dns_dispatch_connect() connects a dispatch socket (for TCP) or a
dispatch entry socket (for UDP). This is the next step in moving all
uses of the isc_socket code into the dispatch module.
This API is temporary; it needs to be cleaned up further so that it can
be called the same way for both TCP and UDP.
Continuing the effort to move all uses of the isc_socket API into
dispatch.c, this commit removes the dns_tcpmsg module entirely, as
dispatch was its only caller, and moves the parts of its functionality
that were being used into the dispatch module.
This code will be removed when we switch to using netmgr TCPDNS.
Previously, creation of TCP dispatches differed from UDP in that a TCP
dispatch was created to attach to an existing socket, whereas a UDP
dispatch would be created in a vacuum and sockets would be opened on
demand when a transaction was initiated.
We are moving as much socket code as possible into the dispatch module,
so that it can be replaced with a netmgr version as easily as
possible. (This will also have the side effect of making TCP and UDP
dispatches more similar.)
As a step in that direction, this commit changes
dns_dispatch_createtcp() so that it creates the TCP socket.
- Many dispatch attributes can be set implicitly instead of being passed
in. we can infer whether to set DNS_DISPATCHATTR_TCP or _UDP from
whether we're calling dns_dispatch_createtcp() or _createudp(). we
can also infer DNS_DISPATCHATTR_IPV4 or _IPV6 from the addresses or
the socket that were passed in.
- We no longer use dup'd sockets in UDP dispatches, so the 'dup_socket'
parameter has been removed from dns_dispatch_createudp(), along with
the code implementing it. also removed isc_socket_dup() since it no
longer has any callers.
- The 'buffersize' parameter was ignored and has now been removed;
buffersize is now fixed at 4096.
- Maxbuffers and maxrequests don't need to be passed in on every call to
dns_dispatch_createtcp() and _createudp().
In all current uses, the value for mgr->maxbuffers will either be
raised once from its default of 20000 to 32768, or else left
alone. (passing in a value lower than 20000 does not lower it.) there
isn't enough difference between these values for there to be any need
to configure this.
The value for disp->maxrequests controls both the quota of concurrent
requests for a dispatch and also the size of the dispatch socket
memory pool. it's not clear that this quota is necessary at all. the
memory pool size currently starts at 32768, but is sometimes lowered
to 4096, which is definitely unnecessary.
This commit sets both values permanently to 32768.
- Previously TCP dispatches allocated their own separate QID table,
which didn't incorporate a port table. this commit removes
per-dispatch QID tables and shares the same table between all
dispatches. since dispatches are created for each TCP socket, this may
speed up the dispatch allocation process. there may be a slight
increase in lock contention since all dispatches are sharing a single
QID table, but since TCP sockets are used less often than UDP
sockets (which were already sharing a QID table), it should not be a
substantial change.
- The dispatch port table was being used to determine whether a port was
already in use; if so, then a UDP socket would be bound with
REUSEADDR. this commit removes the port table, and always binds UDP
sockets that way.
Currently the netmgr doesn't support unconnected, shared UDP sockets, so
there's no reason to retain that functionality in the dispatcher prior
to porting to the netmgr.
In this commit, the DNS_DISPATCHATTR_EXCLUSIVE attribute has been
removed as it is now non-optional; UDP dispatches are alwasy exclusive.
Code implementing non-exclusive UDP dispatches has been removed.
dns_dispatch_getentrysocket() now always returns the dispsocket for UDP
dispatches and the dispatch socket for TCP dispatches.
There is no longer any need to search for existing dispatches from
dns_dispatch_getudp(), so the 'mask' option has been removed, and the
function renamed to the more descriptive dns_dispatch_createudp().
The DNS_REQUESTOPT_SHARE flag was added when client-side pipelining of
TCP queries was implemented. there was no need to make it optional;
forcing it to be in effect for all requests simplfiies the code.
- UDP buffersize is now established when creating dispatch manager
and is always set to 4096.
- Set up the default port range in dispatchmgr before setting the magic
number.
- Magic is not set until dispatchmgr is fully created.
- DNS_DISPATCHATTR_CANREUSE was never set. the code that implements it
has been removed.
- DNS_DISPATCHOPT_FIXEDID and DNS_DISPATCHATTR_FIXEDID were both
defined, but only the DISPATCHOPT was ever set; it appears the
DISPATCHATTR was added accidentally.
- DNS_DISPATCHATTR_NOLISTEN was set but never used.
"cache-file" was already documented as intended for testing
purposes only and not to be used, so we can remove it without
waiting. this commit marks the option as "ancient", and
removes all the documentation and implementing code, including
dns_cache_setfilename() and dns_cache_dump().
it also removes the documentation for the '-x cachefile`
parameter to named, which had already been removed, but the man
page was not updated at the time.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
- removed unused functions
- changed some public functions to static that are never called
from outside client.c
- removed unused types and function prototypes
- renamed dns_client_destroy() to dns_client_detach()
The previous versions of BIND 9 exported its internal libraries so that
they can be used by third-party applications more easily. Certain
library functions were altered from specific BIND-only behavior to more
generic behavior when used by other applications.
This commit removes the function isc_lib_register() that was used by
external applications to enable the functionality.
Clear the key slots for dnssec-sign statistics for keys that are
removed. This way, the number of slots will stabilize to the maximum
key usage in a zone and will not grow every time a key rollover is
triggered.
