FreeBSD 13.0 replaced GNU grep with BSD grep and removed support for
"redundant escapes for most ordinary characters" from regex(3) library,
therefore the matching sequence in digdelv/tests.sh needs to be
rewritten otherwise it fails with:
grep: trailing backslash (\)
(cherry picked from commit 253ae96bf1)
When the `named` would hang on startup it would be killed with SIGKILL
leaving us with no information about the state the process was in.
This commit changes the start.pl script to send SIGABRT instead, so we
can properly collect and process the coredump from the hung named
process.
(cherry picked from commit 861a236937)
The nsupdate system test did not record failures from the
'update_test.pl' Perl script. This was because the 'ret' value was
not being saved outside the '{ $PERL ... || ret=1 } cat_i' scope.
Change this piece to store the output in a separate file and then
cat its contents. Now the 'ret' value is being saved.
Also record failures in 'update_test.pl' if sending the update
failed.
Add missing 'n' incrementals to 'nsupdate/test.sh' to keep track of
test numbers.
(cherry picked from commit 5b31811b5f)
* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
(cherry picked from commit 8510ccaa54)
When answering a query, named should never attempt to add the same RRset
to the ANSWER section more than once. However, such a situation may
arise when chasing DNAME records: one of the DNAME records placed in the
ANSWER section may turn out to be the final answer to a client query,
but there is no way to know that in advance. Tweak the relevant INSIST
assertion in query_find() so that it handles this case properly. The
rdataset is freed later anyway, so there is no need to clean it up
immediately.
If "tkey-gssapi-credential" is set in the configuration and GSSAPI
support is not available, named will refuse to start. As the test
system framework does not support starting named instances
conditionally, ensure that "tkey-gssapi-credential" is only present in
named.conf if GSSAPI support is available.
(cherry picked from commit 6feac68b50)
Four named instances in the "nsupdate" system test have GSS-TSIG support
enabled. All of them currently use "tkey-gssapi-keytab". Configure two
of them with "tkey-gssapi-credential" to test that option.
As "tkey-gssapi-keytab" and "tkey-gssapi-credential" both provide the
same functionality, no test modifications are required. The difference
between the two options is that the value of "tkey-gssapi-keytab" is an
explicit path to the keytab file to acquire credentials from, while the
value of "tkey-gssapi-credential" is the name of the principal whose
credentials should be used; those credentials are looked up in the
keytab file expected by the Kerberos library, i.e. /etc/krb5.keytab by
default. The path to the default keytab file can be overridden using by
setting the KRB5_KTNAME environment variable. Utilize that variable to
use existing keytab files with the "tkey-gssapi-credential" option.
The KRB5_KTNAME environment variable should not interfere with the
"tkey-gssapi-keytab" option. Nevertheless, rename one of the keytab
files used with "tkey-gssapi-keytab" to something else than the contents
of the KRB5_KTNAME environment variable in order to make sure that both
"tkey-gssapi-keytab" and "tkey-gssapi-credential" are actually tested.
(cherry picked from commit 1746d2e84a)
When the authsock.pl script would be terminated with a signal,
it would leave the pidfile around. This commit adds a signal
handler that cleanups the pidfile on signals that are expected.
The DNS Flag Day 2020 reduced all the EDNS buffer sizes to 1232. In
this commit, we revert the default value for nocookie-udp-size back to
4096 because the option is too obscure and most people don't realize
that they also need to change this configuration option in addition to
max-udp-size.
(cherry picked from commit 79c196fc77)
Since the queries sent towards root and TLD servers are now included in
the count (as a result of the fix for CVE-2020-8616),
"max-recursion-queries" has a higher chance of being exceeded by
non-attack queries. Increase its default value from 75 to 100.
(cherry picked from commit ab0bf49203)
Every DocBook source document can be namespaced (DocBook 5) or
non-namespaced (DocBook 4). The set of XSL stylesheets used for
producing an output document can also be namespaced or non-namespaced.
