Add a new parameter to the dst_key structure, mark a key modified if
dst_key_(un)set[bool,num,state,time] is called. Only write out key
files during a keymgr run if the metadata has changed.
(cherry picked from commit 1da91b3ab4)
Since commit bad5a523c2, when the fetches-per-server quota
was increased or decreased, instead of the value being set to
the newly calculated quota, it was set to the *minimum* of
the new quota or 1 - which effectively meant it was always set to 1.
it should instead have been the maximum, to prevent the value from
ever dropping to zero.
(cherry picked from commit 694bc50273)
inet_ntop result should always protect against empty string accepted
without an error. Make additional check to satisfy coverity scans.
(cherry picked from commit 656a0f076f)
Coverity detected issues:
- var_decl: Declaring variable "diff" without initializer.
- uninit_use_in_call: Using uninitialized value "diff.tuples.head" when
calling "dns_diff_clear".
(cherry picked from commit 67e773c93c)
The DNS catalog zones draft version 5 document requires that catalog
zones consumers must reset the member zone's internal zone state when
its unique label changes (either within the same catalog zone or
during change of ownership performed using the "coo" property).
BIND already behaves like that, and, in fact, doesn't support keeping
the zone state during change of ownership even if the unique label
has been kept the same, because BIND always removes the member zone
and adds it back during unique label renaming or change of ownership.
Document the described behavior and add a log message to inform when
unique label renaming occurs.
Add a system test case with unique label renaming.
(cherry picked from commit 2f2e02ff0c)
We check the `rdclass` to be of type IN in `dns_catz_update_process()`
function, and all the other static functions where similar checks exist
are called after (and in the result of) that function being called,
so they are effectively redundant.
(cherry picked from commit 84d3aba4f3)
The DNS catalog zones draft version 5 document describes various
situations when a catalog zones must be considered as "broken" and
not be processed.
Implement those checks in catz.c and add corresponding system tests.
(cherry picked from commit a8228d5f19)
This commit adds support for Strict/Mutual TLS into BIND. It does so
by implementing the backing code for 'hostname' and 'ca-file' options
of the 'tls' statement. The commit also updates the documentation
accordingly.
This commit adds support for keeping CA certificates stores associated
with TLS contexts. The intention is to keep one reusable store per a
set of related TLS contexts.
previously fctx_done() detached the fctx but did not clear the pointer
passed into it from the caller. in some conditions, when rctx_done()
was reached while waiting for a validator to complete, fctx_done()
could be called twice on the same fetch, causing a double detach.
fctx_done() now clears the fctx pointer, to reduce the chances of
such mistakes.
(cherry picked from commit b4592d02a1)
There is a possibility for `udp_recv()` to be called with `eresult`
being `ISC_R_SUCCESS`, but nevertheless with already deactivated `resp`,
which can happen when the request has been canceled in the meantime.
(cherry picked from commit e3a88862c0)
In order to modify the .localhost and .localnets members of the
dns_aclenv, all other processing on the netmgr loops needed to be
stopped using the task exclusive mode. Add the isc_rwlock to the
dns_aclenv, so any modifications to the .localhost and .localnets can be
done under the write lock.
(cherry picked from commit 8138a595d9)
The rctx_chaseds() function calls dns_resolver_createfetch(), passing
fctx->task as the target task to run resume_dslookup() from. This
breaks task-based serialization of events as fctx->task is the task that
the dns_resolver_createfetch() caller wants to receive its fetch
completion event in; meanwhile, intermediate fetches started by the
resolver itself (e.g. related to QNAME minimization) must use
res->buckets[bucketnum].task instead. This discrepancy may cause
trouble if the resume_dslookup() callback happens to be run concurrently
with e.g. fctx_doshutdown().
Fix by passing the correct task to dns_resolver_createfetch() in
rctx_chaseds().
(cherry picked from commit 741a7096fc)
The REQUIRE checks should be at the top of the function before
any assignments or code.
Move the REQUIRE check to the top.
(cherry picked from commit 99d1ec6c4b)
Catalog zones change of ownership is special mechanism to facilitate
controlled migration of a member zone from one catalog to another.
It is implemented using catalog zones property named "coo" and is
documented in DNS catalog zones draft version 5 document.
Implement the feature using a new hash table in the catalog zone
structure, which holds the added "coo" properties for the catalog zone
(containing the target catalog zone's name), and the key for the hash
table being the member zone's name for which the "coo" property is being
created.
Change some log messages to have consistent zone name quoting types.
