This commit adds PROXYv2 support into dig by the means of adding
+[no]proxy and +[no]proxy-plain options. Since this commit dig
supports sending PROXYv2 headers on all supported DNS-transports.
The support for PROXYv2 is modelled after that one in kdig.
When all the servers are exhausted for UDP setup emit "no servers
could be reached" in udp_ready(). This message can also be emitted
for a recv_done() error and for TCP connection failure similarly.
Instead of creating new memory pools for each new dns_message, change
dns_message_create() method to optionally accept externally created
dns_fixedname_t and dns_rdataset_t memory pools. This allows us to
preallocate the memory pools in ns_client and dns_resolver units for the
lifetime of dns_resolver_t and ns_clientmgr_t.
the prior practice of passing a dns_name containing the
expanded name of an algorithm to dns_tsigkey_create() and
dns_tsigkey_createfromkey() is unnecessarily cumbersome;
we can now pass the algorithm number instead.
- remove the 'ring' parameter from dns_tsigkey_createfromkey(),
and use dns_tsigkeyring_add() to add key objects to a keyring instead.
- add a magic number to dns_tsigkeyring_t
- change dns_tsigkeyring_dumpanddetach() to dns_tsigkeyring_dump();
we now call dns_tsigkeyring_detach() separately.
- remove 'maxgenerated' from dns_tsigkeyring_t since it never changes.
- style cleanups.
- simplify the function parameters to dns_tsigkey_create():
+ remove 'restored' and 'generated', they're only ever set to false.
+ remove 'creator' because it's only ever set to NULL.
+ remove 'inception' and 'expiry' because they're only ever set to
(0, 0) or (now, now), and either way, this means "never expire".
+ remove 'ring' because we can just use dns_tsigkeyring_add() instead.
- rename dns_keyring_restore() to dns_tsigkeyring_restore() to match the
rest of the functions operating on dns_tsigkeyring objects.
The check_if_done() function can pass control back out to
dighost_shutdown() (which is part of dig.c, host.c, or nslookup.c),
and calling that twice can cause unexpected problems, if it is not
designed to be idempotent.
Since cancel_lookup() calls check_if_done() implicitly, don't call
check_if_done() again when 'next' is NULL.
When fatal is called we may be holding memory allocated by OpenSSL.
This may result in the reference count for the FIPS provider not
going to zero and the shared library not being unloaded during
OPENSSL_cleanup. When the shared library is ultimately unloaded,
when all remaining dynamically loaded libraries are freed, we have
already destroyed the memory context we where using to track memory
leaks / late frees resulting in INSIST being called.
Disable triggering the INSIST when fatal has being called.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
When the loopmanager is shutting down following a signal,
`dig` and `host` should stop cleanly. Before this commit
they were oblivious to ISC_R_SHUTTINGDOWN.
The `isc_signal` callbacks now report this kind of mistake
with a stack backtrace.
stop and restart the server in the 'tsiggss' test, in order
to confirm that GSS negotiated TSIG keys are saved and restored
when named loads.
added logging to dns_tsigkey_createfromkey() to indicate whether
a key has been statically configured, generated via GSS negotiation,
or restored from a file.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
Free/detach tsigkey and sig0key when exiting and then call
dst_lib_destroy if we have previously called dst_lib_init. This will,
in theory, allow OPENSSL_cleanup to free all memory.
* rbt node chains were sized to allow for bitstring labels, so they
had 256 levels; but in the absence of bistrings, 128 is enough.
* dns_byaddr_createptrname() had a redundant options argument,
and a very outdated doc comment.
* A number of comments referred to bitstring labels in a way that is
no longer helpful. (A few informative comments remain.)
Return 'isc_result_t' type value instead of 'bool' to indicate
the actual failure. Rename the function to something not suggesting
a boolean type result. Make changes in the places where the API
function is being used to check for the result code instead of
a boolean value.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
Additionally to renaming, it changes the function definition so that
it accepts a pointer to pointer instead of returning a pointer to the
new object.
It is mostly done to make it in line with other functions in the
module.
All we need for compression is a very small hash set of compression
offsets, because most of the information we need (the previously added
names) can be found in the message using the compression offsets.
This change combines dns_compress_find() and dns_compress_add() into
one function dns_compress_name() that both finds any existing suffix,
and adds any new prefix to the table. The old split led to performance
problems caused by duplicate names in the compression context.
Compression contexts are now either small or large, which the caller
chooses depending on the expected size of the message. There is no
dynamic resizing.
There is a behaviour change: compression now acts on all the labels in
each name, instead of just the last few.
A small benchmark suggests this is about 2x faster.
