- added tests to the dnssec system test that duplicate the ones
from bin/tests/dnssec-signzone
- changed cleanall.sh so it doesn't automatically remove all
key files, because there are now some of those that are part of the
distribution
(cherry picked from commit ccfe778c01)
Given the characteristics of the three timestamps involved in file
modification time checks in the cds system test (each one is an hour
apart from the next), reduce the resolution of these checks to 1 minute.
This will prevent intermittent false negatives caused by exceeding the
currently allowed difference of 9 seconds between file modification
times without making the test moot.
Also note that by using abs(), checkmtime.pl allows the cds system test
to pass when the modification time of the checked file is less than an
hour (or two hours for the second check) in the past. This should never
happen, so remove abs() from the condition checked by checkmtime.pl.
(cherry picked from commit ab2913a29f)
Calling nextpart() after reconfiguring ns1 is not safe, because the
expected log message may appear in ns5/named.run before nextpart() is
run. With the TTL for ./DNSKEY set to 20 seconds, ns5 will refresh it
after 10 seconds, by which time wait_for_log() will already have failed.
This results in a false negative.
However, just calling nextpart() before reconfiguring ns1 would
introduce a different problem: if ns5 refreshed ./DNSKEY between these
two steps, the subsequent wait_for_log() call would return immediately
as it would come across the log message about a failure while refreshing
./DNSKEY instead of the expected success. This in turn would result in
a different false negative as the root key would still be uninitialized
by the time "rndc secroots" is called.
Prevent both kinds of false negatives by:
- calling nextpart() before reconfiguring ns1, in order to prevent the
first case described above,
- looking for a more specific log message, in order to prevent the
second case described above.
Also look for a more specific log message in the first part of the
relevant check, not to fix any problem, but just to emphasize that a
different fetch result is expected in that case.
With these tweaks in place, if a (failed) ./DNSKEY refresh is scheduled
between nextpart() and reconfiguring ns1, wait_for_log() will just wait
for two more seconds (one "hour"), at which point another refresh
attempt will be made that will succeed.
(cherry picked from commit 012ca0a27d)
- wait for the transfer completion message to apear in the log instead
of the notify message. this ensures we don't check for the presense of
transfered records during the time between the notify and the
transfer.
- don't bail out of the loop if clients are exceeded, just count incidents
- verbosely describe expectations and results
(cherry picked from commit 86838b2a02)
Print a list of failed system tests, if any, below the system test
summary to avoid the need to manually search through the test log.
(cherry picked from commit 28068857e7)
The current regular expression used for extracting system test results
from systests.output, "^R:", is anchored at the start of a line, which
prevents colored system test output from being properly processed. As
just "R:" would arguably be too general, extend the pattern a bit to
ensure it will only match lines containing system test results.
(cherry picked from commit 9006d6dbbd)
- removed a few remaing places where output wasn't being passed
through echo_i or cat_i
- added a "digcomp" function to conf.sh.in to send digcomp.pl output
through cat_i and return the correct exit value
- set SYSTESTDIR when calling echo_i from nsX directories, so that
the test name will always be printed correctly
- fixed a test name typo in conf.sh.in
(cherry picked from commit 0e52fbd0b3)
The check_mx() function in lib/ns/update.c incorrectly tests whether the
DNS_RDATA_CHECKMX/DNS_RDATA_CHECKMXFAIL flags are set for each applied
MX record update as these flags are never set in code paths related to
dynamic updates; they can only be set when loading a zone from a master
file (DNS_ZONEOPT_CHECKMX -> DNS_MASTER_CHECKMX -> DNS_RDATA_CHECKMX).
This flaw allows MX records containing IP addresses to be added to a
zone even when "check-mx fail;" is used.
Ensure correct behavior by modifying the relevant tests in check_mx() so
that they use DNS_ZONEOPT_CHECKMX/DNS_ZONEOPT_CHECKMXFAIL instead.
(cherry picked from commit 857a40c87b)
Prevent runall.sh and "make test" from even attempting to run system
tests when "ifconfig.sh up" has not been run beforehand. This ensures
the user is not flooded with error messages in such a case.
(cherry picked from commit e0221f2d25)
This enables the environment variables controlling run.sh behavior to be
permanently set in a working environment (e.g. to automatically force
colored output without using "-c" in each runall.sh invocation).
Relevant runall.sh command line arguments still have a higher priority.
(cherry picked from commit d989d20fe5)
As parallel.mk and runsequential.sh both pipe system test output through
"tee" (for the purpose of creating test.output), run.sh invoked from
these two files detects it is not writing to a terminal, which prevents
colored output from being generated. Allow forcing colored output using
a new command line argument for runall.sh, "-c", which sets an
environment variable (SYSTEMTEST_FORCE_COLOR) causing conf.sh to
unconditionally enable colored output.
The same environment variable can also be used directly to force colored
output when using "make test" instead of runall.sh.
(cherry picked from commit a324031a82)
Instead of exporting an environment variable containing a command line
argument (NOCLEAN="-n"), extend run.sh to handle a "boolean" environment
variable (SYSTEMTEST_NO_CLEAN) itself. The former method is buggy
because the value of NOCLEAN is set in parallel.mk when that file is
first created, but it is not subsequently updated upon each test run
(because make considers parallel.mk to be up to date).
To retain backward compatibility, the "-n" command line argument for
run.sh is still supported (and has a higher priority than the relevant
environment variable).
The SYSTEMTEST_NO_CLEAN environment variable can also be used directly
to prevent cleanup when using "make test" instead of runall.sh.
Apart from fixing a bug, this simplifies the way runall.sh controls
run.sh behavior due to the Makefile being bypassed. Direct processing
of environment variables in run.sh is more scalable in the long run,
given that the previously utilized technique, even with its
implementation fixed, would still require Makefile.in to be modified in
two places each time a new flag needed to be passed from runall.sh to
run.sh.
(cherry picked from commit 3862043879)
- no longer grep for specific line numbers when checking
parameter logging, as those can change
- report the failure immediatey if parameter check fails
(cherry picked from commit 749df056be)
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
(cherry picked from commit 0c559199bf)
- this was a test for the allow-v6-synthesis option, which was
deprecated and no longer works. the test was removed
from conf.sh.in long ago.
(cherry picked from commit 474b10a133)
Prevent rpz system test from wiping out forensic data
See merge request isc-projects/bind9!51
(cherry picked from commit 14388a4ad6)
034450ba add test numbers as use them in file names
05f9deba use symbolic test modes native/dnsrps
b98a9207 perform rpz testing with a loop rather that recursion
f7172cf2 add CHANGES note
Resolve "cacheclean test is not robust."
Closes#82
See merge request isc-projects/bind9!50
(cherry picked from commit aa7964dd4b)
146c16c0 check that sed selects a non zero range of lines
8c8ad74a add CHANGES entry
1. Track changes to conf.sh.in in conf.sh.win32
2. Modifications to prevent Windows "Configure" script replacing
the sed "@PORT@" substitution tokens in conf.sh.win32.
3. runall.sh now runs Windows tests sequentially
(cherry picked from commit 7bb9a97904)
It was TESTNAME, but this is an obvious name and was used in one of
the system tests, something that interfered with the content of
progress messages. It is now SYSTESTDIR.
(cherry picked from commit 30cd931a0d)
