Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the EDE codes are directly copied into the ns_client
buffers by passing the EDE context to dns_resolver_createfetch().
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Co-authored-by: Colin Vidal <colin@isc.org>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
(cherry picked from commit 2f8e0edf3b)
If the generated status output exceeds 4096 it was silently truncated,
now we output that the status was truncated.
(cherry picked from commit 7ae7851173)
Commit 4555a31934 renamed the top-level
"primaries" block in bin/named/config.c to "remote-servers". This
configuration block lists the primary servers used for an IANA root zone
mirror when no primary servers are explicitly specified for it in the
configuration. However, the relevant part of the named_zone_configure()
function only looks for a top-level "primaries" block and not for any of
its synonyms. As a result, configuring an IANA root zone mirror with
just:
zone "." {
type mirror;
};
now results in a cryptic fatal error on startup:
loading configuration: not found
exiting (due to fatal error)
Fix by using the correct top-level block name in named_zone_configure().
(cherry picked from commit 010d2eb436)
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
(cherry picked from commit 1b2eadb197)
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
(cherry picked from commit b121f02eac)
Add a none parameter to named configuration option `query-source` (respectively `query-source-v6`) which forbid usage of IPv4 (respectively IPv6) addresses when named is doing an upstream query.
Closes#4981 Turning-off upstream IPv6 queries while still listening to downstream queries on IPv6.
Merge branch 'colin/querysource-none' into 'main'
See merge request isc-projects/bind9!9727
Backport of MR !9727
Some changes had to be done to the existing 9.20.x code in order to
make this backport compatible:
- first, the 9.20.x branches support the `port` parameter in
query-source[-v6], where 9.21.x does not. The original changes
depend on things that can't be backported because that would break
`port` support.
- second, the changes remove the optional `address` parameter from the
canonical form. So `query-source address <ip>` is now printed as
`query-source <ip>`. This means that `named-checkconf -p` will now
generate different output if users have `query-source address <ip>` or
`query-source address <ip> port <port>`; it will now generate
`query-source <ip>` or `query-source <ip> port <port>`. This is a
non-breaking change, because the parser has been updated to support
this form as well.
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
(cherry picked from commit f3af8a7dc3)
Changing the default for max-recursion-queries from 100 to 32 was too
strict in some cases, especially lookups in reverse IPv6 trees started
to fail more frequently. From issue #4921 it looks like 50 is a better
default.
Now that we have 'max-query-count' as a global limit of outgoing queries
per client request, we can increase the default for
'max-recursion-queries' again, as the number of recursive queries is
no longer bound by the multiple of 'max-recursion-queries' and
'max-query-restarts'.
(cherry picked from commit 84df920d9e)
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
(cherry picked from commit bbc16cc8e6)
In dns_zone_getdnssecsignstats, dns_zone_getrcvquerystats and
dns_zone_getrequeststats attach to the statistics structure.
(cherry picked from commit fb50a71159)
Commit 4b3d0c6600 has removed them, but
did not remove few traces in documentation and help. Remove them from
remaining places.
(cherry picked from commit 65b9eeb39a)
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
(cherry picked from commit d13e94b930)
Commit amended in order to fix usage of isc_log_write (adding dns_lctx
parameter)
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
(cherry picked from commit b61739836d)
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
(cherry picked from commit 2cb5a6210f)
Log to the querylog the rcode of a previous query using
the identifier 'response:' to diffenciate queries from
responses.
(cherry picked from commit 5fad79c92f)
The named_server_dumpdb() function, which is called when a 'rndc dumpdb'
command is issued, returns a 'isc_result_t' result code and it has been
always ignored since its introduction in
eb8713ed94, where it was still called
ns_server_dumpdb(). The orignal reasoning is not preserved, but it could
have been also a simple copy-paste mistake, as there are commands, which
return 'void' and require manually setting 'result = ISC_R_SUCCESS;', as
it was done here. Anyway, named will now return the actual result, and
'rndc' will report an error, when the 'dumpdb' command fails.
(cherry picked from commit 8b866ba8a0)
On systems where root access is needed to configure privileged
ports, we don't want to fully relinquish root privileges until
after the control channel (which typically runs on port 953) has
been established.
named_os_changeuser() now takes a boolean argument 'permanent'.
This allows us to switch the effective userid temporarily with
named_os_changeuser(false) and restore it with named_os_restoreuser(),
before permanently dropping privileges with named_os_changeuser(true).
(cherry picked from commit d57fa148af)
Add the code and documentation required to provide KSR import using
rndc. This is just the command, and the feature is at this point in
time still not implemented.
(cherry picked from commit edbb219fda)
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
(cherry picked from commit 0598381236)
named now prints its initial working directory during startup and the
changed working directory when loading or reloading its configuration
file if it has a valid 'directory' option defined.
(cherry picked from commit fd8e1d161f)
It looks like that all supported systems now have support for
_POSIX_SAVED_IDS, so it's safe to use setegid() and setegid() because
those will not change saved used/group IDs.
(cherry picked from commit ab517fc6e4)
The shim implementation of setresuid() was wrong - there was a copy and
paste error and it was calling setresgid() instead. This only affects
NetBSD because Linux, FreeBSD and OpenBSD have setresuid() and
setresgid() implementation available from the system library.
(cherry picked from commit 5567407a82)
As we now setup the logging very early, parsing the default config would
always print warnings about experimental (and possibly deprecated)
options in the default config. This would even mess with commands like
`named -V` and it is also wrong to warn users about using experimental
options in the default config, because they can't do anything about
this. Add CFG_PCTX_NODEPRECATED and CFG_PCTX_NOEXPERIMENTAL options
that we can pass to cfg parser and silence the early warnings caused by
using experimental options in the default config.
(cherry picked from commit 86f1ec34dc)
This condition in catalog zone processing functions is checked only
for sanity, so there is no meaning for a log message that normally
shouldn't be ever logged.
(cherry picked from commit 0b3c8ee55e6cda1f2de35aa15f6a4d82d072c309)
During a reconfiguration named doesn't reconfigure catalog zones
member zones. Implement the necessary code to reconfigure catz
member zones.
(cherry picked from commit fd71ed5d73ae2dc968e8782ce652fb8ef257c25e)
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
(cherry picked from commit 104f3b82fb)
When automatic-interface-scan is disabled, the route socket was still
being opened. Add new API to connect / disconnect from the route socket
only as needed.
Additionally, move the block that disables periodic interface rescans to
a place where it actually have access to the configuration values.
Previously, the values were being checked before the configuration was
loaded.
(cherry picked from commit b26079fdaf)
With this new optional argument if there is an ongoing zone
transfer it will be aborted before a new zone transfer is scheduled.
(cherry picked from commit 402ca316ae)
View matching on an incoming query checks the query's signature,
which can be a CPU-heavy task for a SIG(0)-signed message. Implement
an asynchronous mode of the view matching function which uses the
offloaded signature checking facilities, and use it for the incoming
queries.
This is a tiny helper function which is used only once and can be
replaced with two function calls instead. Removing this makes
supporting asynchronous signature checking less complicated.
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
Ondřej SurýandColin Vidal
Matthijs Mekking
Michał Kępień
Evan Hunt
Petr MenšíkandMark Andrews
Aram Sargsyan
Nicki Křížek
