The reference counting and isc_timer_attach()/isc_timer_detach()
semantic are actually misleading because it cannot be used under normal
conditions. The usual conditions under which is timer used uses the
object where timer is used as argument to the "timer" itself. This
means that when the caller is using `isc_timer_detach()` it needs the
timer to stop and the isc_timer_detach() does that only if this would be
the last reference. Unfortunately, this also means that if the timer is
attached elsewhere and the timer is fired it will most likely be
use-after-free, because the object used in the timer no longer exists.
Remove the reference counting from the isc_timer unit, remove
isc_timer_attach() function and rename isc_timer_detach() to
isc_timer_destroy() to better reflect how the API needs to be used.
The only caveat is that the already executed event must be destroyed
before the isc_timer_destroy() is called because the timer is no longet
attached to .ev_destroy_arg.
(cherry picked from commit ae01ec2823)
When we change the view in the view->managed_keys, we never commit the
change, keeping the previous view possibly attached forever.
Call the dns_zone_setviewcommit() immediately after changing the view as
we are detaching the previous view anyway and there's no way to recover
from that.
(cherry picked from commit 7e8b53720d)
limit the number of simultaneous DNS UPDATE events that can be
processed by adding a quota for update and update forwarding.
this quota currently, arbitrarily, defaults to 100.
also add a statistics counter to record when the update quota
has been exceeded.
(cherry picked from commit 7c47254a14)
[bug] Changes to the RPZ response-policy min-update-interval
and add-soa options now take effect as expected when
named is reconfigured. [GL #3740]
(cherry picked from commit d8a3d328db)
There were a number of places where the zone table should have been
locked, but wasn't, when dns_zt_apply was called.
Added a isc_rwlocktype_t type parameter to dns_zt_apply and adjusted
all calls to using it. Removed locks in callers.
(cherry picked from commit f053d5b414)
If after a reconfig a zone is not reusable because inline-signing
was turned on/off, trigger a full resign. This is necessary because
otherwise the zone maintenance may decide to only apply the changes
in the journal, leaving the zone in an inconsistent DNSSEC state.
(cherry picked from commit 4d143f2cc4)
The "prefetch" setting is in "defaultconf" so it cannot fail, use
INSIST to confirm that.
The 'trigger' and 'eligible' variables are now prefixed with
'prefetch_' and their declaration moved to an upper level, because
there is no more additional code block after this change.
(cherry picked from commit 0227565cf1)
This commit fixes a startup issue on Solaris systems with
many (reportedly > 510) CPUs by bumping RLIMIT_NOFILE. This appears to
be a regression from 9.11.
(cherry picked from commit fff01fe7eb)
Since the advent of netmgr, named no longer creates a single thread per
CPU, but rather a set of two threads per CPU. Update the man page for
named accordingly to prevent confusion.
There was a ubsan error reporting an invalid value for interface_auto
(a boolean value cannot be 190) because it was not initialized. To
avoid this problem happening again, ensure the whole of the server
structure is initialized to zero before setting the (relatively few)
non-zero elements.
The usage of xmlInitThreads() and xmlCleanupThreads() functions in
libxml2 is now marked as deprecated, and these functions will be made
private in the future.
Use xmlInitParser() and xmlCleanupParser() instead of them.
(cherry picked from commit a5d412d924)
Reject loading of zones with TTL higher than the max-zone-ttl
from the dnssec-policy.
With this change, any zone with a dnssec-policy in use will ignore
the max-zone-ttl option in zone/view/options.
The BUFSIZ value varies between platforms, it could be 8K on Linux and
512 bytes on mingw. Make sure the buffers are always big enough for the
output data to prevent truncation of the output by appropriately
enlarging or sizing the buffers.
(cherry picked from commit b19d932262)
The usage instructions printed by "named -h" are missing the "external"
and "internal" flags that can be passed to the -M command-line option.
Add the missing flags to "named -h" output.
Add "internal" to the list of legal values for the -M command-line
option (commit 1f7d2d53f0 added that
flag).
Make the style of the relevant paragraph more in line with the next one
and split its contents up into an unordered list of options for improved
readability.
(cherry picked from commit f0c31ceb3b)
Contrary to what the documentation states, memory filling is only
enabled by --enable-developer (or by setting -DISC_MEM_DEFAULTFILL=1) if
the internal memory allocator is used. However, the internal memory
allocator is disabled by default, so just using the --enable-developer
build-time option does not enable memory filling (passing "-M fill" on
the named command line is necessary to actually enable it). As memory
filling is a useful tool for troubleshooting certain types of bugs, it
should also be enabled by --enable-developer when the system allocator
is used.