Namespaced source documents should be used with namespaced stylesheets
and non-namespaced source documents should be used with non-namespaced
stylesheets. However, both stylesheet flavors contain processing rules
which allow them to be used interchangeably for any type of source
document.
Unfortunately, these processing rules became broken in version 1.79.1 of
the stylesheets, which means that non-namespaced source documents can no
longer be correctly transformed into man pages using namespaced
stylesheets and vice versa. This problem was fixed upstream [1], but no
released version of the XSL stylesheets contains that fix yet.
Back in 2016, this problem was reported as RT #43831 and allegedly fixed
in commit 1b8ce3b330. However, that fix
only helped for the non-namespaced version of the stylesheets - while
also breaking man page generation for the namespaced flavor.
Since using namespaced DocBook sources is the current best practice
(DocBook 5), make BIND DocBook sources namespaced again. When using
version 1.79.1 or 1.79.2 of the XSL stylesheets, care must be taken to
ensure namespaced stylesheets are used for generating BIND
documentation.
[1] https://github.com/docbook/xslt10-stylesheets/issues/109
The traceback files could overwrite each other on systems which do not
use different core dump file names for different processes. Prevent
that by writing the traceback file to the same directory as the core
dump file.
These changes still do not prevent the operating system from overwriting
a core dump file if the same binary crashes multiple times in the same
directory and core dump files are named identically for different
processes.
(cherry picked from commit 6428fc26af)
ans10 simulates a local anycast server which has both signed and
unsigned instances of a zone. 'A' queries get answered from the
signed instance. Everything else gets answered from the unsigned
instance. The resulting answer should be insecure.
(cherry picked from commit d7840f4b93)
"tcp-only" was not being tested correctly in the RPZ system test
because the option to the "digcmd" function that causes queries to
be sent via TCP was misspelled in one case, and was being interpreted
as a query name.
the "ckresult" function has also been changed to be case sensitive
for consistency with "digcmd".
(cherry picked from commit 78af071c11)
On Linux core dump contains absolute path to crashed binary
Core was generated by `/home/newman/isc/ws/bind9/bin/named/.libs/lt-named -D glue-ns1 -X named.lock -m'.
However, on OpenBSD there's only a basename
Core was generated by `named'.
This commit adds support for the latter, retains the former.
(cherry picked from commit f0b13873a3)
(cherry picked from commit 659feff963)
This test is very simple, two nameserver instances are created:
- ns4: master, with 'minimal-responses yes', authoritative
for example. zone
- ns5: slave, stub zone
The first thing verified is the transfer of zone data from master
to slave, which should be saved in ns5/example.db.
After that, a query is issued to ns5 asking for target.example.
TXT, a record present in the master database with the "test" string
as content.
If that query works, it means stub zone successfully request
nameserver addresses from master, ns4.example. A/AAAA
The presence of both A/AAAA records for ns4 is also verified in the
stub zone local file, ns5/example.db.
This commit ensures that dnstap output files captured
by fstrm_capture are properly flushed before any attempt
on reading them with dnstap-read is done.
By reading fstrm-capture source code it was noticed that
signal SIGHUP is used to flush the capture file.
Add a +burst option to mdig so that we have a second to setup the
mdig calls then they run at the start of the next second.
RRL uses 'queries in a second' as a approximation to
'queries per second'. Getting the bursts of traffic to all happen in
the same second should prevent false negatives in the system test.
We now have a second to setup the traffic in. Then the traffic should
be sent at the start of the next second. If that still fails we
should move to +burst=<now+2> (further extend mdig) instead of the
implicit <now+1> as the trigger second.
(cherry picked from commit 92cdc7b6c7)
Michal Nowak
Ondřej SurýandMichal Nowak
Matthijs Mekking
Mark AndrewsandMatthijs Mekking
Petr Špaček
Tinderbox UserandMichał Kępień
Havard EidnesandMichal Nowak
Diego Fronza