The mkeys system test could fail because root zone was resigned
within the same second as it was previously signed causing reloads
to fail. Add delays to the test to prevent this.
(cherry picked from commit 40e3529379)
The $t1 value equals $t2 due to the time elapsed between "rndc
managed-keys status" calls being equal to the normal active refresh
period (as calculated per rules listed in RFC 5011 section 2.3) minus an
"hour" (as set using -T mkeytimers). This value equality is expected to
happen on really slow machines. On our Windows CI runner, it happens
very often.
This adds an island of trust that is reachable from the root
where the trust anchors are added to island.conf.
This add an island of trust that is not reachable from the root
where the trust anchors are added to private.conf.
(cherry picked from commit 41bdb5b9fe)
Following deleting the root trust anchor and reconfiguring the
server it takes some time to for trust anchor to appear in 'rndc
managed-keys status' output. Retry several times.
(cherry picked from commit 71dbd09796)
Use the ALGORITHM_SET option to use randomly selected default algorithm
in this test. Make sure the test works by using variables instead of
hard-coding values.
(cherry picked from commit f65f276f98)
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
(cherry picked from commit c100308b7d)
Use the ALGORITHM_SET option to use randomly selected default algorithm
in this test. Make sure the test works by using variables instead of
hard-coding values.
(cherry picked from commit f65f276f98)
Stop using a RSASHA1 fixed key in ns3's named.conf as the
trusted key and instead compute a broken digest from the
real digest to use in trusted-keys.
(cherry picked from commit be4cbe2b80)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
(cherry picked from commit 58bd26b6cf)
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
(cherry picked from commit e43b3c1fa1)
The mkeys system test started to fail after introducing support for
zones transitioning to unsigned without going bogus. This is because
there was actually a bug in the code: if you reconfigure a zone and
remove the "auto-dnssec" option, the zone is actually still DNSSEC
maintained. This is because in zoneconf.c there is no call
to 'dns_zone_setkeyopt()' if the configuration option is not used
(cfg_map_get(zoptions, "auto-dnssec", &obj) will return an error).
The mkeys system test implicitly relied on this bug: initially the
root zone is being DNSSEC maintained, then at some point it needs to
reset the root zone in order to prepare for some tests with bad
signatures. Because it needs to inject a bad signature, 'auto-dnssec'
is removed from the configuration.
The test pass but for the wrong reasons:
I:mkeys:reset the root server
I:mkeys:reinitialize trust anchors
I:mkeys:check positive validation (18)
The 'check positive validation' test works because the zone is still
DNSSEC maintained: The DNSSEC records in the signed root zone file on
disk are being ignored.
After fixing the bug/introducing graceful transition to insecure,
the root zone is no longer DNSSEC maintained after the reconfig.
The zone now explicitly needs to be reloaded because otherwise the
'check positive validation' test works against an old version of the
zone (the one with all the revoked keys), and the test will obviously
fail.
(cherry picked from commit 2fc42b598b)
In order to lower the amount of memory allocated at startup by named
instances used in the BIND system test suite, set the default value of
"max-cache-size" for these to 2 megabytes. The purpose of this change
is to prevent named instances (or even entire virtual machines) from
getting killed by the operating system on the test host due to excessive
memory use.
Remove all "max-cache-size" statements from named configuration files
used in system tests ("checkconf" notwithstanding) to prevent confusion
as the "-T maxcachesize=..." command line option takes precedence over
configuration files.
(cherry picked from commit dad6572093)
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
this adds functions in conf.sh.common to create DS-style trust anchor
files. those functions are then used to create nearly all of the trust
anchors in the system tests.
there are a few exceptions:
- some tests in dnssec and mkeys rely on detection of unsupported
algorithms, which only works with key-style trust anchors, so those
are used for those tests in particular.
- the mirror test had a problem with the use of a CSK without a
SEP bit, which still needs addressing
in the future, some of these tests should be changed back to using
traditional trust anchors, so that both types will be exercised going
forward.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
- managed-keys is now deprecated as well as trusted-keys, though
it continues to work as a synonym for dnssec-keys
- references to managed-keys have been updated throughout the code.
- tests have been updated to use dnssec-keys format
- also the trusted-keys entries have been removed from the generated
bind.keys.h file and are no longer generated by bindkeys.pl.
- trusted-keys is now flagged as deprecated, but still works
- managed-keys can be used to configure permanent trust anchors by
using the "static-key" keyword in place of "initial-key"
- parser now uses an enum for static-key and initial-key keywords
Some values returned by dstkey_fromconfig() indicate that key loading
should be interrupted, others do not. There are also certain subsequent
checks to be made after parsing a key from configuration and the results
of these checks also affect the key loading process. All of this
complicates the key loading logic.
In order to make the relevant parts of the code easier to follow, reduce
the body of the inner for loop in load_view_keys() to a single call to a
new function, process_key(). Move dstkey_fromconfig() error handling to
process_key() as well and add comments to clearly describe the effects
of various key loading errors.
The "check key refreshes are resumed after root servers become
available" check may trigger a false positive for the "mkeys" system
test if the second example/TXT query sent by dig is received by ns5 less
than a second after it receives a REFUSED response to the upstream query
it sends to ns1 in order to resolve the first example/TXT query sent by
dig. Since that REFUSED response from ns1 causes ns5 to return a
SERVFAIL answer to dig, example/TXT is added to the SERVFAIL cache,
which is enabled by default with a TTL of 1 second. This in turn may
cause ns5 to return a cached SERVFAIL response to the second example/TXT
query sent by dig, i.e. make ns5 not perform full query processing as
expected by the check.
Since the primary purpose of the check in question is to ensure that key
refreshes are resumed once initially unavailable root servers become
available, the optimal solution appears to be disabling SERVFAIL cache
for ns5 as doing that still allows the check to fulfill its purpose and
it is arguably more prudent than always sleeping for 1 second.
These tests check if a key with an unsupported algorithm in
managed-keys is ignored and when seeing an algorithm rollover to
an unsupported algorithm, the new key will be ignored too.
The keyfile and key ID for the original managed key do not change
throughout the mkeys system test. Keep them in helper variables to
prevent calling "cat" multiple times and improve code readability.
Reduce code duplication by replacing a code snippet repeated throughout
system tests using "trusted-keys" and/or "managed-keys" configuration
sections with calls to keyfile_to_{managed,trusted}_keys() helper
functions.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.