This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
This commit adds support for enforcing the preference of server
ciphers over the client ones. This way, the server attains control
over the ciphers priority and, thus, can choose more strong cyphers
when a client prioritises less strong ciphers over the more strong
ones, which is beneficial when trying to achieve Perfect Forward
Secrecy.
This commit adds support for setting TLS cipher list string in the
format specified in the OpenSSL
documentation (https://www.openssl.org/docs/man1.1.1/man1/ciphers.html).
The syntax of the cipher list is verified so that specifying the wrong
string will prevent the configuration from being loaded.
This commit adds support for loading DH-parameters (Diffie-Hellman
parameters) via the new "dhparam-file" option within "tls" clause. In
particular, Diffie-Hellman parameters are needed to enable the range
of forward-secrecy enabled cyphers for TLSv1.2, which are getting
silently disabled otherwise.
This commit adds the ability to specify allowed TLS protocols versions
within the "tls" clause. If an unsupported TLS protocol version is
specified in a file, the configuration file will not pass
verification.
Also, this commit adds strict checks for "tls" clauses verification,
in particular:
- it ensures that loading configuration files containing duplicated
"tls" clauses is not allowed;
- it ensures that loading configuration files containing "tls" clauses
missing "cert-file" or "key-file" is not allowed;
- it ensures that loading configuration files containing "tls" clauses
named as "ephemeral" or "none" is not allowed.
Previously a missing/deleted zone which was referenced by a catalog
zone was causing a crash when doing a reload.
This commit will make `named` to ignore the fact that the zone is
missing, and make sure to restore it later on.
This commit fixes heap use after free when checking BIND's
configuration files for errors with http clauses. The old code
was unnecessarially copying the http element name and freeing
it to early. The name is now used directly.
The old-style DLZ drivers were already marked as no longer actively
maintained and expected to be removed eventually. With the new automake
build system, the old-style DLZ drivers were not updated, and instead of
putting an effort into something that's not being maintained, let's
rather remove the unmaintained code.
Closes: #2814
Address the following warnings reported by PyLint 2.10.2:
************* Module tests-checkds
bin/tests/system/checkds/tests-checkds.py:70:9: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
bin/tests/system/checkds/tests-checkds.py:120:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
bin/tests/system/checkds/tests-checkds.py:206:17: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
************* Module yamlget
bin/tests/system/digdelv/yamlget.py:22:5: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
************* Module stress_http_quota
bin/tests/system/doth/stress_http_quota.py:131:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
************* Module tests-rpz-passthru-logging
bin/tests/system/rpzextra/tests-rpz-passthru-logging.py:40:9: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
bin/tests/system/rpzextra/tests-rpz-passthru-logging.py:44:9: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
- when transfer-source(-v6), query-source(-v6), notify-source(-v6)
or parental-source(-v6) are specified with a port number, issue a
warning.
- when the port specified is the same as the DNS listener port (i.e.,
53, or whatever was specified as "port" in "options"), issue a fatal
error.
- check that "port" is in range. (previously this was only checked
by named, not by named-checkconf.)
- added checkconf tests.
- incidental fix: removed dead code in check.c:bind9_check_namedconf().
(note: if the DNS port is specified on the command line with "named -p",
that is not conveyed to libbind9, so these checks will not take it into
account.)
The ns3->ns2 forwarding is now done using the IPv6 addresses, so we also
test that the query-source-v6 address is still operational after removal
of interface adjustment.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
when "checking lame server clients are dropped below the hard limit",
periodically a query is sent for a name for which the server is
authoritative, to verify that legitimate queries can still be
processed while the server is dealing with a flood of lame delegation
queries. those queries used the same dig options as elsewhere in the
fetchlimit test, including "+tries=1 +timeout=1". on slow systems, a
1-second timeout may be insufficient to get an answer even if the server
is behaving well. this commit increases the timeout for the check
queries to 2 seconds in hopes that will be enough to eliminate test
failures in CI.
This commit modifies the MTU of the loopback interface on
Linux systems to 1500, so that oversized UDP packets can
trigger EMSGSIZE errors, and tests that named handles
such errors correctly.
Note that the loopback MTU size has not yet been modified
for other platforms.
This commit ensures that DoH (and DoT) functionality works well via
IPv6 as well.
The changes were made because it turned out that dig could not make
DoH queries against an IPv6 IP address. These tests ensure that such a
bug will not remain unnoticed.
The commit also increases the servers' startup timeout to 25 seconds
because the initial timeout of 14 seconds was too short to generate
(!) eight 4096 bit ephemeral RSA certificates on a heavily loaded CI
runner in some pipeline runs.
This commit adds new function isc_nm_http_makeuri() which is supposed
to unify DoH URI construction throughout the codebase.
It handles IPv6 addresses, hostnames, and IPv6 addresses given as
hostnames properly, and replaces similar ad-hoc code in the codebase.
- removed unused functions
- changed some public functions to static that are never called
from outside client.c
- removed unused types and function prototypes
- renamed dns_client_destroy() to dns_client_detach()
The previous versions of BIND 9 exported its internal libraries so that
they can be used by third-party applications more easily. Certain
library functions were altered from specific BIND-only behavior to more
generic behavior when used by other applications.
This commit removes the function isc_lib_register() that was used by
external applications to enable the functionality.
test server now has tcp-idle-timeout set to 5 seconds and
tcp-keepalive-timeout set to 7, so queries that follow a 6-second sleep
should either succeed or fail depending on whether the keepalive option
was sent.
Add a statschannel test case to confirm that when keys are removed
(in this case because of a dnssec-policy change), the corresponding
dnssec-sign stats are cleared and are no longer shown in the
statistics.
Add a test case that has more than four keys (the initial number of
key slots that are created for dnssec-sign statistics). We shouldn't
be expecting weird values.
This fixes some errors in the manykeys zone configuration (keys
were created for algorithm RSASHA256, but the policy expected RSASHA1,
and the zone was not allowing dynamic updates).
This also fixes an error in the calls to 'zones-json.pl': The perl
script excepts an index number where the zone can be found, rather
than the zone name.
Add a test case for migrating CSK to dnssec-policy. The keymgr has no
way of telling that the key is used as a CSK, but if there is only one
key to migrate it is going to assume it must be a CSK.
Previously, when dnssec-cds copied CDS records to make DS records,
its -a algorithm option did not have any effect. This means that if
the child zone is signed with older software that generates SHA-1 CDS
records, dnssec-cds would (by default) create SHA-1 DS records in
violation of RFC 8624.
This change makes the dnssec-cds -a option apply to CDS records as
well as CDNSKEY records. In the CDS case, the -a algorithms are the
acceptable subset of possible CDS algorithms. If none of the CDS
records are acceptable, dnssec-cds tries to generate DS records from
CDNSKEY records.
The additional processing method has been expanded to take the
owner name of the record, as HTTPS and SVBC need it to process "."
in service form.
The additional section callback can now return the RRset that was
added. We use this when adding CNAMEs. Previously, the recursion
would stop if it detected that a record you added already exists. With
CNAMEs this rule doesn't work, as you ultimately care about the RRset
at the target of the CNAME and not the presence of the CNAME itself.
Returning the record allows the caller to restart with the target
name. As CNAMEs can form loops, loop protection was added.
As HTTPS and SVBC can produce infinite chains, we prevent this by
tracking recursion depth and stopping if we go too deep.
Artem Boldariev
Aram Sargsyan
Mark Andrews
Ondřej Surý
Michał Kępień
Evan HuntandOndřej Surý
Petr Špaček
Matthijs Mekking
Tony FinchandEvan Hunt