Add a new field in the incoming zone transfers section of the
statistics channel to show the transport used for the SOA request.
When the transfer is started beginning from the XFRST_SOAQUERY state,
it means that the SOA query will be performed by xfrin itself, using
the same transport. Otherwise, it means that the SOA query was already
performed by other means (e.g. by zone.c:soa_query()), and, in that
case, we use the SOA query transport type information passed by the
'soa_transport_type' argument, when the xfrin object was created.
This allows the statistics channel to be viewed in a browser while
the transfer is in progress. Also set the transfer format to
one-answer to extend the amount of time the re-transfer takes.
When running the statschannel test on its own, use
<http://10.53.0.3:5304/xml/v3/xfrins> to see the output.
Note: the port is subject to future change.
Use the named -T transferslowly test options to slow down a zone
transfer from the primary server, and test that it's correctly
exposed in the statistics channel of the secondary server, while
it's in-progress.
Apply the semantic patch to catch all the places where we pass 'char' to
the <ctype.h> family of functions (isalpha() and friends, toupper(),
tolower()).
The Unix Domain Sockets support in BIND 9 has been completely disabled
since BIND 9.18 and it has been a fatal error since then. Cleanup the
code and the documentation that suggest that Unix Domain Sockets are
supported.
The previous symlink name convention was prone to name collisions If a
system test contained both a shell test and a pytest module of the same
name (e.g. dnstap test has both tests.sh and tests_dnstap.py), then
these would have the same convenience symlink, which could cause test
setup issues as well as confusion when examining test artifacts.
Update the naming convention to include the full pytest module name.
This results in a slightly more verbose names for shell tests (e.g.
dnstap_sh_dnstap instead of the previous dnstap_dnstap), but it removes
the chance of a collision.
Reorganize individual port fixtures and re-use the ports fixture to
obtain their number. Store it as integer and only cast it to string when
setting it as environment variable.
Remove code fork for legacy runner, reorganize imports and move a
pylint-silencing snippet to the top of the file. The rest of the code
was just unindented.
In order to python system tests, pytest (runner) has to be used
directly. This makes it possible to simplify the pytest runner and make
its behavior simpler and easier to extend.
The legacy runner can still be used to run shell system tests.
The legacy runner no longer uses make check. Ensure the legacy runner
script doesn't interact with that automake target in any way. The legacy
runner script remains available to execute the legacy runner, but there
is no out-of-the box support for running tests in parallel. Other tools
such as xargs can be utilized for that.
Pytest provides JUnit output and uses different exit codes from
Automake. Use the conversion script to interpret the JUnit test results
from python rather than relying on the status code.
It's important to parse the JUnit result file rather than relying on the
exit code from pytest, which has a different meaning. Include a .trs test
result for each test case and set an exit code which is most appropriate
as the aggregate result (e.g. it will be set to 77 (SKIP) if there's at
least one test case that was skipped).
Dependencies for these tests are already checked in prereq.sh - if the
dependencies are missing, these tests will be skipped. The extra
dependency check in Makefile.am is extraneous and only applied for the
legacy test runner.
To allow concurrent invocations of pytest, it is necessary to assign
ports properly to avoid conflicts. In order to do that, pytest needs to
know a complete list of all test modules.
When pytest is invoked from run.sh, the current working directory is the
system test directory. To properly detect other tests, the conftest.py
has to look in the bin/tests/system directory, rather than the current
working directory.
To conform with the expected naming convention, the pytest glue file for
the `allow-query` test should use underscore as the word separator in
the python file name: allow-query/tests_sh_allow_query.py
The _common directory is a special case directory which contains shared
files for other system test directories. Make sure it's tracked in git
and not deleted during temporary directory cleanup.
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
Reusing TCP connections with dns_dispatch_gettcp() used linear linked
list to lookup existing outgoing TCP connections that could be reused.
Replace the linked list with per-loop cds_lfht hashtable to speedup the
lookups. We use cds_lfht because it allows non-unique node insertion
that we need to check for dispatches in different connection states.
Instead of high number of dispatches (4 * named_g_udpdisp)[1], make the
dispatches bound to threads and make dns_dispatchset_t create a dispatch
for each thread (event loop).
This required couple of other changes:
1. The dns_dispatch_createudp() must be called on loop, so the isc_tid()
is already initialized - changes to nsupdate and mdig were required.
2. The dns_requestmgr had only a single dispatch per v4 and v6. Instead
of using single dispatch, use dns_dispatchset_t for each protocol -
this is same as dns_resolver.
Test resolver-use-dns64 by simulating a connection to an IPv4-only
server through a NAT64.
This test uses EXTRAPORT1 rather than PORT for DNS traffic exchanged
between ns3 and ns4. Both servers also listen on PORT on their IPv4
addresses to support server startup testing in start.pl.
Add a configuration option, resolver-use-dns64, which when true
will cause named to map IPv4 address to IPv6 addresses using the
view's DNS64 mapping rules when making iterative queries.
There are libraries which are reported in printversion(), but not
reported in setup(). Synchronize the functions, so that the log
file could have the same information as reported by the 'named -V'
command execution.
The autoconf and named -V now prints used version of jemalloc. This
doesn't work with system supplied jemalloc, so in it prints `system`
instead in the autoconf and nothing in named -V output.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature.
Remove the feature to simplify the code.
instead of allowing a NULL nametree in dns_nametree_covered(),
require nametree to exist, and ensure that the nametrees defined
for view and resolver objects are always created.
name trees can now hold either boolean values or bit fields. the
type is selected when the name tree is created.
the behavior of dns_nametree_add() differs slightly beteween the types:
in a boolean tree adding an existing name will return ISC_R_EXISTS,
but in a bitfield tree it simply sets the specified bit in the bitfield
and returns ISC_R_SUCCESS.
replace the use of RBTs for deny-answer-aliases, the exclude
lists for deny-answer-aliases and deny-answer-addresses, and
dnssec-must-be-secure, with name trees.
