There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
(cherry picked from commit ee122ba025)
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
(cherry picked from commit b61739836d)
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
(cherry picked from commit 2cb5a6210f)
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
(cherry picked from commit 3262ebd0f3)
DNS_LOGMODULE_RBTDB was simply inappropriate, and this
log message is actually dependent on db implementation
details, so DNS_LOGMODULE_DB would be the best choice.
(cherry picked from commit b0309ee631)
The new log message is emitted when adding or updating an RRset
fails due to exceeding the max-records-per-type limit. The log includes
the owner name and type, corresponding zone name, and the limit value.
It will be emitted on loading a zone file, inbound zone transfer
(both AXFR and IXFR), handling a DDNS update, or updating a cache DB.
It's especially helpful in the case of zone transfer, since the
secondary side doesn't have direct access to the offending zone data.
It could also be used for max-types-per-name, but this change
doesn't implement it yet as it's much less likely to happen
in practice.
(cherry picked from commit 4156995431)
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
(cherry picked from commit a6cce753e2)
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
(cherry picked from commit 99b4f01b33)
The 'dns' variable in dohpath can be in various forms ({?dns},
{dns}, {&dns} etc.). To check for a valid dohpath it ends up
being simpler to just parse the URI template rather than looking
for all the various forms if substring.
(cherry picked from commit af54ef9f5d)
Re-split format strings that had been poorly split by multiple
clang-format runs using different versions of clang-format.
(cherry picked from commit a24d6e1654)
There is a data race between the statistics channel, which uses
`dns_zone_getxfr()` to get a reference to `zone->xfr`, and the creation
of `zone->xfr`, because the latter happens outside of a zone lock.
Split the `dns_xfrin_create()` function into two parts to separate the
zone tranfer startring part from the zone transfer object creation part.
This allows us to attach the new object to a local variable first, then
attach it to `zone->xfr` under a lock, and only then start the transfer.
(cherry picked from commit dbf230650f)
The isc/crypto.h now directly includes the OpenSSL headers (evp.h) and
any application that includes that header also needs to have
OPENSSL_CFLAGS in the Makefile.am. Adjust the required automake files
as needed.
(cherry picked from commit 88103e72d5)
When canceling the ADB find, the lock on the find gets released for
a brief period of time to be locked again inside adbname lock. During
the brief period that the ADB find is unlocked, it can get canceled by
other means removing it from the adbname list which in turn causes
assertion failure due to a double removal from the adbname list.
Recheck if the find->adbname is still valid after acquiring the lock
again and if not just skip the double removal. Additionally, attach to
the adbname as in the worst case, the adbname might also cease to exist
if the scheduler would block this particular thread for a longer period
of time invalidating the lock we are going to acquire and release.
(cherry picked from commit 128e50e1ff)
Add an option to dnssec-ksr keygen, -o, to create KSKs instead of ZSKs.
This way, we can create a set of KSKS for a given period too.
For KSKs we also need to set timing metadata, including "SyncPublish"
and "SyncDelete". This functionality already exists in keymgr.c so
let's make the function accessible.
Replace dnssec-keygen calls with dnssec-ksr keygen for KSK in the
ksr system test and check keys for created KSKs as well. This requires
a slight modification of the check_keys function to take into account
KSK timings and metadata.
(cherry picked from commit 680aedb595)
Dispatch needs to know the transport that is being used over the
TCP connection to correctly allow for it to be reused. Add a
transport parameter to dns_dispatch_createtcp and dns_dispatch_gettcp
and use it when selecting a TCP socket for reuse.
(cherry picked from commit baab8a5d75)
When DSCP was removed the parsing of hostnames was accidentally
broken resulting in an assertion failure. Call cfg_parse_tuple
rather than using custom code in parse_sockaddrnameport.
(cherry picked from commit 6c095f89f5)
maxlabels is the suffix length that corresponds to the latest
NXDOMAIN response. minlabels is the suffix length that corresponds
to longest found existing name.
(cherry picked from commit 67f31c5046)
Prior to running the keymgr, first make sure that existing keys
are present in the new keylist. If not, treat this as an operational
error where the keys are made offline (temporarily), possibly unwanted.
(cherry picked from commit 5fdad05a8a)
Rename check_recursionquota() to acquire_recursionquota(), and
implement a new function called release_recursionquota() to
reverse the action. It helps with decreasing code duplication.
