As generated documentation files are no longer stored in the BIND Git
repository, put a copy of the PDF version of the BIND ARM generated by
the "docs" GitLab CI job into the Windows zips to make it easily
available to the end users on that platform.
Make sure Windows zips also contain certain documentation files included
in source tarballs to make the contents of each release more consistent
across different platforms.
(cherry picked from commit 549ddca256)
Log diagnostic message when dns_name_issubdomain() in the fctx_create()
when the resolver is qname minimizing and forwarding at the same time.
(cherry picked from commit 0a22024c27)
Before this commit, BIND was unable to resolve ip6.arpa names like
the one reported in issue #1847 when using query minimization.
As reported in the issue, an attempt to resolve a name like
'rec-test-dom-158937817846788.test123.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.2.0.3.4.3.5.4.0.8.2.6.0.1.0.0.2.ip6.arpa'
using default settings would fail.
The reason was that query minimization algorithm in 'fctx_minimize_qname'
would divide any ip6.arpa names in increasing number of labels,
7,11, ... up to 35, thus limiting the destination name (minimized) to a number
of 35 labels.
In case the last query minimization attempt (with 35 labels) would fail with
NXDOMAIN, BIND would attempt the query mininimization again with the exact
same QNAME, limited on the 35 labels, and that in turn would fail again.
This fix avoids this fail loop by considering the extra labels that may appear
in the leftmost part of an ip6.arpa name, those after the IPv6 part.
(cherry picked from commit 230d79c191)
Log when named decides to add a CDS/CDNSKEY record to the zone. Now
you understand how the bug was found that was fixed in the previous
commits.
(cherry picked from commit f9ef5120c1)
The CDS/CDNSKEY record will be published when the DS is in the
rumoured state. However, with the introduction of the rndc '-checkds'
command, the logic in the keymgr was changed to prevent the DS
state to go in RUMOURED unless the specific command was given. Hence,
the CDS was never published before it was seen in the parent.
Initially I thought this was a policy approval rule, however it is
actually a DNSSEC timing rule. Remove the restriction from
'keymgr_policy_approval' and update the 'keymgr_transition_time'
function. When looking to move the DS state to OMNIPRESENT it will
no longer calculate the state from its last change, but from when
the DS was seen in the parent, "DS Publish". If the time was not set,
default to next key event of an hour.
Similarly for moving the DS state to HIDDEN, the time to wait will
be derived from the "DS Delete" time, not from when the DS state
last changed.
(cherry picked from commit c8205bfa0e)
While
if (isc_refcount_decrement() == 1) { // memory_order_release
isc_refcount_destroy(); // memory_order_acquire
...
}
is theoretically the most efficent in practice, using
memory_order_acq_rel produces the same code on x86_64 and doesn't
trigger tsan data races (which use a idealistic model) if
isc_refcount_destroy() is not called immediately. In fact
isc_refcount_destroy() could be removed if we didn't want
to check for the count being 0 when isc_refcount_destroy() is
called.
https://stackoverflow.com/questions/49112732/memory-order-in-shared-pointer-destructor
(cherry picked from commit 6278899a38)
It was discovered, that some systems might set EPROTO instead of EACCESS
on recvmsg() call causing spurious syslog messages from the socket
code. This commit returns soft handling of EPROTO errno code to the
socket code. [GL #1928]
(cherry picked from commit e0380d437d)
When calculating the new hashtable bitsize, there was an off-by-one
error that would allow the new bitsize to be larger than maximum allowed
causing assertion failure in the rehash() function.
(cherry picked from commit 78543ad5a7)
The rbtdb version glue_table has been refactored similarly to rbt.c hash
table, so it does use 32-bit hash function return values and apply
Fibonacci Hashing to lookup the index to the hash table instead of
modulo. For more details, see the lib/dns/rbt.c commit log.
(cherry picked from commit 01684cc219)
Shifting (signed) integer left could trigger undefined behaviour when
the shifted value would overflow into the sign bit (e.g. 2048).
