Clang added support for the gcc-style fallthrough
attribute (i.e. __attribute__((fallthrough))) in version 10. However,
__has_attribute(fallthrough) will return 1 in C mode in older versions,
even though they only support the C++11 fallthrough attribute. At best,
the unsupported attribute is simply ignored; at worst, it causes errors.
The C2x fallthrough attribute has the advantages of being supported in
the broadest range of clang versions (added in version 9) and being easy
to check for support. Use C2x [[fallthrough]] attribute if possible, and
fall back to not using an attribute for clang versions that don't have
it.
Courtesy of Joshua Root
(cherry picked from commit 14c8d43863)
Add a new parameter to the dst_key structure, mark a key modified if
dst_key_(un)set[bool,num,state,time] is called. Only write out key
files during a keymgr run if the metadata has changed.
(cherry picked from commit 1da91b3ab4)
The ns_statscounter_recursclients counter was previously only
incremented or decremented if client->recursionquota was non-NULL.
This was harmless, because that value should always be non-NULL if
recursion is enabled, but it made the code slightly confusing.
(cherry picked from commit 0201eab655)
Since commit bad5a523c2, when the fetches-per-server quota
was increased or decreased, instead of the value being set to
the newly calculated quota, it was set to the *minimum* of
the new quota or 1 - which effectively meant it was always set to 1.
it should instead have been the maximum, to prevent the value from
ever dropping to zero.
(cherry picked from commit 694bc50273)
When attaching to the trampoline, the isc__trampoline_max was access
unlocked. This would not manifest under normal circumstances because we
initialize 65 trampolines by default and that's enough for most
commodity hardware, but there are ARM machines with 128+ cores where
this would be reported by ThreadSanitizer.
Add locking around the code in isc__trampoline_attach(). This also
requires the lock to leak on exit (along with memory that we already)
because a new thread might be attaching to the trampoline while we are
running the library destructor at the same time.
(cherry picked from commit 933162ae14)
This commit fixes a crash in generic TLS stream code, which could be
reproduced during some runs of the 'sslyze' tool.
The intention of this commit is twofold.
Firstly, it ensures that the TLS socket object cannot be destroyed too
early. Now it is being deleted alongside the underlying TCP socket
object.
Secondly, it ensures that the TLS socket object cannot be destroyed as
a result of calling 'tls_do_bio()' (the primary function which
performs encryption/decryption during the IO) as the code did not
expect that. This code path is fixed now.
(cherry picked from commit a696be6a2d)
inet_ntop result should always protect against empty string accepted
without an error. Make additional check to satisfy coverity scans.
(cherry picked from commit 656a0f076f)
Coverity detected issues:
- var_decl: Declaring variable "diff" without initializer.
- uninit_use_in_call: Using uninitialized value "diff.tuples.head" when
calling "dns_diff_clear".
(cherry picked from commit 67e773c93c)
The DNS catalog zones draft version 5 document requires that catalog
zones consumers must reset the member zone's internal zone state when
its unique label changes (either within the same catalog zone or
during change of ownership performed using the "coo" property).
BIND already behaves like that, and, in fact, doesn't support keeping
the zone state during change of ownership even if the unique label
has been kept the same, because BIND always removes the member zone
and adds it back during unique label renaming or change of ownership.
Document the described behavior and add a log message to inform when
unique label renaming occurs.
Add a system test case with unique label renaming.
(cherry picked from commit 2f2e02ff0c)
We check the `rdclass` to be of type IN in `dns_catz_update_process()`
function, and all the other static functions where similar checks exist
are called after (and in the result of) that function being called,
so they are effectively redundant.
(cherry picked from commit 84d3aba4f3)
The DNS catalog zones draft version 5 document describes various
situations when a catalog zones must be considered as "broken" and
not be processed.
Implement those checks in catz.c and add corresponding system tests.
(cherry picked from commit a8228d5f19)
This commit adds support for Strict/Mutual TLS into BIND. It does so
by implementing the backing code for 'hostname' and 'ca-file' options
of the 'tls' statement. The commit also updates the documentation
accordingly.
This commit adds support for ISC_R_TLSBADPEERCERT error code, which is
supposed to be used to signal for TLS peer certificates verification
in dig and other code.
The support for this error code is added to our TLS and TLS DNS
implementations.
This commit also adds isc_nm_verify_tls_peer_result_string() function
which is supposed to be used to get a textual description of the
reason for getting a ISC_R_TLSBADPEERCERT error.
