When a zone has a skr structure, lookup the currently active bundle
that contains the right key and signature material.
(cherry picked from commit 63e058c29e)
This added source code stores SKR data. It is loosely based on:
https://www.iana.org/dnssec/archive/files/draft-icann-dnssec-keymgmt-01.txt
A SKR contains a list of signed DNSKEY RRsets. Each change in data
should be stored in a separate bundle. So if the RRSIG is refreshed that
means it is stored in the next bundle. Likewise, if there is a new ZSK
pre-published, it is in the next bundle.
In addition (not mentioned in the draft), each bundle may contain
signed CDS and CDNSKEY RRsets.
Each bundle has an inception time. These will determine when we need
to re-sign or re-key the zone.
(cherry picked from commit 445722d2bf)
Add a new configuration option to enable Offline KSK key management.
Offline KSK cannot work with CSK because it splits how keys with the
KSK and ZSK role operate. Therefore, one key cannot have both roles.
Add a configuration check to ensure this.
(cherry picked from commit 0598381236)
During a reconfiguration named doesn't reconfigure catalog zones
member zones. Implement the necessary code to reconfigure catz
member zones.
(cherry picked from commit fd71ed5d73ae2dc968e8782ce652fb8ef257c25e)
The fcount_incr() was not increasing counter->count when force was set
to true, but fcount_decr() would try to decrease the counter leading to
underflow and assertion failure. Swap the order of the arguments in the
condition, so the !force is evaluated after incrementing the .count.
(cherry picked from commit 8e86e55af1)
MAX_RESTARTS is no longer hard-coded; ns_server_setmaxrestarts()
and dns_client_setmaxrestarts() can now be used to modify the
max-restarts value at runtime. in both cases, the default is 11.
(cherry picked from commit c5588babaf)
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
(cherry picked from commit 05d78671bb)
previously, validator queries for DNSKEY and DS records were
not counted toward the quota for max-recursion-queries; they
are now.
(cherry picked from commit af7db89513)
there were cases in resolver.c when queries for NS records were
started without passing a pointer to the parent fetch's query counter;
as a result, the max-recursion-queries quota for those queries started
counting from zero, instead of sharing the limit for the parent fetch,
making the quota ineffective in some cases.
(cherry picked from commit d3b7e92783)
When adding glue to the header, we add header to the wait-free stack to
be cleaned up later which sets wfc_node->next to non-NULL value. When
the actual cleaning happens we would only cleanup the .glue_list, but
since the database isn't locked for the time being, the headers could be
reused while cleaning the existing glue entries, which creates a data
race between database versions.
Revert the code back to use per-database-version hashtable where keys
are the node pointers. This allows each database version to have
independent glue cache table that doesn't affect nodes or headers that
could already "belong" to the future database version.
(cherry picked from commit 5beae5faf9)
when searching the cache for a node so that we can delete an
rdataset, it is not necessary to set the 'create' flag. if the
node doesn't exist yet, we then we won't be able to delete
anything from it anyway.
(cherry picked from commit 6b720bfe1a)
when a priming query is complete, it's currently logged at
level ISC_LOG_DEBUG(1), regardless of success or failure. we
are now raising it to ISC_LOG_NOTICE in the case of failure.
(cherry picked from commit a84d54c6ff)
The fcount_incr() was incorrectly skipping the accounting for the
fetches-per-zone if the force argument was set to true. We want to skip
the accounting only when the fetches-per-zone is completely disabled,
but for individual names we need to do the accounting even if we are
forcing the result to be success.
(cherry picked from commit a513d4c07f)
Decrementing optlen immediately before calling continue is unneccesary
and inconsistent with the rest of dns_message_pseudosectiontoyaml
and dns_message_pseudosectiontotext. Coverity was also reporting
an impossible false positive overflow of optlen (CID 499061).
4176 } else if (optcode == DNS_OPT_CLIENT_TAG) {
4177 uint16_t id;
4178 ADD_STRING(target, "; CLIENT-TAG:");
4179 if (optlen == 2U) {
4180 id = isc_buffer_getuint16(&optbuf);
4181 snprintf(buf, sizeof(buf), " %u\n", id);
4182 ADD_STRING(target, buf);
CID 499061: (#1 of 1): Overflowed constant (INTEGER_OVERFLOW)
overflow_const: Expression optlen, which is equal to 65534, underflows
the type that receives it, an unsigned integer 16 bits wide.
4183 optlen -= 2;
4184 POST(optlen);
4185 continue;
4186 }
4187 } else if (optcode == DNS_OPT_SERVER_TAG) {
(cherry picked from commit 47338c2c87)
There are use cases for which shorter timeout values make sense.
