one of the tests in the resolver system test depends on dig
getting no response to its first two query attempts, and SERVFAIL
on the third after resolution times out.
using a 5-second retry timer in dig means the SERVFAIL response
could occur while dig is discarding the second query and preparing
to send the third. in this case the server's response could be
missed. shortening the retry interval to 4 seconds ensures that
dig has already sent the third query when the SERVFAIL response
arrives.
also, the serve-stale system test could fail due to a race in which
it timed out after waiting ten seconds for a file to be written, and
the dig timeout was just a bit longer. this is addressed by extending
the dig timeout to 11 seconds for this test.
The network manager does not support returning UDP datagrams to
clients from unexpected sources; it is therefore not possible for
dig to accept them. The "+[no]unexpected" option has therefore
been removed from the dig command and its documentation.
In order for a "fast-expire/IN: response-policy zone expired" message to
be logged in ns3/named.run, the "fast-expire" zone must first be
transferred in by that server. However, with unfavorable timing, ns3
may be stopped before it manages to fetch the "fast-expire" zone from
ns5 and after the latter has been reconfigured to no longer serve that
zone. In such a case, the "rpz" system test will report a false
positive for the relevant check. Prevent that from happening by
ensuring ns3 manages to transfer the "fast-expire" zone before getting
shut down.
Some setup scripts uses DEFAULT_ALGORITHM in their dnssec-policy
and/or initial signing. The tests still used the literal values
13, ECDSAP256SHA256, and 256. Replace those occurrences where
appropriate.
ans10 simulates a local anycast server which has both signed and
unsigned instances of a zone. 'A' queries get answered from the
signed instance. Everything else gets answered from the unsigned
instance. The resulting answer should be insecure.
"tcp-only" was not being tested correctly in the RPZ system test
because the option to the "digcmd" function that causes queries to
be sent via TCP was misspelled in one case, and was being interpreted
as a query name.
the "ckresult" function has also been changed to be case sensitive
for consistency with "digcmd".
While libltdl is a feature-rich library, BIND 9 code only uses its basic
capabilities, which are also provided by libuv and which BIND 9 already
uses for other purposes. As libuv's cross-platform shared library
handling interface is modeled after the POSIX dlopen() interface,
converting code using the latter to the former is simple. Replace
libltdl function calls with their libuv counterparts, refactoring the
code as necessary. Remove all use of libltdl from the BIND 9 source
tree.
The double equal sign ('==') is a Bash-specific string comparison
operator. Ensure the single equal sign ('=') is used in all POSIX shell
scripts in the system test suite in order to retain their portability.
On Linux core dump contains absolute path to crashed binary
Core was generated by `/home/newman/isc/ws/bind9/bin/named/.libs/lt-named -D glue-ns1 -X named.lock -m'.
However, on OpenBSD there's only a basename
Core was generated by `named'.
This commit adds support for the latter, retains the former.
Some non-POSIX shells, like /bin/csh on FreeBSD, are unable to execute
the config.guess file:
+ /bin/csh /var/tmp/gitlab_runner/builds/YdCaoq4b/0/mnowak/bind9/config.guess
timestamp=2018-02-24: Command not found.
me=config.guess: Command not found.
Unmatched '"'.
When ./configure is run, it attempts to locate a POSIX-compliant shell.
Use the result of that search in the bin/tests/system/ifconfig.sh
script.
This test is very simple, two nameserver instances are created:
- ns4: master, with 'minimal-responses yes', authoritative
for example. zone
- ns5: slave, stub zone
The first thing verified is the transfer of zone data from master
to slave, which should be saved in ns5/example.db.
After that, a query is issued to ns5 asking for target.example.
TXT, a record present in the master database with the "test" string
as content.
If that query works, it means stub zone successfully request
nameserver addresses from master, ns4.example. A/AAAA
The presence of both A/AAAA records for ns4 is also verified in the
stub zone local file, ns5/example.db.
This commit ensures that dnstap output files captured
by fstrm_capture are properly flushed before any attempt
on reading them with dnstap-read is done.
By reading fstrm-capture source code it was noticed that
signal SIGHUP is used to flush the capture file.
When networking statistics was added to the netmgr (in commit
5234a8e00a), two lines were added that
increment the 'STATID_RECVFAIL' statistic: One if 'uv_read_start'
fails and one at the end of the 'read_cb'. The latter happens
if 'nread < 0'.
According to the libuv documentation, I/O read callbacks (such as for
files and sockets) are passed a parameter 'nread'. If 'nread' is less
than 0, there was an error and 'UV_EOF' is the end of file error, which
you may want to handle differently.
In other words, we should not treat EOF as a RECVFAIL error.
Add a +burst option to mdig so that we have a second to setup the
mdig calls then they run at the start of the next second.
RRL uses 'queries in a second' as a approximation to
'queries per second'. Getting the bursts of traffic to all happen in
the same second should prevent false negatives in the system test.