This commit adds support for keeping CA certificates stores associated
with TLS contexts. The intention is to keep one reusable store per a
set of related TLS contexts.
This commit adds a set of functions that can be used to implement
Strict and Mutual TLS:
* isc_tlsctx_load_client_ca_names();
* isc_tlsctx_load_certificate();
* isc_tls_verify_peer_result_string();
* isc_tlsctx_enable_peer_verification().
This commit adds a set of high-level utility functions to manipulate
the certificate stores. The stores are needed to implement TLS
certificates verification efficiently.
Add DNS extended errors 3 (Stale Answer) and 19 (Stale NXDOMAIN Answer)
to responses. Add extra text with the reason why the stale answer was
returned.
To test, we need to change the configuration such that for the first
set of tests the stale-refresh-time window does not interfer with the
expected extended errors.
(cherry picked from commit c66b9abc0b)
The shutdown test sends 'rdnc status' commands in parallel with
'rndc stop' A new rndc connection arriving will reference the ACL
environment to see whether the client is allowed to connect.
Commit c0995bc380 added a mutex lock to ns_interfacemgr_getaclenv(),
but if the new connection arrives while the interfaces are being
purged during shutdown, that lock is already being held. If the
the connection event slips in ahead of one of the netmgr's "stop
listening" events on a worker thread, a deadlock can occur.
The fix is not to hold the interfacemgr lock while shutting down
interfaces; only while actually traversing the interface list to
identify interfaces needing shutdown.
(cherry picked from commit 5c4cf3fcc4)
previously fctx_done() detached the fctx but did not clear the pointer
passed into it from the caller. in some conditions, when rctx_done()
was reached while waiting for a validator to complete, fctx_done()
could be called twice on the same fetch, causing a double detach.
fctx_done() now clears the fctx pointer, to reduce the chances of
such mistakes.
(cherry picked from commit b4592d02a1)
This commit makes use of isc_nmsocket_set_tlsctx(). Now, instead of
recreating TLS-enabled listeners (including the underlying TCP
listener sockets), only the TLS context in use is replaced.
This commit adds isc_nmsocket_set_tlsctx() - an asynchronous function
that replaces the TLS context within a given TLS-enabled listener
socket object. It is based on the newly added reference counting
functionality.
The intention of adding this function is to add functionality to
replace a TLS context without recreating the whole socket object,
including the underlying TCP listener socket, as a BIND process might
not have enough permissions to re-create it fully on reconfiguration.
The implementation is done on top of the reference counting
functionality found in OpenSSL/LibreSSL, which allows for avoiding
wrapping the object.
Adding this function allows using reference counting for TLS contexts
in BIND 9's codebase.
There is a possibility for `udp_recv()` to be called with `eresult`
being `ISC_R_SUCCESS`, but nevertheless with already deactivated `resp`,
which can happen when the request has been canceled in the meantime.
(cherry picked from commit e3a88862c0)
This commit ensures that write callbacks are getting called only after
the data has been sent via the network.
Without this fix, a situation could appear when a write callback could
get called before the actual encrypted data would have been sent to
the network. Instead, it would get called right after it would have
been passed to the OpenSSL (i.e. encrypted).
Most likely, the issue does not reveal itself often because the
callback call was asynchronous, so in most cases it should have been
called after the data has been sent, but that was not guaranteed by
the code logic.
Also, this commit removes one memory allocation (netievent) from a hot
path, as there is no need to call this callback asynchronously
anymore.
The interfacemgr and the .route was being detached while the network
manager had pending read from the socket. Instead of detaching from the
socket, we need to cancel the read which in turn will detach the route
socket and the associated interfacemgr.
(cherry picked from commit 9ae34a04e8)
The .lock, .exiting and .excl members were not using for anything else
than starting task exclusive mode, setting .exiting to true and ending
exclusive mode.
Remove all the stray members and dead code eliminating the task
exclusive mode use from ns_clientmgr.
(cherry picked from commit 4f74e1010e)
Now that the dns_aclenv_t has now properly rwlocked .localhost and
.localnets member, we can remove the task exclusive mode use from the
ns_interfacemgr. Some light related cleanup has been also done.
(cherry picked from commit c0995bc380)
In order to modify the .localhost and .localnets members of the
dns_aclenv, all other processing on the netmgr loops needed to be
stopped using the task exclusive mode. Add the isc_rwlock to the
dns_aclenv, so any modifications to the .localhost and .localnets can be
done under the write lock.