The issue was found when using AFL++ and UBSAN:
message.c:2274:33: runtime error: left shift of 2048 by 20 places cannot be represented in type 'int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior message.c:2274:33 in
(cherry picked from commit a347641782)
sockaddr.c:147:49: error: pointer targets in passing argument 2 of ‘isc__buffer_putmem’ differ in signedness
rdata.c:1780:30: error: pointer targets in passing argument 2 of ‘isc__buffer_putmem’ differ in signedness
(cherry picked from commit dd425254a7)
base32_decode_char() added a extra zero octet to the output
if the fifth character was a pad character. The length
of octets to copy to the output was set to 3 instead of 2.
(cherry picked from commit 6c7e50c267)
Hold a weak reference to the view so that it can't go away while
nta is performing its lookups. Cancel nta timers once all external
references to the view have gone to prevent them triggering new work.
(cherry picked from commit 0b2555e8cf)
The hash table rework MRs (!3865, !3871) increased the default RBT hash
table size from 64 to 65,536 entries (for 64-bit architectures, that is
512 bytes before vs. 524,288 bytes after). This works fine for RBTs
used for cache databases, but since three separate RBT databases are
created for every zone loaded (RRs, NSEC, NSEC3), memory usage would
skyrocket when BIND 9 is used as an authoritative DNS server with many
zones.
The default RBT hash table size before the rework was 64 entries, this
commit reduces it to 16 entries because our educated guess is that most
zones are just couple of entries (SOA, NS, A, AAAA, MX) and rehashing
small hash tables is actually cheap. The rework we did in the previous
MRs tries to avoid growing the hash tables for big-to-huge caches where
growing the hash table comes at a price because the whole cache needs to
be locked.
(cherry picked from commit 1e043a011b)
(cherry picked from commit f0ccc17f30)
The hash table rework MRs (!3865, !3871) increased the default RBT hash
table size from 64 to 65,536 entries (for 64-bit architectures, that is
512 bytes before vs. 524,288 bytes after). This works fine for RBTs
used for cache databases, but since three separate RBT databases are
created for every zone loaded (RRs, NSEC, NSEC3), memory usage would
skyrocket when BIND 9 is used as an authoritative DNS server with many
zones.
The default RBT hash table size before the rework was 64 entries, this
commit reduces it to 16 entries because our educated guess is that most
zones are just couple of entries (SOA, NS, A, AAAA, MX) and rehashing
small hash tables is actually cheap. The rework we did in the previous
MRs tries to avoid growing the hash tables for big-to-huge caches where
growing the hash table comes at a price because the whole cache needs to
be locked.
(cherry picked from commit 1e043a011b)
In the rare case that you have multiple keys acting as KSK and that
have the same keytag, you can now set the algorithm when calling
'-checkds'.
(cherry picked from commit 46fcd927e7)
Don't strip off the final character when printing times in key files.
With the introduction of 'rndc dnssec -status' we introduced
'isc_stdtime_tostring()'. This changed in behavior such that it was no
longer needed to strip of the final '\n' of the string format
datetime. However, in 'printtime()' it still stripped the final
character.
(cherry picked from commit e3eb55fd1c)
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
(cherry picked from commit 04d8fc0143)
When pk11_numbits() is passed a user provided input that contains all
zeroes (via crafted DNS message), it would crash with assertion
failure. Fix that by properly handling such input.
QNAME minimization is normally disabled when forwarding. if, in the
course of processing a fetch, we switch back to normal recursion at
some point, we can't safely start minimizing because we may have
been left in an inconsistent state.
Each worker has a receive buffer with space for 20 DNS messages of up
to 2^16 bytes each, and the allocator function passed to uv_read_start()
or uv_udp_recv_start() will reserve a portion of it for use by sockets.
UDP can use recvmmsg() and so it needs that entire space, but TCP reads
one message at a time.
This commit introduces separate allocator functions for TCP and UDP
setting different buffer size limits, so that libuv will provide the
correct buffer sizes to each of them.
When a received RRSet has TTL 0, they would be preserved for
serve-stale (default `max-stale-cache` is 12 hours) rather than expiring
them quickly from the cache database.
This commit makes sure the RRSet didn't have TTL 0 before marking the
entry in the database as "stale".
(cherry picked from commit 6ffa2ddae0)
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
(cherry picked from commit ce53db34d6)
