- Many dispatch attributes can be set implicitly instead of being passed
in. we can infer whether to set DNS_DISPATCHATTR_TCP or _UDP from
whether we're calling dns_dispatch_createtcp() or _createudp(). we
can also infer DNS_DISPATCHATTR_IPV4 or _IPV6 from the addresses or
the socket that were passed in.
- We no longer use dup'd sockets in UDP dispatches, so the 'dup_socket'
parameter has been removed from dns_dispatch_createudp(), along with
the code implementing it. also removed isc_socket_dup() since it no
longer has any callers.
- The 'buffersize' parameter was ignored and has now been removed;
buffersize is now fixed at 4096.
- Maxbuffers and maxrequests don't need to be passed in on every call to
dns_dispatch_createtcp() and _createudp().
In all current uses, the value for mgr->maxbuffers will either be
raised once from its default of 20000 to 32768, or else left
alone. (passing in a value lower than 20000 does not lower it.) there
isn't enough difference between these values for there to be any need
to configure this.
The value for disp->maxrequests controls both the quota of concurrent
requests for a dispatch and also the size of the dispatch socket
memory pool. it's not clear that this quota is necessary at all. the
memory pool size currently starts at 32768, but is sometimes lowered
to 4096, which is definitely unnecessary.
This commit sets both values permanently to 32768.
- Previously TCP dispatches allocated their own separate QID table,
which didn't incorporate a port table. this commit removes
per-dispatch QID tables and shares the same table between all
dispatches. since dispatches are created for each TCP socket, this may
speed up the dispatch allocation process. there may be a slight
increase in lock contention since all dispatches are sharing a single
QID table, but since TCP sockets are used less often than UDP
sockets (which were already sharing a QID table), it should not be a
substantial change.
- The dispatch port table was being used to determine whether a port was
already in use; if so, then a UDP socket would be bound with
REUSEADDR. this commit removes the port table, and always binds UDP
sockets that way.
Currently the netmgr doesn't support unconnected, shared UDP sockets, so
there's no reason to retain that functionality in the dispatcher prior
to porting to the netmgr.
In this commit, the DNS_DISPATCHATTR_EXCLUSIVE attribute has been
removed as it is now non-optional; UDP dispatches are alwasy exclusive.
Code implementing non-exclusive UDP dispatches has been removed.
dns_dispatch_getentrysocket() now always returns the dispsocket for UDP
dispatches and the dispatch socket for TCP dispatches.
There is no longer any need to search for existing dispatches from
dns_dispatch_getudp(), so the 'mask' option has been removed, and the
function renamed to the more descriptive dns_dispatch_createudp().
- UDP buffersize is now established when creating dispatch manager
and is always set to 4096.
- Set up the default port range in dispatchmgr before setting the magic
number.
- Magic is not set until dispatchmgr is fully created.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
The additional processing method has been expanded to take the
owner name of the record, as HTTPS and SVBC need it to process "."
in service form.
The additional section callback can now return the RRset that was
added. We use this when adding CNAMEs. Previously, the recursion
would stop if it detected that a record you added already exists. With
CNAMEs this rule doesn't work, as you ultimately care about the RRset
at the target of the CNAME and not the presence of the CNAME itself.
Returning the record allows the caller to restart with the target
name. As CNAMEs can form loops, loop protection was added.
As HTTPS and SVBC can produce infinite chains, we prevent this by
tracking recursion depth and stopping if we go too deep.
Current mempools are kind of hybrid structures - they serve two
purposes:
1. mempool with a lock is basically static sized allocator with
pre-allocated free items
2. mempool without a lock is a doubly-linked list of preallocated items
The first kind of usage could be easily replaced with jemalloc small
sized arena objects and thread-local caches.
The second usage not-so-much and we need to keep this (in
libdns:message.c) for performance reasons.
The last remaining defines needed for platforms without NAME_MAX and
PATH_MAX (I'm looking at you, GNU Hurd) were moved to isc/dir.h where
it's prevalently used.
The Makefile.tests was modifying global AM_CFLAGS and LDADD and could
accidentally pull /usr/include to be listed before the internal
libraries, which is known to cause problems if the headers from the
previous version of BIND 9 has been installed on the build machine.
This commit adds a unittest that tests private rdataset_getownercase()
and rdataset_setownercase() methods from rbtdb.c. The test setups
minimal mock dns_rbtdb_t and dns_rbtdbnode_t data structures.
