Make sure the CYGWIN environment variable is set whenever system tests
are run on Windows to prevent stop.pl from making incorrect assumptions
about the environment it is running in, which triggers e.g. false
reports about named instances crashing on shutdown when system tests are
run on Windows. This issue has not been caught earlier because the
CYGWIN environment variable was incidentally being set on a higher level
in our Windows test environments.
Error reporting for parallel system tests on Windows has been broken all
along: since all parallel.mk targets generated by parallel.sh pipe their
output through "tee", the return code from run.sh is lost and thus
running "make -f parallel.mk check" will not yield a non-zero return
code if some system tests fail. The same applies to runsequential.sh.
Yet, runall.sh on Windows only sets its return code to a non-zero value
if either "make -f parallel.mk check" or runsequential.sh returns a
non-zero return code. Fix by making runall.sh yield a non-zero return
code when testsummary.sh fails, which is the same approach as the one
used in the "test" target in bin/tests/system/Makefile.
(cherry picked from commit fed397c04b)
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
(cherry picked from commit 0476e8f1ac)
named-checkzone does not use libbind9. Update the Visual Studio project
file template for named-checkzone to reflect that, thus preventing
compilation issues during parallel builds.
(cherry picked from commit 918ebd9830)
Make stderr fully buffered on Windows to improve named performance when
it is logging to stderr, which happens e.g. in system tests. Note that:
- line buffering (_IOLBF) is unavailable on Windows,
- fflush() is called anyway after each log message gets written to the
default stderr logging channels created by libisc.
(cherry picked from commit c72da3497d)
BIND system tests are run in a Cygwin environment. Apparently Cygwin
shell sets the SEM_NOGPFAULTERRORBOX bit in its process error mode which
is then inherited by all spawned child processes. This bit prevents the
Windows Error Reporting dialog from being displayed, which I assume is
part of an effort to contain memory handling errors triggered by Cygwin
binaries in the Cygwin environment. Unfortunately, this also prevents
automatic crash dump creation by Windows Error Reporting and Cygwin
itself does not handle memory errors in native Windows processes spawned
from a Cygwin shell.
Fix by clearing the SEM_NOGPFAULTERRORBOX bit inside named if it is
started in a Cygwin environment, thus overriding the Cygwin-set process
error mode in order to enable Windows Error Reporting to handle all
named crashes.
(cherry picked from commit 3d4b17806f)
When libxml2 is to be used in a multi-threaded application, the
xmlInitThreads() function must be called before any other libxml2
function. This function does different things on various platforms and
thus one can get away without calling it on Unix systems, but not on
Windows, where it initializes critical section objects used for
synchronizing access to data structures shared between threads. Add the
missing xmlInitThreads() call to prevent crashes on affected systems.
Also add a matching xmlCleanupThreads() call to properly release the
resources set up by xmlInitThreads().
(cherry picked from commit a3c0b00ef6)
Addresses the database changing w/o the changes being done under task lock.
Fix: build the database before assigning it to the zone.
(cherry picked from commit 4e686f40e0)
Commit 0a20176ca6 is an overly broad
backport: in BIND 9.11, dnssec-dsfromkey still defaults to outputting
both SHA-1 and SHA-256 digests. Ensure the documentation matches the
code by correcting the former.
Add a helper shell function, rndc_dumpdb(), which provides a convenient
way to call "rndc dumpdb" for a given server with optional additional
arguments. Since database dumping is an asynchronous process, the
function waits until the dump is complete before returning, which
prevents false positives in system tests caused by inspecting the dump
before its preparation is finished. The function also renames the dump
file before returning so that it does not get overwritten by subsequent
calls; this retains forensic data in case of an unexpected test failure.
(cherry picked from commit ab78e350dd)
Multiple resolvers in the "wildcard" system test are configured with a
single root hint: "ns.root-servers.nil", pointing to 10.53.0.1, which is
inconsistent with authoritative data served by ns1. This may cause
intermittent resolution failures, triggering false positives for the
"wildcard" system test. Prevent this from happening by making ns2, ns3,
and ns5 use root hints corresponding to the contents of ns1/root.db.in.
(cherry picked from commit dd430c3093)
The ns2 named instance in the "staticstub" system test is configured
with a single root hint commonly used in BIND system tests
(a.root-servers.nil with an address of 10.53.0.1), which is inconsistent
with authoritative data served by ns1. This may cause intermittent
resolution failures, triggering false positives for the "staticstub"
system test. Prevent this from happening by making ns1 serve data
corresponding to the contents of bin/tests/system/common/root.hint.
(cherry picked from commit 4b5e1da0e3)
Appending output of a command to the same file as the one that command
is reading from is a dangerous practice. It seems to have accidentally
worked with all the awk implementations we have tested against so far,
but for BusyBox awk, doing this may result in the input/output file
being written to in an infinite loop. Prevent this from happening by
redirect awk output to a temporary file and appending its contents to
the original file in a separate shell pipeline.
(cherry picked from commit bb9c1654e2)
The Net::DNS Perl module needs the Digest::HMAC module to support TSIG.
However, since the latter is not a hard requirement for the former, some
packagers do not make Net::DNS depend on Digest::HMAC. If Net::DNS is
installed on a host but Digest::HMAC is not, the "xfer" system test
breaks in a very hard-to-debug way (ans5 returns TSIG RRs with empty
RDATA, which prevents TSIG-signed SOA queries and transfers from
working). Prevent this from happening by making the "xfer" system test
explicitly require Digest::HMAC apart from Net::DNS.
(cherry picked from commit b10d28d1e0)
The BusyBox version of awk treats some variables which other awk
implementations consider to be decimal values as octal values. This
intermittently breaks key event interval calculations in the "autosign"
system test, trigger false positives for it. Prevent the problem from
happening by stripping leading zeros from the affected awk variables.
(cherry picked from commit ad008f7dbf)
For some libc implementations, BUFSIZ is small enough (e.g. 1024 for
musl libc) to trigger compilation warnings about insufficient size of
certain buffers. Since the relevant buffers are used for printing DNS
names, increase their size to '(n + 1) * DNS_NAME_FORMATSIZE', where 'n'
is the number of DNS names which are printed to a given buffer. This
results in somewhat arbitrary, albeit nicely-aligned and large enough
buffer sizes.
(cherry picked from commit 3384455659)
Including <sys/errno.h> instead of <errno.h> raises a compiler warning
when building against musl libc. Always include <errno.h> instead of
<sys/errno.h> to prevent that compilation warning from being triggered
and to achieve consistency in this regard across the entire source tree.
(cherry picked from commit b5cd146033)
Resolvers in the "filter-aaaa" system test are configured with a single
root hint: "ns.rootservers.net", pointing to 10.53.0.1. However,
querying ns1 for "ns.rootservers.net" results in NXDOMAIN answers.
Since the TTL for the root hint is set to 0, it may happen that a
resolver's ADB will be asked to return any known addresses for
"ns.rootservers.net", but it will only have access to a cached NXDOMAIN
answer for that name and an expired root hint, which will result in a
resolution failure, triggering a false positive for the "filter-aaaa"
system test. Prevent this from happening by making all the root hints
consistent with authoritative data served by ns1.
(cherry picked from commit c19ebde14b)
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4. The change doesn't make the SipHash 2-4 to be the default algorithm, this
is up to the operator.
(cherry picked from commit 196b342bc9)
On DragonFly BSD, use the same commands for configuring network
interfaces used during system tests as on NetBSD and OpenBSD.
(cherry picked from commit 496397eb3f)
Michał Kępień
Mark AndrewsandMichał Kępień
Tinderbox User
Evan Hunt
Ondřej Surý