In several places, the structures were cleaned with memset(...)) and
thus the semantic patch converted the isc_mem_get(...) to
isc_mem_getx(..., ISC_MEM_ZERO). Use the designated initializer to
initialized the structures instead of zeroing the memory with
ISC_MEM_ZERO flag as this better matches the intended purpose.
Add new semantic patch to replace the straightfoward uses of:
ptr = isc_mem_{get,allocate}(..., size);
memset(ptr, 0, size);
with the new API call:
ptr = isc_mem_{get,allocate}x(..., size, ISC_MEM_ZERO);
There's a known memory leak in the engine_pkcs11 at the time of writing
this and it interferes with the named ability to check for memory leaks
in the OpenSSL memory context by default.
Add an autoconf option to explicitly enable the memory leak detection,
and use it in the CI except for pkcs11 enabled builds. When this gets
fixed in the engine_pkc11, the option can be enabled by default.
As we can't check the deallocations done in the library memory contexts
by default because it would always fail on non-clean exit (that happens
on error or by calling exit() early), we just want to enable the checks
to be done on normal exit.
If there are any problems with IDN processing, DiG will now quietly
handle the name as if IDN were disabled. This means that international
query names are rendered verbatim on the wire, and ACE names are
printed raw without conversion to UTF8.
If you want to check the syntax of international domain names,
use the `idn2` utility.
In several cases where IDNA2008 mappings do not exist whereas IDNA2003
mappings do, dig was failing to process the suplied domain name. Take a
backwards compatible approach, and convert the domain to IDNA2008 form,
and if that fails try the IDNA2003 conversion.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
Clean up dns_rdatalist_tordataset() and dns_rdatalist_fromrdataset()
functions by making them return void, because they cannot fail.
Clean up other functions that subsequently cannot fail.
When DiG finishes its work with a lookup (due to success or error), it
calls the clear_current_lookup() function, which decreases the lookup's
reference count. That decrease action is the counterpart of the initial
creation of the reference counter, so this function was designed in such
a way that it should decrease the reference count only once, when there
are no more active queries in the lookup.
The way it checks whether there are any active queries is by looking
at the queries list of the lookup object - if it's NULL then there are
no active queries. But that is not always true - the cancel_lookup()
function, when canceling the queries one by one, also removes them
from the lookup's list, but in NSSEARCH mode, when the queries are
working in parallel, some of those queries can be still active. And
when their recv_done() callback gets called, it sees that the lookup
has been canceled, calls clear_current_lookup(), which decreases the
reference count every time for each query that was still active
(because ISC_LIST_HEAD(lookup->q) is NULL) and results in a reference
counting error.
Fix the issue by introducing a new "cleared" property for the lookup,
which will ensure that the clear_current_lookup() function does its
job only once per lookup.
In the NSSEARCH followup lookup, when one of the queries fails to be
set up (UDP) or connected (TCP), DiG doesn't start the next query.
This is a mistake, because in NSSEARCH mode the queries are independent
and DiG shouldn't stop the lookup process just because setting up (or
connecting to) one of the name servers returns an error code in the
`udp_ready()` or `tcp_connected()` callbacks.
Write a new `nssearch_next()` function which takes care of starting the
next query in NSSEARCH mode, so it can be used in several places without
code repetition.
Make sure that the `udp_ready()` and `tcp_connected()` functions call
`nssearch_next()` in case they won't be calling `send_udp()` and
`send_tcp()` respectively, because in that case the `send_done()`
callback, which usually does the job, won't be called.
Refactor `send_done()` to use the newly written `nssearch_next()`
function.
In the NSSEARCH followup lookup, when one of the queries fails to be
sent, DiG doesn't start the next query. This is a mistake, because in
NSSEARCH mode the queries are independent and DiG shouldn't stop the
lookup process just because sending a query to one of the name servers
returns an error code.
Restructure the `send_done()` function to unconditionally send the next
query in NSSEARCH mode, if it exists.
DiG implements different logic in the `recv_done()` callback function
when processing a failure:
1. For a timed-out query it applies the "retries" logic first, then,
when it fails, fail-overs to the next server.
2. For an EOF (end-of-file, or unexpected disconnect) error it tries to
make a single retry attempt (even if the user has requested more
retries), then, when it fails, fail-overs to the next server.
3. For other types of failures, DiG does not apply the "retries" logic,
and tries to fail-over to the next servers (again, even if the user
has requested to make retries).
Simplify the logic and apply the same logic (1) of first retries, and
then fail-over, for different types of failures in `recv_done()`.
Artem Boldariev
Mark Andrews
Aram Sargsyan
Ondřej Surý
Evan Hunt
Tony FinchandOndřej Surý
Michal Nowak