As the rbtdb methods are generally hidden behind layers and layers, we
include the "rbtdb.c" directly from rbtdb_test.c, and thus we can use
the private methods and data structures directly. This also opens up
opportunity to add more unittest for the rbtdb private functions without
going through all the layers.
if dns_updatemethod_date is used do that the returned method is only
set to dns_updatemethod_increment if the new serial does not encode
the current day (YYYYMMDDXX).
Unit test run for out-of-tree builds used to fail to find
masterXX.data.in files:
/usr/bin/perl -w /builds/mnowak/bind9/lib/dns/tests/mkraw.pl < testdata/master/master12.data.in > testdata/master/master12.data
/bin/bash: testdata/master/master12.data.in: No such file or directory
make[4]: *** [Makefile:1910: testdata/master/master12.data] Error 1
With taskmgr running on top of netmgr, the ordering of how the tasks and
netmgr shutdown interacts was wrong as previously isc_taskmgr_destroy()
was waiting until all tasks were properly shutdown and detached. This
responsibility was moved to netmgr, so we now need to do the following:
1. shutdown all the tasks - this schedules all shutdown events onto
the netmgr queue
2. shutdown the netmgr - this also makes sure all the tasks and
events are properly executed
3. Shutdown the taskmgr - this now waits for all the tasks to finish
running before returning
4. Shutdown the netmgr - this call waits for all the netmgr netievents
to finish before returning
This solves the race when the taskmgr object would be destroyed before
all the tasks were finished running in the netmgr loops.
Previously, netmgr, taskmgr, timermgr and socketmgr all had their own
isc_<*>mgr_create() and isc_<*>mgr_destroy() functions. The new
isc_managers_create() and isc_managers_destroy() fold all four into a
single function and makes sure the objects are created and destroy in
correct order.
Especially now, when taskmgr runs on top of netmgr, the correct order is
important and when the code was duplicated at many places it's easy to
make mistake.
The former isc_<*>mgr_create() and isc_<*>mgr_destroy() functions were
made private and a single call to isc_managers_create() and
isc_managers_destroy() is required at the program startup / shutdown.
* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
It is more intuitive to have the countdown 'max-stale-ttl' as the
RRset TTL, instead of 0 TTL. This information was already available
in a comment "; stale (will be retained for x more seconds", but
Support suggested to put it in the TTL field instead.
Commit fa505bfb0e omitted two unit tests
while introducing the SKIP_TEST_EXIT_CODE preprocessor macro. Fix the
outliers to make use of SKIP_TEST_EXIT_CODE consistent across all unit
tests. Also make sure lib/dns/tests/dnstap_test returns an exit code
that indicates a skipped test when dnstap is not enabled.
When using the `unixtime` or `date` method to update the SOA serial,
`named` and `dnssec-signzone` would silently fallback to `increment`
method to prevent the new serial number to be smaller than the old
serial number (using the serial number arithmetics). Add a warning
message when such fallback happens.
Make sure pointer checks in unit tests use cmocka assertion macros
dedicated for use with pointers instead of those dedicated for use with
integers or booleans.
Add unit test to ensure the right NSEC3PARAM event is scheduled in
'dns_zone_setnsec3param()'. To avoid scheduling and managing actual
tasks, split up the 'dns_zone_setnsec3param()' function in two parts:
1. 'dns__zone_lookup_nsec3param()' that will check if the requested
NSEC3 parameters already exist, and if a new salt needs to be
generated.
2. The actual scheduling of the new NSEC3PARAM event (if needed).
The dns_message_create() function cannot soft fail (as all memory
allocations either succeed or cause abort), so we change the function to
return void and cleanup the calls.
The clang 12 has a new warning that warns when using multi-line strings
in the string arrays, f.e.:
{ "aa",
"b"
"b",
"cc" }
would generate warning like this:
private_test.c:162:7: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"33333/RSASHA1" };
^
private_test.c:161:7: note: place parentheses around the string literal to silence warning
"Done removing signatures for key "
^
private_test.c:197:7: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"NSEC chain",
^
private_test.c:196:7: note: place parentheses around the string literal to silence warning
"Removing NSEC3 chain 1 0 30 DEAF / creating "
^
2 errors generated.