For example if there is a load balancer which sets RD=1 and
forwards queries to a BIND resolver which is then configured to
talk to backend servers which are not visible in the public NS set.
WIth a shorter timeout value the frontend can give back SERVFAIL
early when backends are not available and the ultimate client will
not penalize the BIND-frontend for non-response.
(cherry picked from commit 5f47c2b567)
With this new optional argument if there is an ongoing zone
transfer it will be aborted before a new zone transfer is scheduled.
(cherry picked from commit 402ca316ae)
The period between the most significant nibble of the IPv4 address
and the 2.0.0.2.IP6.ARPA suffix was missing resulting in the wrong
name being checked.
(cherry picked from commit bca63437a1)
In yaml mode we emit a string for each question and record. Certain
names and data could result in invalid yaml being produced. Use single
quote string for all questions and records. This requires that single
quotes get converted to two quotes within the string.
(cherry picked from commit 393d7fa78e)
ALPN are defined as 1*255OCTET in RFC 9460. commatxt_fromtext was not
rejecting invalid inputs produces by missing a level of escaping
which where later caught be dns_rdata_fromwire on reception.
These inputs should have been rejected
svcb in svcb 1 1.svcb alpn=\,abc
svcb1 in svcb 1 1.svcb alpn=a\,\,abc
and generated 00 03 61 62 63 and 01 61 00 02 61 62 63 respectively.
The correct inputs to include commas in the alpn requires double
escaping.
svcb in svcb 1 1.svcb alpn=\\,abc
svcb1 in svcb 1 1.svcb alpn=a\\,\\,abc
and generate 04 2C 61 62 63 and 06 61 2C 2C 61 62 63 respectively.
(cherry picked from commit b51c9eb797)
The key lifetime should no longer be adjusted if the key is being
retired earlier, for example because a manual rollover was started.
This would falsely be seen as a dnssec-policy lifetime reconfiguration,
and would adjust the retire/removed time again.
This also means we should update the status output, and the next
rollover scheduled is now calculated using (retire-active) instead of
key lifetime.
(cherry picked from commit 129973ebb0)
If dnssec-policy is reconfigured and the key lifetime has changed,
update existing keys with the new lifetime and adjust the retire
and removed timing metadata accordingly.
If the key has no lifetime yet, just initialize the lifetime. It
may be that the retire/removed timing metadata has already been set.
Skip keys which goal is not set to omnipresent. These keys are already
in the progress of retiring, or still unused.
(cherry picked from commit 1cec0b0448)
Instead of outright refusing to add new RR types to the cache, be a bit
smarter:
1. If the new header type is in our priority list, we always add either
positive or negative entry at the beginning of the list.
2. If the new header type is negative entry, and we are over the limit,
we mark it as ancient immediately, so it gets evicted from the cache
as soon as possible.
3. Otherwise add the new header after the priority headers (or at the
head of the list).
4. If we are over the limit, evict the last entry on the normal header
list.
Add HTTPS, SVCB, SRV, PTR, NAPTR, DNSKEY and TXT records to the list of
the priority types that are put at the beginning of the slabheader list
for faster access and to avoid eviction when there are more types than
the max-types-per-name limit.
Add support for using the offload threadpool to perform message
signature verifications. This should allow check SIG(0)-signed
messages without affecting the worker threads.
This is a tiny helper function which is used only once and can be
replaced with two function calls instead. Removing this makes
supporting asynchronous signature checking less complicated.
By default we log a rekey failure on debug level. We should probably
change the log level to error. We make an exception for when the zone
is not loaded yet, it often happens at startup that a rekey is
run before the zone is fully loaded.
when signatures were not added because of too many types already
existing at a node, the diff was not being cleaned up; this led to
a memory leak being reported at shutdown.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Replace the ISC_LIST based deadnodes implementation with isc_queue which
is wait-free and we don't have to acquire neither the tree nor node lock
to append nodes to the queue and the cleaning process can also
copy (splice) the list into a local copy without acquiring the list.
Currently, there's little benefit to this as we need to hold those
locks anyway, but in the future as we move to RCU based implementation,
this will be ready.
To align the cleaning with our event loop based model, remove the
hardcoded count for the node locks and use the number of the event loops
instead. This way, each event loop can have its own cleaning as part of
the process. Use uniform random numbers to spread the nodes evenly
between the buckets (instead of hashing the domain name).
Matthijs Mekking
Ondřej SurýandMichal Nowak
Aram SargsyanandPetr Špaček
Evan Hunt
Mark Andrews