(cherry picked from commit 7bd44a4182)
In two places, after linking the client to the manager's
"recursing-clients" list using the check_recursionquota()
function, the query.c module fails to unlink it on error
paths. Fix the bugs by unlinking the client from the list.
Also make sure that unlinking happens before detaching the
client's handle, as it is the logically correct order, e.g.
in case if it's the last handle and ns__client_reset_cb()
can be called because of the detachment.
(cherry picked from commit 36c4808903)
The dns_zone_getxfrintime() function fails to lock the zone before
accessing its 'xfrintime' structure member, which can cause a data
race between soa_query() and the statistics channel. Add the missing
locking/unlocking pair, like it's done in numerous other similar
functions.
(cherry picked from commit ab07803465)
The 'nodetach' member is a leftover from the times when non-zero
'stale-answer-client-timeout' values were supported, and currently
is always 'false'. Clean up the member and its usage.
(cherry picked from commit b8c068835e)
Currently, the outgoing UDP sockets have enabled
SO_REUSEADDR (SO_REUSEPORT on BSDs) which allows multiple UDP sockets to
bind to the same address+port. There's one caveat though - only a
single (the last one) socket is going to receive all the incoming
traffic. This in turn could lead to incoming DNS message matching to
invalid dns_dispatch and getting dropped.
Disable setting the SO_REUSEADDR on the outgoing UDP sockets. This
needs to be done explicitly because `uv_udp_open()` silently enables the
option on the socket.
(cherry picked from commit eec30c33c2)
When matching the TCP dispatch responses, we should skip the responses
that do not belong to our TCP connection. This can happen with faulty
upstream server that sends invalid QID back to us.
(cherry picked from commit 4ef316e21e)
The dns_dispatch_add() function registers the 'resp' entry in
'disp->mgr->qids' hash table with 'resp->port' being 0, but in
tcp_recv_success(), when looking up an entry in the hash table
after a successfully received data the port is used, so if the
local port was set (i.e. it was not 0) it fails to find the
entry and results in an unexpected error.
Set the 'resp->port' to the given local port value extracted from
'disp->local'.
(cherry picked from commit d49a8f518a)
As the relaxed memory ordering doesn't ensure any memory
synchronization, it is possible that the increment will succeed even
in the case when it should not - there is a race between
atomic_fetch_sub(..., acq_rel) and atomic_fetch_add(..., relaxed).
Only the result is consistent, but the previous value for both calls
could be same when both calls are executed at the same time.
(cherry picked from commit 88227ea665)
Static-stub address and addresses from other sources where being
mixed together resulting in static-stub queries going to addresses
not specified in the configuration or alternatively static-stub
addresses being used instead of the real addresses.
(cherry picked from commit b3a2c790f3)
Query and response log shares the same flags. Move flags logging out of
log_query to share it with log_response. Use buffer instead of snprintf
to fill flags a bit faster.
Signed-off-by: Petr Menšík <pemensik@redhat.com>
(cherry picked from commit e6b19af2dd)
Remove answer flag from log, log instead count of records for each
message section. Include EDNS version and few flags of response. Add
also status of result.
Still does not include body of responses rrset.
(cherry picked from commit 6f879aba65)
Log to the querylog the rcode of a previous query using
the identifier 'response:' to diffenciate queries from
responses.
(cherry picked from commit 5fad79c92f)
An exit path in the dns_dispatch_add() function fails to get out of
the RCU critical section when returning early. Add the missing
rcu_read_unlock() call.
(cherry picked from commit 4123d59fbc)
The dns_dispatch_add() call in the dns_xfrin unit had hardcoded 30
second limit. This meant that any incoming transfer would be stopped in
it didn't finish within 30 seconds limit. Additionally, dns_xfrin
callback was ignoring the return value from dns_dispatch_getnext() when
restarting the reading from the TCP stream; this could cause transfers
to get stuck waiting for a callback that would never come due to the
dns_dispatch having already been shut down.
Call the dns_dispatch_add() without a timeout and properly handle the
result code from the dns_dispatch_getnext().
(cherry picked from commit 96ef98558c)
The dns_dispatch_add() has timeout parameter that could not be 0 (for
not timeout). Modify the dns_dispatch implementation to accept a zero
timeout for cases where the timeouts are undesirable because they are
managed externally.
(cherry picked from commit 0f810b3144)
when the QP cache was adapted from the RBT database, some names
weren't changed. this could be confusing, so let's change them now.
also, we no longer need to include rbt.h.
(cherry picked from commit 5a444838db)