Furthermore, memory-related preprocessor macros are handled in two
distinct locations: lib/isc/include/isc/mem.h and bin/named/main.c.
This makes the logic hard to follow.
Move all code handling the ISC_MEM_DEFAULTFILL preprocessor macro to
lib/isc/include/isc/mem.h, ensuring memory filling is enabled by the
--enable-developer build-time switch, no matter which memory allocator
is used.
When dnssec-policy is used, and the zone is not dynamic, BIND will
assume that the zone is inline-signed. But the function responsible
for this did not inherit the dnssec-policy option from the view or
options level, and thus never enabled inline-signing, while the zone
should have been.
This is fixed by this commit.
(cherry picked from commit 576b21b168)
The current implementation of isc_queue uses Michael-Scott lock-free
queue that in turn uses hazard pointers. It was discovered that the way
we use the isc_queue, such complicated mechanism isn't really needed,
because most of the time, we either execute the work directly when on
nmthread (in case of UDP) or schedule the work from the matching
nmthreads.
Replace the current implementation of the isc_queue with a simple locked
ISC_LIST. There's a slight improvement - since copying the whole list
is very lightweight - we move the queue into a new list before we start
the processing and locking just for moving the queue and not for every
single item on the list.
NOTE: There's a room for future improvements - since we don't guarantee
the order in which the netievents are processed, we could have two lists
- one unlocked that would be used when scheduling the work from the
matching thread and one locked that would be used from non-matching
thread.
(cherry picked from commit 6bd025942c)
The named_config_getdefault() was missing void in the function
definition. This broke clang-15 that didn't match the declaration that
had the void in the argument with the definition that hadn't.
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
(cherry picked from commit cf722d18b3)
Parser ensures new-zones-directory has qstring parameter before it can
reach this place. dir == NULL then should never happen on any
configuration. Replace silent check with insist.
(cherry picked from commit 0a7d04367a)
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
(cherry picked from commit 7e71c4d0cc)
Previously, HAVE_SO_REUSEPORT_LB has been defined only in the private
netmgr-int.h header file, making the configuration of load balanced
sockets inoperable.
Move the missing HAVE_SO_REUSEPORT_LB define the isc/netmgr.h and add
missing isc_nm_getloadbalancesockets() implementation.
(cherry picked from commit 142c63dda8)
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
(cherry picked from commit 85c6e797aa)
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
(cherry picked from commit 20f0936cf2)
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
(cherry picked from commit 584f0d7a7e)
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
(cherry picked from commit fe7ce629f4)
Previously, the function(s) in the commit subject could fail for various
reasons - mostly allocation failures, or other functions returning
different return code than ISC_R_SUCCESS. Now, the aforementioned
function(s) cannot ever fail and they would always return ISC_R_SUCCESS.
Change the function(s) to return void and remove the extra checks in
the code that uses them.
(cherry picked from commit d128656d2e)
If a view configuration error occurs during a named reconfiguration
procedure, BIND can end up having twin views (old and new), with some
zones and internal structures attached to the old one, and others
attached to the new one, which essentially creates chaos.
Implement some additional view reverting mechanisms to avoid the
situation described above:
1. Revert rpz configuration.
2. Revert catz configuration.
3. Revert zones to view attachments.
(cherry picked from commit 3697560f04)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
(cherry picked from commit 58bd26b6cf)
If a catz event is scheduled while the task manager was being
shut down, task-exclusive mode is unavailable. This needs to be
handled as an error rather than triggering an assertion.
(cherry picked from commit 973ac1d891)
For small sized allocations, the internal allocator gets the memory in
bigger blobs that gets splits into right-sized chunks. This increases
speed of small allocations and reduced the fragmentation, but such
memory is never released back to the operating system.
Disable the internal allocator by default, and add new `-M internal`
command line option to `named`.
The following scenario triggers a "named" crash:
1. Configure a catalog zone.
2. Start "named".
3. Comment out the "catalog-zone" clause.
4. Run `rndc reconfig`.
5. Uncomment the "catalog-zone" clause.
6. Run `rndc reconfig` again.
Implement the required cleanup of the in-memory catalog zone during
the first `rndc reconfig`, so that the second `rndc reconfig` could
find it in an expected state.
(cherry picked from commit 43ac2cd229)
Michał Kępień
Ondřej Surý
Evan HuntandMichał Kępień
Tony FinchandTony Finch
Michal Nowak
Mark Andrews
Matthijs Mekking
Aram Sargsyan
Artem Boldariev
Petr ŠpačekandMark Andrews
Petr MenšíkandPetr Špaček
Ondřej SurýandOndřej Surý