We now have a second to setup the traffic in. Then the traffic should
be sent at the start of the next second. If that still fails we
should move to +burst=<now+2> (further extend mdig) instead of the
implicit <now+1> as the trigger second.
* the legacy test with -T maxudp512 will just fail, e.g. if the packets
larger than 512 octets are dropped along the path, the proper response
is to fail
* digdelv test was just expecting default server EDNS buffer size to be
4096, the test needed only slight adjustment
While working on 'rndc dnssec -rollover' I noticed the following
(small) issues:
- The key files where updated with hints set to "-when" and that
should always be "now.
- The kasp system test did not properly update the test number when
calling 'rndc dnssec -checkds' (and ensuring that works).
- There was a missing ']' in the rndc.c help output.
This command is similar in arguments as -checkds so refactor the
'named_server_dnssec' function accordingly. The only difference
are that:
- It does not take a "publish" or "withdrawn" argument.
- It requires the key id to be set (add a check to make sure).
Add tests that will trigger rollover immediately and one that
schedules a test in the future.
Sometimes, not all keys have been created in time before 'check_keys'
is called. Run a 'retry_quiet' on checking the number of keys before
continuing checking the key data.
Use the testcrypto script to see if these algorithms are supported by
openssl. If so, add the specific configuration to the named.conf file
and touch a file to indicate support. If the file exists, the
corresponding setup and tests are performed.
Make sure "order none" RRset ordering rules are tested in the
"rrsetorder" system test just like all other rule types are. As the
check for the case of no "rrset-order" rule matching a given RRset also
tests "order none" (rather than "order random", as the test code may
suggest at first glance), replace the test code for that case so that it
matches other "order none" tests.
The dns_message_create() function cannot soft fail (as all memory
allocations either succeed or cause abort), so we change the function to
return void and cleanup the calls.
Previously, the $systest directory was being removed for out-of-tree
builds at the end of each system test. Because of that, running tests
which depend on compiled objects was breaking subsequent "make check"
invocations:
make: Target 'check' not remade because of errors.
Making all in dyndb/driver
/bin/bash: line 20: cd: dyndb/driver: No such file or directory
Making all in dlzexternal/driver
/bin/bash: line 20: cd: dlzexternal/driver: No such file or directory
Address by first removing build/test artifacts for a given test and then
removing empty directories inside (and potentially including) $systest.
RPZ rules cannot be fully relied upon until the summary RPZ database is
updated after an "rndc reload". Wait until the relevant message is
logged after an "rndc reload" to prevent false positives in the
"rpzrecurse" system test caused by the RPZ rules not yet being in effect
by the time ns3 is queried.
Minor changes are:
- Replace the "$RNDCCMD dumpdb" logic with "rndc_dumpdb" from
conf.sh.common (it does the same thing).
- Update a comment to match the grep calls below it (comment said the
rest should be expired, while the grep calls indicate that they
are still in the cache, the comment now explains why).
Each dns_rpz_zone_t structure keeps a hash table of the names this RPZ
database contains. Here is what happens when an RPZ is updated:
- a new hash table is prepared for the new version of the RPZ by
iterating over it; each name found is added to the summary RPZ
database,
- every name added to the new hash table is searched for in the old
hash table; if found, it is removed from the old hash table,
- the old hash table is iterated over; all names found in it are
removed from the summary RPZ database (because at that point the old
hash table should only contain names which are not present in the
new version of the RPZ),
- the new hash table replaces the old hash table.
When the new version of the RPZ is iterated over, if a given name is
spelled using a different letter case than in the old version of the
RPZ, the new variant will hash to a different value than the old
variant, which means it will not be removed from the old hash table.
When the old hash table is subsequently iterated over to remove
seemingly deleted names, the old variant of the name will still be
there, causing the name to be deleted from the summary RPZ database
(which effectively causes a given rule to be ignored).
The issue can be triggered not just by altering the case of existing
names in an RPZ, but also by adding sibling names spelled with a
different letter case. This is because RBT code preserves case when
node splitting occurs. The end result is that when the RPZ is iterated
over, a given name may be using a different case than in the zone file
(or XFR contents).
Fix by downcasing all names found in the RPZ database before adding them
to the summary RPZ database.
No issues with the glue cache feature have been reported since its
introduction in BIND 9.12. As the rationale for introducing the
"glue-cache" option was to have a safety switch readily available in
case the glue cache turns out to cause problems, it is time to deprecate
the option. Glue cache will be permanently enabled in a future release,
at which point the "glue-cache" option will be made obsolete.
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
Evan HuntandOndřej Surý
Michal Nowak
Michał Kępień
Matthijs Mekking
Mark Andrews
Diego Fronza
Havard EidnesandMatthijs Mekking
Ondřej SurýandOndřej Surý