Update the ARM with change of ownership documentation and usage
examples.
Add tests which check newly the added features.
(cherry picked from commit bb837db4ee)
When there are multiple record datasets in a database node of a catalog
zone, and BIND encounters a soft error during processing of a dataset,
it breaks from the loop and doesn't process the other datasets in the
node.
There are cases when this is not desired. For example, the catalog zones
draft version 5 states that there must be a TXT RRset named
`version.$CATZ` with exactly one RR, but it doesn't set a limitation
on possible non-TXT RRsets named `version.$CATZ` existing alongside
with the TXT one. In case when one exists, we will get a processing
error and will not continue the loop to process the TXT RRset coming
next.
Remove the "break" statement to continue processing all record datasets.
(cherry picked from commit 0b2d5490cd)
When processing a new or updated catalog zone, the record datasets
from the database are being processed in order. This creates a
problem because we need to know the version of the catalog zone
schema to process some of the records differently, but we do not
know the version until the 'version' record gets processed.
Find the 'version' record and process it first, only then iterate over
the database to process the rest, making sure not to process the
'version' record twice.
(cherry picked from commit 6035980bb1)
According to DNS catalog zones draft version 5 document, catalog
zone custom properties must be placed under the "ext" label.
Make necessary changes to support the new custom properties syntax in
catalog zones with version "2" of the schema.
Change the default catalog zones schema version from "1" to "2" in
ARM to prepare for the new features and changes which come starting
from this commit in order to support the latest DNS catalog zones draft
document.
Make some restructuring in ARM and rename the term catalog zone "option"
to "custom property" to better reflect the terms used in the draft.
Change the version of 'catalog1.zone.' catalog zone in the "catz" system
test to "2", and leave the version of 'catalog2.zone.' catalog zone at
version "1" to test both versions.
Add tests to check that the new syntax works only with the new schema
version, and that the old syntax works only with the legacy schema
version catalog zones.
(cherry picked from commit cedfebc64a)
Update the function that synchronizes the CDS and CDNSKEY DELETE
records. It now allows for the possibility that the CDS DELETE record
is published and the CDNSKEY DELETE record is not, and vice versa.
Also update the code in zone.c how 'dns_dnssec_syncdelete()' is called.
With KASP, we still maintain the DELETE records our self. Otherwise,
we publish the CDS and CDNSKEY DELETE record only if they are added
to the zone. We do still check if these records can be signed by a KSK.
This change will allow users to add a CDS and/or CDNSKEY DELETE record
manually, without BIND removing them on the next zone sign.
Note that this commit removes the check whether the key is a KSK, this
check is redundant because this check is also made in
'dst_key_is_signing()' when the role is set to DST_BOOL_KSK.
(cherry picked from commit 3d05c99abb)
There are a couple of problems with dns_request_createvia(): a UDP
retry count of zero means unlimited retries (it should mean no
retries), and the overall request timeout is not enforced. The
combination of these bugs means that requests can be retried forever.
This change alters calls to dns_request_createvia() to avoid the
infinite retry bug by providing an explicit retry count. Previously,
the calls specified infinite retries and relied on the limit implied
by the overall request timeout and the UDP timeout (which did not work
because the overall timeout is not enforced). The `udpretries`
argument is also changed to be the number of retries; previously, zero
was interpreted as infinity because of an underflow to UINT_MAX, which
appeared to be a mistake. And `mdig` is updated to match the change in
retry accounting.
The bug could be triggered by zone maintenance queries, including
NOTIFY messages, DS parental checks, refresh SOA queries and stub zone
nameserver lookups. It could also occur with `nsupdate -r 0`.
(But `mdig` had its own code to avoid the bug.)
(cherry picked from commit 71ce8b0a51)
Previously, the RPZ updates ran quantized on the main nm_worker loops.
As the quantum was set to 1024, this might lead to service
interruptions when large RPZ update was processed.
Change the RPZ update process to run as the offloaded work. The update
and cleanup loops were refactored to do as little locking of the
maintenance lock as possible for the shortest periods of time and the db
iterator is being paused for every iteration, so we don't hold the rbtdb
tree lock for prolonged periods of time.
(cherry picked from commit f106d0ed2b)
Previously dns_rpz_add() were passed dns_rpz_zones_t and index to .zones
array. Because we actually attach to dns_rpz_zone_t, we should be using
the local pointer instead of passing the index and "finding" the
dns_rpz_zone_t again.
Additionally, dns_rpz_add() and dns_rpz_delete() were used only inside
rpz.c, so make them static.