The additional processing method has been expanded to take the
owner name of the record, as HTTPS and SVBC need it to process "."
in service form.
The additional section callback can now return the RRset that was
added. We use this when adding CNAMEs. Previously, the recursion
would stop if it detected that a record you added already exists. With
CNAMEs this rule doesn't work, as you ultimately care about the RRset
at the target of the CNAME and not the presence of the CNAME itself.
Returning the record allows the caller to restart with the target
name. As CNAMEs can form loops, loop protection was added.
As HTTPS and SVBC can produce infinite chains, we prevent this by
tracking recursion depth and stopping if we go too deep.
The isc/platform.h header was left empty which things either already
moved to config.h or to appropriate headers. This is just the final
cleanup commit.
Similar to notify, add code to send and keep track of checkds requests.
On every zone_rekey event, we will check the DS at parental agents
(but we will only actually query parental agents if theree is a DS
scheduled to be published/withdrawn).
On a zone_rekey event, we will first clear the ongoing checkds requests.
Reset the counter, to avoid continuing KSK rollover premature.
This has the risk that if zone_rekey events happen too soon after each
other, there are redundant DS queries to the parental agents. But
if TTLs and the configured durations in the dnssec-policy are sane (as
in not ridiculous short) the chance of this happening is low.
This code gathers DNSSEC keys from key files and from the DNSKEY RRset.
It is used for the 'rndc dnssec -status' command, but will also be
needed for "checkds". Turn it into a function.
Change the static function 'get_ksk_zsk' to a library function that
can be used to determine the role of a dst_key. Add checks if the
boolean parameters to store the role are not NULL. Rename to
'dst_key_role'.
When "max-cache-size" is changed to "unlimited" (or "0") for a running
named instance (using "rndc reconfig"), the hash table size limit for
each affected cache DB is not reset to the maximum possible value,
preventing those hash tables from being allowed to grow as a result of
new nodes being added.
Extend dns_rbt_adjusthashsize() to interpret "size" set to 0 as a signal
to remove any previously imposed limits on the hash table size. Adjust
API documentation for dns_db_adjusthashsize() accordingly. Move the
call to dns_db_adjusthashsize() from dns_cache_setcachesize() so that it
also happens when "size" is set to 0.
Previously, dumping the zones to the files were quantized, so it doesn't
slow down network IO processing. With the introduction of network
manager asynchronous threadpools, we can move the IO intensive work to
use that API and we don't have to quantize the work anymore as it the
file IO won't block anything except other zone dumping processes.
Rather than having an expensive 'expired' (fka 'stale_ttl') in the
rdataset structure, that is only used to be printed in a comment on
ancient RRsets, reuse the TTL field of the RRset.
Commit a83c8cb0af updated masterdump so
that stale records in "rndc dumpdb" output no longer shows 0 TTLs. In
this commit we change the name of the `rdataset->stale_ttl` field to
`rdataset->expired` to make its purpose clearer, and set it to zero in
cases where it's unused.
Add 'rbtdb->serve_stale_ttl' to various checks so that stale records
are not purged from the cache when they've been stale for RBTDB_VIRTUAL
(300) seconds.
Increment 'ns_statscounter_usedstale' when a stale answer is used.
Note: There was a question of whether 'overmem_purge' should be
purging ancient records, instead of stale ones. It is left as purging
stale records, since stale records could take up the majority of the
cache.
This submission is copyrighted Akamai Technologies, Inc. and provided
under an MPL 2.0 license.
This commit was originally authored by Kevin Chen, and was updated by
Matthijs Mekking to match recent serve-stale developments.
Previously, as a way of reducing the contention between threads a
clientmgr object would be created for each interface/IP address.
We tasks being more strictly bound to netmgr workers, this is no longer
needed and we can just create clientmgr object per worker queue (ncpus).
Each clientmgr object than would have a single task and single memory
context.
dns_message_gettempname() returns an initialized name with a dedicated
buffer, associated with a dns_fixedname object. Using dns_name_copynf()
to write a name into this object will actually copy the name data
from a source name. dns_name_clone() merely points target->ndata to
source->ndata, so it is faster, but it can lead to a use-after-free if
the source is freed before the target object is released via
dns_message_puttempname().
In a few places, clone was being used where copynf should have been;
this is now fixed.
As a side note, no memory was lost, because the ndata buffer used in
the dns_fixedname_t is internal to the structure, and is freed when
the dns_fixedname_t is freed regardless of the .ndata contents.
dns_message_gettempname() now returns a pointer to an initialized
name associated with a dns_fixedname_t object. it is no longer
necessary to allocate a buffer for temporary names associated with
the message object.
This function has never been used since it was added to the source tree
by commit 686b27bfd3 back in 1999. As
the dns_zoneflg_t type is only defined in lib/dns/zone.c, no function
external to that file would be able to use dns_zone_setflag() properly
anyway - the DNS_ZONE_SETFLAG() and DNS_ZONE_CLRFLAG() macros should be
used instead. Zone options that can be set from outside zone.c are set
using dns_zone_setoption().
all zone loading tasks have the privileged flag, but we only want
them to run as privileged tasks when the server is being initialized;
if we privilege them the rest of the time, the server may hang for a
long time after a reload/reconfig. so now we call isc_taskmgr_setmode()
to turn privileged execution mode on or off in the task manager.
isc_task_privileged() returns true if the task's privilege flag is
set *and* the taskmgr is in privileged execution mode. this is used
to determine in which netmgr event queue the task should be run.
