Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
The isc_stats_create() can no longer return anything else than
ISC_R_SUCCESS. Refactor isc_stats_create() and its variants in libdns,
libns and named to just return void.
1. Change the _new, _add and _copy functions to return the new object
instead of returning 'void' (or always ISC_R_SUCCESS)
2. Cleanup the isc_ht_find() + isc_ht_add() usage - the code is always
locked with catzs->lock (mutex), so when isc_ht_find() returns
ISC_R_NOTFOUND, the isc_ht_add() must always succeed.
3. Instead of returning direct iterator for the catalog zone entries,
add dns_catz_zone_for_each_entry2() function that calls callback
for each catalog zone entry and passes two extra arguments to the
callback. This will allow changing the internal storage for the
catalog zone entries.
4. Cleanup the naming - dns_catz_<fn>_<obj> -> dns_catz_<obj>_<fn>, as an
example dns_catz_new_zone() gets renamed to dns_catz_zone_new().
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
Some 'rndc signing' commands can still be used in conjunction with
'dnssec-policy' because it shows the progress of signing and
private type records can be cleaned up. Allow these commands to be
executed.
However, setting NSEC3 parameters is incompatible with dnssec-policy.
BIND's rdataset structure is a view of some DNS records. It is
polymorphic, so the details of how the records are stored can vary.
For instance, the records can be held in an rdatalist, or in an
rdataslab in the rbtdb.
The dns_rdataset structure previously had a number of fields called
`private1` up to `private7`, which were used by the various rdataset
implementations. It was not at all clear what these fields were for,
without reading the code and working it out from context.
This change makes the rdataset inheritance hierarchy more clear. The
polymorphic part of a `struct dns_rdataset` is now a union of structs,
each of which is named for the class of implementation using it. The
fields of these structs replace the old `privateN` fields. (Note: the
term "inheritance hierarchy" refers to the fact that the builtin and
SDLZ implementations are based on and inherit from the rdatalist
implementation, which in turn inherits from the generic rdataset.
Most of this change is mechanical, but there are a few extras.
In keynode.c there were a number of REQUIRE()ments that were not
necessary: they had already been checked by the rdataset method
dispatch code. On the other hand, In ncache.c there was a public
function which needed to REQUIRE() that an rdataset was valid.
I have removed lots of "reset iterator state" comments, because it
should now be clear from `target->iter = NULL` where before
`target->private5 = NULL` could have been doing anything.
Initialization is a bit neater in a few places, using C structure
literals where appropriate.
The pointer arithmetic for translating between an rdataslab header and
its raw contents is now fractionally safer.
The ability to read legacy HMAC-MD5 K* keyfile pairs using algorithm
number 157 was accidentally lost when the algorithm numbers were
consolidated into a single block, in commit
09f7e0607a.
The assumption was that these algorithm numbers were only known
internally, but they were also used in key files. But since HMAC-MD5
got renumbered from 157 to 160, legacy HMAC-MD5 key files no longer
work.
Move HMAC-MD5 back to 157 and GSSAPI back to 160. Add exception for
GSSAPI to list_hmac_algorithms.
view->adb may be referenced while the view is shutting down as the
zone uses a weak reference to the view and examines view->adb but
dns_view_detach call dns_adb_detach to clear view->adb.
since it is not necessary to find partial matches when looking
up names in a TSIG keyring, we can use a hash table instead of
an RBT to store them.
the tsigkey object now stores the key name as a dns_fixedname
rather than allocating memory for it.
the `name` parameter to dns_tsigkeyring_add() has been removed;
it was unneeded since the tsigkey object already contains a copy
of the name.
the opportunistic cleanup_ring() function has been removed;
it was only slowing down lookups.
the prior practice of passing a dns_name containing the
expanded name of an algorithm to dns_tsigkey_create() and
dns_tsigkey_createfromkey() is unnecessarily cumbersome;
we can now pass the algorithm number instead.
use the ISC_REFCOUNT attach/detach implementation in dns/tsig.c
so that detailed tracing can be used during refactoring.
dns_tsig_keyring_t has been renamed dns_tsigkeyring_t so the type
and the attach/detach function names will match.
- style cleanups.
- simplify the function parameters to dns_tsigkey_create():
+ remove 'restored' and 'generated', they're only ever set to false.
+ remove 'creator' because it's only ever set to NULL.
+ remove 'inception' and 'expiry' because they're only ever set to
(0, 0) or (now, now), and either way, this means "never expire".
+ remove 'ring' because we can just use dns_tsigkeyring_add() instead.
- rename dns_keyring_restore() to dns_tsigkeyring_restore() to match the
rest of the functions operating on dns_tsigkeyring objects.
it was possible to add a TSIG key to more than one TSIG
keyring at a time, and this was in fact happening with the
session key, which was generated once and then added to the
keyrings for each view as it was configured.
this has been corrected and a REQUIRE added to dns_tsigkeyring_add()
to prevent it from happening again.
The 'named_g_server->interfacemgr' pointer is saved in the zone
structure using dns_zone_setisself(), as a void* argument to be
passed to the isself() callback, so there is no attach/detach,
and when shutting down, the interface manager can be destroyed
by the shutdown_server(), running in exclusive mode, and causing
isself() to crash when trying to use the pointer.
Instead of keeping the interface manager pointer in the zone
structure, just check and use the 'named_g_server->interfacemgr'
itself, as it was implemented originally in the
3aca8e5bf3 commit. Later, in the
8eb88aafee commit, the code was
changed to pass the interface manager pointer using the additional
void* argument, but the commit message doesn't mention if there
was any practical reason for that.