(cherry picked from commit 8138a595d9)
When we compile with libuv that has some capabilities via flags passed
to f.e. uv_udp_listen() or uv_udp_bind(), the call with such flags would
fail with invalid arguments when older libuv version is linked at the
runtime that doesn't understand the flag that was available at the
compile time.
Enforce minimal libuv version when flags have been available at the
compile time, but are not available at the runtime. This check is less
strict than enforcing the runtime libuv version to be same or higher
than compile time libuv version.
The rctx_chaseds() function calls dns_resolver_createfetch(), passing
fctx->task as the target task to run resume_dslookup() from. This
breaks task-based serialization of events as fctx->task is the task that
the dns_resolver_createfetch() caller wants to receive its fetch
completion event in; meanwhile, intermediate fetches started by the
resolver itself (e.g. related to QNAME minimization) must use
res->buckets[bucketnum].task instead. This discrepancy may cause
trouble if the resume_dslookup() callback happens to be run concurrently
with e.g. fctx_doshutdown().
Fix by passing the correct task to dns_resolver_createfetch() in
rctx_chaseds().
(cherry picked from commit 741a7096fc)
BIND 9 plugins are installed using Automake's pkglib_LTLIBRARIES stanza,
which causes the relevant shared objects to be placed in the
$(libdir)/@PACKAGE@/ directory, where @PACKAGE@ is expanded to the
lowercase form of the first argument passed to AC_INIT(), i.e. "bind".
Meanwhile, NAMED_PLUGINDIR - the preprocessor macro that the
ns_plugin_expandpath() function uses for determining the absolute path
to a plugin for which only a filename has been provided (rather than a
path) - is set to $(libdir)/named. This discrepancy breaks loading
plugins using just their filenames. Fix the issue (and also prevent it
from reoccurring) by setting NAMED_PLUGINDIR to $(pkglibdir).
(cherry picked from commit 5065c4686e)
Since version 5.0.0, decay-based purging is the only available dirty
page cleanup mechanism in jemalloc. It relies on so-called tickers,
which are simple data structures used for ensuring that certain actions
are taken "once every N times". Ticker data (state) is stored in a
thread-specific data structure called tsd in jemalloc parlance. Ticks
are triggered when extents are allocated and deallocated. Once every
1000 ticks, jemalloc attempts to release some of the dirty pages hanging
around (if any). This allows memory use to be kept in check over time.
This dirty page cleanup mechanism has a quirk. If the first
allocator-related action for a given thread is a free(), a
minimally-initialized tsd is set up which does not include ticker data.
When that thread subsequently calls *alloc(), the tsd transitions to its
nominal state, but due to a certain flag being set during minimal tsd
initialization, ticker data remains unallocated. This prevents
decay-based dirty page purging from working, effectively enabling memory
exhaustion over time. [1]
The quirk described above has been addressed (by moving ticker state to
a different structure) in jemalloc's development branch [2], but not in
any numbered jemalloc version released to date (the latest one being
5.2.1 as of this writing).
Work around the problem by ensuring that every thread spawned by
isc_thread_create() starts with a malloc() call. Avoid immediately
calling free() for the dummy allocation to prevent an optimizing
compiler from stripping away the malloc() + free() pair altogether.
An alternative implementation of this workaround was considered that
used a pair of isc_mem_create() + isc_mem_destroy() calls instead of
malloc() + free(), enabling the change to be fully contained within
isc__trampoline_run() (i.e. to not touch struct isc__trampoline), as the
compiler is not allowed to strip away arbitrary function calls.
However, that solution was eventually dismissed as it triggered
ThreadSanitizer reports when tools like dig, nsupdate, or rndc exited
abruptly without waiting for all worker threads to finish their work.
[1] https://github.com/jemalloc/jemalloc/issues/2251
[2] https://github.com/jemalloc/jemalloc/commit/c259323ab3082324100c708109dbfff660d0f4b8
(cherry picked from commit 7aa7b6474b)
The REQUIRE checks should be at the top of the function before
any assignments or code.
Move the REQUIRE check to the top.
(cherry picked from commit 99d1ec6c4b)
Ondřej Surý
Michal Nowak
Matthijs Mekking
Evan Hunt
Artem BoldarievandMichal Nowak
Mark Andrews
Petr MenšíkandMark Andrews
Aram Sargsyan
Michał Kępień