(cherry picked from commit b6e885c97f)
Do a general cleanup of lib/dns/rpz.c style:
* Removed deprecated and unused functions
* Unified dns_rpz_zone_t naming to rpz
* Unified dns_rpz_zones_t naming to rpzs
* Add and use rpz_attach() and rpz_attach_rpzs() functions
* Shuffled variables to be more local (cppcheck cleanup)
(cherry picked from commit 840179a247)
the value of 'i' in generate could overflow when adding 'step' to
it in the 'for' loop. Use an unsigned int for 'i' which will give
an additional bit and prevent the overflow. The inputs are both
less than 2^31 and and the result will be less than 2^32-1.
(cherry picked from commit 5abdee9004)
In couple places, we have missed INSIST(0) or ISC_UNREACHABLE()
replacement on some branches with UNREACHABLE(). Replace all
ISC_UNREACHABLE() or INSIST(0) calls with UNREACHABLE().
There is a possible code path of using the uninitialized `bname`
character array while logging an error message.
Initialize the `bname` buffer earlier in the function.
Also, change the initialization routine to use a helper function.
(cherry picked from commit a5a6362e92)
A successful call to `dns_rdata_tostruct()` expects an accompanying
call to `dns_rdata_freestruct()` to free up any memory that could have
been allocated during the first call.
In catz.c there are several places where `dns_rdata_freestruct()` call
is skipped.
Add the missing cleanup routines.
(cherry picked from commit f57c51fe05)
Some ancient versions of clang reported uninitialized memory use false
positive (see https://bugs.llvm.org/show_bug.cgi?id=14461). Since clang
4.0.1 has been long obsoleted, just remove the workarounds.
(cherry picked from commit ae508c17bc)
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
(cherry picked from commit 20f0936cf2)
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
(cherry picked from commit 584f0d7a7e)
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
(cherry picked from commit fe7ce629f4)
In the GSS-TSIG verification code there was an alarming
variable-length array whose size came off the network, from the
signature in the request. It turned out to be safe, because the caller
had previously checked that the signature had a reasonable size.
However, the safety checks are in the generic TSIG implementation, and
the risky VLA usage was in the GSS-specific code, and they are
separated by the DST indirection layer, so it wasn't immediately
obvious that the risky VLA was in fact safe.
In fact this risky VLA was completely unnecessary, because the GSS
signature can be verified in place without being copied to the stack,
like the message covered by the signature. The `REGION_TO_GBUFFER()`
macro backwardly assigns the region in its left argument to the GSS
buffer in its right argument; this is just a pointer and length
conversion, without copying any data. The `gss_verify_mic()` call uses
both message and signature GSS buffers in a read-only manner.
(cherry picked from commit eeead1cfe7)
The clang-format-15 has new option InsertBraces that could add missing
branches around single line statements. Use that to our advantage
without switching to not-yet-released LLVM version to add missing braces
in couple of places.
The fetch can be in the shutting down state when resume_dslookup() is
trying to operate on it.
This is also a security issue, because a malicious actor can set up a
name server which delays certain queries in such a way that the fetch
will time out and shut down, which will cause named to crash.
Add a check to see if the fetch has the shutting down attribute set,
and cancel any further operations on it in such case.
A similar bug had been fixed earlier for the resume_qmin() function,
see [GL #966].
This is an optimisation as we can skip a lot of pointless work when we
know there is a DNAME there.
When we have a partial match and a DNAME above the QNAME, the closest
encloser has the same owner as the DNAME, will have the DNAME bit set
in the type map, and we wouldn't use it as we would return the
DNAME + RRSIG(DNAME) instead.
So there is no point in looking for it nor in attempting to check that
it is valid for the QNAME.
'setup_delegation' depends on 'foundname' being the value returned
by 'dns_rbt_findnode' in the cache and 'find_coveringnsec' was
modifying 'foundname' when a covering NSEC was not found.
When caching glue, we need to ensure that there is no closer
source of truth for the name. If the owner name for the glue
record would be answered by a locally configured zone, do not
cache.
When caching additional and glue data *not* from a forwarder, we must
check that there is no "forward only" clause covering the owner name
that would take precedence. Such names would normally be allowed by
baliwick rules, but a "forward only" zone introduces a new baliwick
scope.
If we are using a fowarder, in addition to checking that names to
be cached are subdomains of the forwarded namespace, we must also
check that there are no subsidiary forwarded namespaces which would
take precedence. To be safe, we don't cache any responses if the
forwarding configuration has changed since the query was sent.
