not in all cases you want to
DNSSEC maintain your zone with inline-signing.
Change the behavior and determine whether inline-signing is
required: if the zone is dynamic, don't use inline-signing,
otherwise implicitly set it.
You can also explicitly set inline-signing to yes with dnssec-policy,
the restriction that both inline-signing and dnssec-policy cannot
be set at the same time is now lifted.
However, 'inline-signing no;' on a non-dynamic zone with a
dnssec-policy is not possible.
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
There was a missing indirection for the pluginlist_cb_t *callback in the
declaration of the cfg_pluginlist_foreach function. Reported by MSVC as:
lib\isccfg\parser.c(4057): warning C4028: formal parameter 4 different from declaration
Due to a way the stdatomic.h shim is implemented on Windows, the MSVC
always things that the outside type is the largest - atomic_(u)int_fast64_t.
This can lead to false positives as this one:
lib\dns\adb.c(3678): warning C4477: 'fprintf' : format string '%u' requires an argument of type 'unsigned int', but variadic argument 2 has type 'unsigned __int64'
We workaround the issue by loading the value in a scoped local variable
with correct type first.
MSVC documentation states: "This warning can be caused when a pointer to
a const or volatile item is assigned to a pointer not declared as
pointing to const or volatile."
Unfortunately, this happens when we dynamically allocate and deallocate
block of atomic variables using isc_mem_get and isc_mem_put.
Couple of examples:
lib\isc\hp.c(134): warning C4090: 'function': different 'volatile' qualifiers [C:\builds\isc-projects\bind9\lib\isc\win32\libisc.vcxproj]
lib\isc\hp.c(144): warning C4090: 'function': different 'volatile' qualifiers [C:\builds\isc-projects\bind9\lib\isc\win32\libisc.vcxproj]
lib\isc\stats.c(55): warning C4090: 'function': different 'volatile' qualifiers [C:\builds\isc-projects\bind9\lib\isc\win32\libisc.vcxproj]
lib\isc\stats.c(87): warning C4090: 'function': different 'volatile' qualifiers [C:\builds\isc-projects\bind9\lib\isc\win32\libisc.vcxproj]
The InterlockedOr8() and InterlockedAnd8() first argument was cast
to (atomic_int_fast8_t) instead of (atomic_int_fast8_t *), this was
reported by MSVC as:
warning C4024: '_InterlockedOr8': different types for formal and actual parameter 1
warning C4024: '_InterlockedAnd8': different types for formal and actual parameter 1
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
The assembly code generated by MSVC for at least some signed comparisons
involving atomic variables incorrectly uses unsigned conditional jumps
instead of signed ones. In particular, the checks in isc_log_wouldlog()
are affected in a way which breaks logging on Windows and thus also all
system tests involving a named instance. Work around the issue by
assigning the values returned by atomic_load_acquire() calls in
isc_log_wouldlog() to local variables before performing comparisons.
BIND wasn't honoring option "deny-answer-aliases" when configured to
forward queries.
Before the fix it was possible for nameservers listed in "forwarders"
option to return CNAME answers pointing to unrelated domains of the
original query, which could be used as a vector for rebinding attacks.
The fix ensures that BIND apply filters even if configured as a forwarder
instance.
(cherry picked from commit af6a4de3d5ad6c1967173facf366e6c86b3ffc28)
In case of normal fetch, the .recursionquota is attached and
ns_statscounter_recursclients is incremented when the fetch is created. Then
the .recursionquota is detached and the counter decremented in the
fetch_callback().
In case of prefetch or rpzfetch, the quota is attached, but the counter is not
incremented. When we reach the soft-quota, the function returns early but don't
detach from the quota, and it gets destroyed during the ns_client_endrequest(),
so no memory was leaked.
But because the ns_statscounter_recursclients is only incremented during the
normal fetch the counter would be incorrectly decremented on two occassions:
1) When we reached the softquota, because the quota was not properly detached
2) When the prefetch or rpzfetch was cancelled mid-flight and the callback
function was never called.
Rather than group key ids together, group key id with its
corresponding counters. This should make growing / shrinking easier
than having keyids then counters.
The first attempt to add DNSSEC sign statistics was naive: for each
zone we allocated 64K counters, twice. In reality each zone has at
most four keys, so the new approach only has room for four keys per
zone. If after a rollover more keys have signed the zone, existing
keys are rotated out.
The DNSSEC sign statistics has three counters per key, so twelve
counters per zone. First counter is actually a key id, so it is
clear what key contributed to the metrics. The second counter
tracks the number of generated signatures, and the third tracks
how many of those are refreshes.
This means that in the zone structure we no longer need two separate
references to DNSSEC sign metrics: both the resign and refresh stats
are kept in a single dns_stats structure.
Incrementing dnssecsignstats:
Whenever a dnssecsignstat is incremented, we look up the key id
to see if we already are counting metrics for this key. If so,
we update the corresponding operation counter (resign or
refresh).
If the key is new, store the value in a new counter and increment
corresponding counter.
If all slots are full, we rotate the keys and overwrite the last
slot with the new key.
Dumping dnssecsignstats:
Dumping dnssecsignstats is no longer a simple wrapper around
isc_stats_dump, but uses the same principle. The difference is that
rather than dumping the index (key tag) and counter, we have to look
up the corresponding counter.
If we initialize goals on all keys, superfluous keys that match
the policy all desire to be active. For example, there are six
keys available for a policy that needs just two, we only want to
set the goal state to OMNIPRESENT on two keys, not six.
Migrating from 'auto-dnssec maintain;' to dnssec-policy did not
work properly, mainly because the legacy keys were initialized
badly. Earlier commit deals with migration where existing keys
match the policy. This commit deals with migration where existing
keys do not match the policy. In that case, named must not
immediately delete the existing keys, but gracefully roll to the
dnssec-policy.
