Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
Previously, the update policy rules check was moved earlier in the
sequence, and the keep rule match pointers were kept to maintain the
ability to verify maximum records by type.
However, these pointers can become invalid if server reloading
or reconfiguration occurs before update completion. To prevent
this issue, extract the maximum records by type value immediately
during processing and only keep the copy of the values instead of the
full ssurule.
the generated grammar for named.conf clauses that may or may not be
enabled at compile time will now print the same comment regardless of
whether or not they are.
previously, the grammar didn't print a comment if an option was enabled,
but printed "not configured" if it was disabled. now, in both cases,
it will say "optional (only available if configured)".
as an incidental fix, clarified the documentation for "named-checkconf -n".
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
The code that listens on individual interfaces is now stable and doesn't
require any changes. The code that would bind to IPv6 wildcard address
and then use IPv6 pktinfo structure to get the source address is not
going to be completed, so it's better to just remove the dead cruft.
In 2024, it is reasonable to assume that IPv4 and IPv6 is always
available on a socket() level. We still keep the option to enable or
disable each IP version individually, as the routing might be broken or
undesirable for one of the versions.
There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
The libisc now includes sizeable chunks of cryptography, but the crypto
log module was missing. Add the new ISC_LOGMODULE_CRYPTO to libisc and
use it in the isc_tls error logging.
This change adds a "none" parameter to the query-source[-v6]
options in named.conf, which forbid the usage of IPv4 or IPv6
addresses when doing upstream queries.
DNS_LOGMODULE_RBTDB was simply inappropriate, and this
log message is actually dependent on db implementation
details, so DNS_LOGMODULE_DB would be the best choice.
The new log message is emitted when adding or updating an RRset
fails due to exceeding the max-records-per-type limit. The log includes
the owner name and type, corresponding zone name, and the limit value.
It will be emitted on loading a zone file, inbound zone transfer
(both AXFR and IXFR), handling a DDNS update, or updating a cache DB.
It's especially helpful in the case of zone transfer, since the
secondary side doesn't have direct access to the offending zone data.
It could also be used for max-types-per-name, but this change
doesn't implement it yet as it's much less likely to happen
in practice.
The 'dns' variable in dohpath can be in various forms ({?dns},
{dns}, {&dns} etc.). To check for a valid dohpath it ends up
being simpler to just parse the URI template rather than looking
for all the various forms if substring.
Add query counters for DoT, DoH, unencrypted DoH and their proxied
counterparts. The protocols don't increment TCP/UDP counters anymore
since they aren't the same as plain DNS-over-53.
The usage of port and tls arguments in *-source and *-source-v6 named
configuration options has been previously removed. Remove
configuration check deprecating usage of those arguments.
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
When canceling the ADB find, the lock on the find gets released for
a brief period of time to be locked again inside adbname lock. During
the brief period that the ADB find is unlocked, it can get canceled by
other means removing it from the adbname list which in turn causes
assertion failure due to a double removal from the adbname list.
Recheck if the find->adbname is still valid after acquiring the lock
again and if not just skip the double removal. Additionally, attach to
the adbname as in the worst case, the adbname might also cease to exist
if the scheduler would block this particular thread for a longer period
of time invalidating the lock we are going to acquire and release.
QPDB is now a default implementation for both cache and zone. Remove
the venerable RBTDB database implementation, so we can fast-track the
changes to the database without having to implement the design changes
to both QPDB and RBTDB and this allows us to be more aggressive when
refactoring the database design.
There is a data race between the statistics channel, which uses
`dns_zone_getxfr()` to get a reference to `zone->xfr`, and the creation
of `zone->xfr`, because the latter happens outside of a zone lock.
Split the `dns_xfrin_create()` function into two parts to separate the
zone tranfer startring part from the zone transfer object creation part.
This allows us to attach the new object to a local variable first, then
attach it to `zone->xfr` under a lock, and only then start the transfer.
Originally, the dns_dbversion_t was typedef'ed to void type. This
allowed some flexibility, but using (void *) just removes any
type-checking that C might have. Instead of using:
typedef void dns_dbversion_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbversion dns_dbversion_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbversion_t type.
Originally, the dns_dbnode_t was typedef'ed to void type. This allowed
some flexibility, but using (void *) just removes any type-checking that
C might have. Instead of using:
typedef void dns_dbnode_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbnode dns_dbnode_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbnode_t type.
The query-source option has the slight quirk of allowing the address to
be specified in two ways, either as every other source option, or as an
"address" key-value pair.
For this reason, it had a separate parsing function from other X-source
options, but it is possible to extend the parsing of other X-sources to
be generic and also handle query-source.
This commit just does that.
The isc/crypto.h now directly includes the OpenSSL headers (evp.h) and
any application that includes that header also needs to have
OPENSSL_CFLAGS in the Makefile.am. Adjust the required automake files
as needed.
Add an option to dnssec-ksr keygen, -o, to create KSKs instead of ZSKs.
This way, we can create a set of KSKS for a given period too.
For KSKs we also need to set timing metadata, including "SyncPublish"
and "SyncDelete". This functionality already exists in keymgr.c so
let's make the function accessible.
Replace dnssec-keygen calls with dnssec-ksr keygen for KSK in the
ksr system test and check keys for created KSKs as well. This requires
a slight modification of the check_keys function to take into account
KSK timings and metadata.
some EDNS option names, including DAU, DHU, N3U, and CHAIN,
were not printed in dns_message_pseudosectiontotext() or
_psuedosectiontoyaml(); they were displayed as unknown options.
this has been corrected.
that code was also refactored to use switch instead of if/else,
and to look up the option code names in a table to prevent
inconsistencies between the two formats. one such inconsistency
was corrected: the "TCP-KEEPALIVE" option is now always printed
with a hyphen, instead of being "TCP KEEPALIVE" when not using
YAML. the keepalive system test has been updated to expect this.
EDNS options that print DNS names (i.e., CHAIN and Report-Channel)
now enclose them in quotation marks to ensure YAML correctness.
the auth system test has been updated to expect this when grepping
for Report-Channel options.
Dispatch needs to know the transport that is being used over the
TCP connection to correctly allow for it to be reused. Add a
transport parameter to dns_dispatch_createtcp and dns_dispatch_gettcp
and use it when selecting a TCP socket for reuse.
RFC 9567 section 8.1 specifies that the agent domain cannot
be a subdomain of the domain it is reporting on. therefore,
in addition to making it illegal to configure that at the
zone level, we also need to disable send-report-channel for
any zone for which the global send-report-channel value is
a subdomain.
we also now warn if send-report-channel is configured
globally to a zone that we host, but that zone doesn't
have log-report-channel set.