Additionally, don't pass the interfacemgr pointer to the
ns_interfacemgr_getaclenv() function before it is checked
against NULL.
'-T transferinsecs' makes named interpret the max-transfer-time-out,
max-transfer-idle-out, max-transfer-time-in and max-transfer-idle-in
configuration options as seconds instead of minutes.
'-T transferslowly' makes named to sleep for one second for every
xfrout message.
'-T transferstuck' makes named to sleep for one minute for every
xfrout message.
When shutting down TCP sockets, the read callback calling logic was
flawed, it would call either one less callback or one extra. Fix the
logic in the way:
1. When isc_nm_read() has been called but isc_nm_read_stop() hasn't on
the handle, the read callback will be called with ISC_R_CANCELED to
cancel active reading from the socket/handle.
2. When isc_nm_read() has been called and isc_nm_read_stop() has been
called on the on the handle, the read callback will be called with
ISC_R_SHUTTINGDOWN to signal that the dormant (not-reading) socket
is being shut down.
3. The .reading and .recv_read flags are little bit tricky. The
.reading flag indicates if the outer layer is reading the data (that
would be uv_tcp_t for TCP and isc_nmsocket_t (TCP) for TLSStream),
the .recv_read flag indicates whether somebody is interested in the
data read from the socket.
Usually, you would expect that the .reading should be false when
.recv_read is false, but it gets even more tricky with TLSStream as
the TLS protocol might need to read from the socket even when sending
data.
Fix the usage of the .recv_read and .reading flags in the TLSStream
to their true meaning - which mostly consist of using .recv_read
everywhere and then wrapping isc_nm_read() and isc_nm_read_stop()
with the .reading flag.
4. The TLS failed read helper has been modified to resemble the TCP code
as much as possible, clearing and re-setting the .recv_read flag in
the TCP timeout code has been fixed and .recv_read is now cleared
when isc_nm_read_stop() has been called on the streaming socket.
5. The use of Network Manager in the named_controlconf, isccc_ccmsg, and
isc_httpd units have been greatly simplified due to the improved design.
6. More unit tests for TCP and TLS testing the shutdown conditions have
been added.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
isc_loopmgr_pause can't be called before isc_loopmgr_run is
called as the thread ids are not yet valid. If there is a
fatal error before isc_loopmgr_run is run then don't call
isc_loopmgr_pause.
This change makes the zone table lock-free for reads. Previously, the
zone table used a red-black tree, which is not thread safe, so the hot
read path acquired both the per-view mutex and the per-zonetable
rwlock. (The double locking was to fix to cleanup races on shutdown.)
One visible difference is that zones are not necessarily shut down
promptly: it depends on when the qp-trie garbage collector cleans up
the zone table. The `catz` system test checks several times that zones
have been deleted; the test now checks for zones to be removed from
the server configuration, instead of being fully shut down. The catz
test does not churn through enough zones to trigger a gc, so the zones
are not fully detached until the server exits.
After this change, it is still possible to improve the way we handle
changes to the zone table, for instance, batching changes, or better
compaction heuristics.
If the 'checkds' option is not explicitly set, check if there are
'parental-agents' for the zone configured. If so, default to "explicit",
otherwise default to "yes".
Add a new configuration option to set how the checkds method should
work. Acceptable values are 'yes', 'no', and 'explicit'.
When set to 'yes', the checkds method is to lookup the parental agents
by querying the NS records of the parent zone.
When set to 'no', no checkds method is enabled. Users should run
the 'rndc checkds' command to signal that DS records are published and
withdrawn.
When set to 'explicit', the parental agents are explicitly configured
with the 'parental-agents' configuration option.
This should have no functional effects.
The message size stats are specified by RSSAC002 so it's best not
to mess around with how they appear in the statschannel. But it's
worth changing the implementation to use general-purpose histograms,
to reduce code size and benefit from sharded counters.
Cleanup the remnants of MS Compiler bits from <isc/refcount.h>, printing
the information in named/main.c, and cleanup some comments about Windows
that no longer apply.
The bits in picohttpparser.{h,c} were left out, because it's not our
code.
When fatal is called we may be holding memory allocated by OpenSSL.
This may result in the reference count for the FIPS provider not
going to zero and the shared library not being unloaded during
OPENSSL_cleanup. When the shared library is ultimately unloaded,
when all remaining dynamically loaded libraries are freed, we have
already destroyed the memory context we where using to track memory
leaks / late frees resulting in INSIST being called.
Disable triggering the INSIST when fatal has being called.
There are times where you want named-checkconf to check whether the
dnssec-policies should be constrained by the cryptographic algorithms
supported by the operation system or to just accept all possible
algorithms. This provides a mechanism to make that selection.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
This is a simple replacement using the semantic patch from the previous
commit and as added bonus, one removal of previously undetected unused
variable in named/server.c.
It's sometimes helpful to get a quick idea of the call stack when
debugging. This change factors out the backtrace logging from named's
fatal error handler so that it's easy to use in other places too.
enable DNSRPS in the continuous integration tests
this triggered a build failure in OpenBSD; building with DNSRPS
causes arpa/nameser.h to be included, which defines the value
STATUS. that value was then reused in server.c renaming the
value to STAT corrects the error.
for testing purposes, we need to be able to specify a library path from
which to load the dnsrps implementation. this can now be done with the
"dnsrps-library" option.
DNSRPS can now be enabled in configure regardless of whether librpz.so
is currently installed on the system.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
stop and restart the server in the 'tsiggss' test, in order
to confirm that GSS negotiated TSIG keys are saved and restored
when named loads.
added logging to dns_tsigkey_createfromkey() to indicate whether
a key has been statically configured, generated via GSS negotiation,
or restored from a file.