However, named did remove the existing keys immediately. This is
because the legacy key states were initialized badly. Because
those keys had their states initialized to HIDDEN or RUMOURED, the
keymgr decides that they can be removed (because only when the key
has its states in OMNIPRESENT it can be used safely).
The original thought to initialize key states to HIDDEN (and
RUMOURED to deal with existing keys) was to ensure that those keys
will go through the required propagation time before the keymgr
decides they can be used safely. However, those keys are already
in the zone for a long time and making the key states represent
otherwise is dangerous: keys may be pulled out of the zone while
in fact they are required to establish the chain of trust.
Fix initializing key states for existing keys by looking more closely
at the time metadata. Add TTL and propagation delays to the time
metadata and see if the DNSSEC records have been propagated.
Initialize the state to OMNIPRESENT if so, otherwise initialize to
RUMOURED. If the time metadata is in the future, or does not exist,
keep initializing the state to HIDDEN.
The added test makes sure that new keys matching the policy are
introduced, but existing keys are kept in the zone until the new
keys have been propagated.
Migrating from 'auto-dnssec maintain;' to dnssec-policy did not
work properly, mainly because the legacy keys were initialized
badly. Several adjustments in the keymgr are required to get it right:
- Set published time on keys when we calculate prepublication time.
This is not strictly necessary, but it is weird to have an active
key without the published time set.
- Initalize key states also before matching keys. Determine the
target state by looking at existing time metadata: If the time
data is set and is in the past, it is a hint that the key and
its corresponding records have been published in the zone already,
and the state is initialized to RUMOURED. Otherwise, initialize it
as HIDDEN. This fixes migration to dnssec-policy from existing
keys.
- Initialize key goal on keys that match key policy to OMNIPRESENT.
These may be existing legacy keys that are being migrated.
- A key that has its goal to OMNIPRESENT *or* an active key can
match a kasp key. The code was changed with CHANGE 5354 that
was a bugfix to prevent creating new KSK keys for zones in the
initial stage of signing. However, this caused problems for
restarts when rollovers are in progress, because an outroducing
key can still be an active key.
The test for this introduces a new KEY property 'legacy'. This is
used to skip tests related to .state files.
The rwlock introduced to protect the .logconfig member of isc_log_t
structure caused a significant performance drop because of the rwlock
contention. It was also found, that the debug_level member of said
structure was not protected from concurrent read/writes.
The .dynamic and .highest_level members of isc_logconfig_t structure
were actually just cached values pulled from the assigned channels.
We introduced an even higher cache level for .dynamic and .highest_level
members directly into the isc_log_t structure, so we don't have to
access the .logconfig member in the isc_log_wouldlog() function.
After an RPZ zone is updated via zone transfer, the RPZ summary
database is updated, inserting the newly added names in the policy
zone and deleting the newly removed ones. The first part of this
was quantized so it would not run too long and starve other tasks
during large updates, but the second part was not quantized, so
that an update in which a large number of records were deleted
could cause named to become briefly unresponsive.
We could have a race between handle closing and processing async
callback. Deactivate the handle before issuing the callback - we
have the socket referenced anyway so it's not a problem.
We introduce a isc_quota_attach_cb function - if ISC_R_QUOTA is returned
at the time the function is called, then a callback will be called when
there's quota available (with quota already attached). The callbacks are
organized as a LIFO queue in the quota structure.
It's needed for TCP client quota - with old networking code we had one
single place where tcp clients quota was processed so we could resume
accepting when the we had spare slots, but it's gone with netmgr - now
we need to notify the listener/accepter that there's quota available so
that it can resume accepting.
Remove unused isc_quota_force() function.
The isc_quote_reserve and isc_quota_release were used only internally
from the quota.c and the tests. We should not expose API we are not
using.
The 3 warnings reported are:
os.c:872:7: warning: Although the value stored to 'ptr' is used in the enclosing expression, the value is never actually read from 'ptr'
if ((ptr = strtok_r(command, " \t", &last)) == NULL) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
--
rpz.c:1117:10: warning: Although the value stored to 'zbits' is used in the enclosing expression, the value is never actually read from 'zbits'
return (zbits &= x);
^ ~
1 warning generated.
--
openssleddsa_link.c:532:10: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
while ((err = ERR_get_error()) != 0) {
^ ~~~~~~~~~~~~~~~
1 warning generated.
tcpdns used transport-specific functions to operate on the outer socket.
Use generic ones instead, and select the proper call in netmgr.c.
Make the missing functions (e.g. isc_nm_read) generic and add type-specific
calls (isc__nm_tcp_read). This is the preparation for netmgr TLS layer.
In isc_log_woudlog() the .logconfig member of isc_log_t structure was
accessed unlocked on the merit that there could be just a race when
.logconfig would be NULL, so the message would not be logged. This
turned not to be true, as there's also data race deeper. The accessed
isc_logconfig_t object could be in the middle of destruction, so the
pointer would be still non-NULL, but the structure members could point
to a chunk of memory no longer belonging to the object. Since we are
only accessing integer types (the log level), this would never lead to
a crash, it leads to memory access to memory area no longer belonging to
the object and this a) wrong, b) raises a red flag in thread-safety tools.
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
On Windows, C11 localtime_r() and gmtime_r() functions are not
available. While localtime() and gmtime() functions are already thread
safe because they use Thread Local Storage, it's quite ugly to #ifdef
around every localtime_r() and gmtime_r() usage to make the usage also
thread-safe on POSIX platforms.
The commit adds wrappers around Windows localtime_s() and gmtime_s()
functions.
NOTE: The implementation of localtime_s and gmtime_s in Microsoft CRT
are incompatible with the C standard since it has reversed parameter
order and errno_t return type.
