The test expects a "connection timed out" message from DiG when it
experiences a timeout, while the current version of DiG prints just
a "timed out" message, like below:
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
; <<>> DiG 9.19.9-dev <<>> -p 11314 +tries +time +tcp +tries +time @10.53.0.1 dropedns. TXT
; (1 server found)
;; global options: +cmd
;; no servers could be reached
Change the expected string to match the current DiG output.
Use the '-F' switch for "grep" for matching a fixed string.
(cherry picked from commit 35988748f3)
In order to have a common naming convention for system tests, rename the
only outlier "engine_pkcs11" to "enginepkcs11", which was the only
system test using an underscore in its name.
The only allowed word separators for system test names are either dash
or no separator.
(cherry picked from commit 62eea511db)
It is better to use consistent file names to avoid issue with sorting
etc.
Using underscore in filenames as opposed to dash was chosen because it
seems more common in pytest/python to use underscore for filenames.
Also rename the bin/tests/system/timeouts/tests-tcp.py file to
bin/tests/system/timeouts/tests_tcp_timeouts.py to avoid pytest name
collision (there can't be two files named tests_tcp.py).
(cherry picked from commit f6409ee6ac)
This introduces a Python dependency for running system tests. It is
needed in order to:
- write new test control scripts in Python
- gradually rewrite old Perl scripts into Python if needed
- eventually introduce pytest as the new test runner framework
This commit is not intended to be backported to 9.16.
(cherry picked from commit 56416ebd65)
This change has no practical impact, as Perl was already required for
all system tests, this check only makes it more explicit.
(cherry picked from commit 084d72d1d5)
Nothing from conf.sh.common is required to set these values. On the
contrary, a Python interpreter needs to be set in order to randomize the
algorithm set (which happens in conf.sh.common).
(cherry picked from commit 492992dca8)
When testcrypto.sh is used as a standalone script, always use quiet mode
to avoid using undefined commands (such as echo_i) which require
inclusion of the entire conf.sh machinery.
(cherry picked from commit ba35a6df9c)
To count pending queries in the statistics, we need the ns3 to be
misconfigured. Document the fact in the statistics/ns3/root.hints.
(cherry picked from commit 32c2acf6fc)
When the resolver was refactored, the statistics system test had to be
adjusted in c6b4d82557. Unfortunately,
this change had to be done because of an error in the resolver
refactoring where timeout would not retry next server, but keep trying
the same server. As we have now fixed this bug, revert the change to
the test back to the previous state.
(cherry picked from commit b679640950)
[bug] Changes to the RPZ response-policy min-update-interval
and add-soa options now take effect as expected when
named is reconfigured. [GL #3740]
(cherry picked from commit d8a3d328db)
Check that the SOA serial numbers printed when updating a catalog zone
is represented correctly for numbers bigger than 2^31.
(cherry picked from commit de232ab446)
This commit adds a simple check to the 'doth' system test which
ensures that session resumption when Mutual TLS is used works as
expected.
(cherry picked from commit d5d31c6ba1)
Add an options parameter to control what rdatasets are returned when
iteratating over the node. Specific modes will be added later.
(cherry picked from commit 7695c36a5d)
The bad2-dswithdrawn.checkds tests were missing call to the
zone_checks() contributing to intermittent timing failures of the
checkds system test.
(cherry picked from commit 718831bfcc)
when serve-stale is enabled, NXDOMAIN cache entries are no longer
preserved after the normal negative cache TTL, in order to reduce
unnecessary cache memory consumption.
(cherry picked from commit f1485ca145)
Using a restored catalog zone excercised a use-after-free bug.
The test checks that the use-after-free bug is gone and is just
a reasonable behaviour check in its own right.
(cherry picked from commit bca84c8601)
Prime the cache with the following records:
shortttl.cname.example. 1 IN CNAME longttl.target.example.
longttl.target.example. 600 IN A 10.53.0.2
Wait for the CNAME record to expire, disable the authoritative server,
and query 'shortttl.cname.example' again, expecting a stale answer.
(cherry picked from commit 21faf44ef7)
While some of these tests are for DoT which doesn't require nghttp2,
the server configs won't allow the server to start without nghttp2
support during compile time.
It might be possible to split these tests into DoT and DoH and only
require nghttp2 for DoH tests, but since almost all of our CI jobs are
compiled with nghttp2, we wouldn't gain a lot of coverage, so it's
probably not worth the effort.
(cherry picked from commit f514604613)
Avoid using the environment variables for feature detection and use the
feature-test utility instead.
Remove the obsolete environment variables from conf.sh, since they're no
longer used anywhere.
(cherry picked from commit 9730ac4c56)
Previously, there were two different ways to detect feature support.
Either through an environment variable set by configure in conf.sh, or
using the feature-test utility.
It is more simple and consistent to have only one way of detecting the
feature support. Using the feature-test utility seems superior the the
environment variables set by configure.
(cherry picked from commit d24fb1122e)
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
(cherry picked from commit c100308b7d)
Both the catalog zone (catalog-tls.example) the zone managed using
the catalog zone (tls1.example) require TLS and a TSIG for zone
transfers.
(cherry picked from commit bb66ef2a47)
It was possible to set operating system limits (RLIMIT_DATA,
RLIMIT_STACK, RLIMIT_CORE and RLIMIT_NOFILE) from named.conf. It's
better to leave these untouched as setting these is responsibility of
the operating system and/or supervisor.
Deprecate the configuration options and remove them in future BIND 9
release.
(cherry picked from commit 379929e052)
The retry 3 times when checking signatures did not make sense because
at this point the input file does not change.
Raise the number of retries when checking the apex DNSKEY response to
reduce the number of intermittent failures due to unexpected delays.
(cherry picked from commit 6ef0417274)
Create a zone that triggers DNAME owner name checks in a zone that
is only reachable using a dual stack server. The answer contains
a name that is higher in the tree than the query name.
e.g.
foo.v4only.net. CNAME v4only.net.
v4only.net. A 10.0.0.1
ns4 is serving the test zone (ipv4-only)
ns6 is the root server for this test (dual stacked)
ns7 is acting as the dual stack server (dual stacked)
ns9 is the server under test (ipv6-only)
(cherry picked from commit f946133ec9)
Look for $testdir/$server/named.ipv6-only and use
fd92:7065:b8e:ffff::$n instead of 10.53.0.$n to
communicate with the server.
(cherry picked from commit a35c34e10f)
"sha1sum" is part of GNU Coreutils, neither BIND 9 dependency nor POSIX.
Replace it with "openssl sha1 -r" as OpenSSL is BIND 9 dependency.
(cherry picked from commit d34c7ae227)
checkbashisms warns about possible reliance on HOSTNAME environmental
variable which Bash sets to the name of the current host, and some
commands may leverage it:
possible bashism in builtin/tests.sh line 199 ($HOST(TYPE|NAME)):
grep "^\"$HOSTNAME\"$" dig.out.ns1.$n > /dev/null || ret=1
possible bashism in builtin/tests.sh line 221 ($HOST(TYPE|NAME)):
grep "^\"$HOSTNAME\"$" dig.out.ns2.$n > /dev/null || ret=1
possible bashism in builtin/tests.sh line 228 ($HOST(TYPE|NAME)):
grep "^; NSID: .* (\"$HOSTNAME\")$" dig.out.ns2.$n > /dev/null || ret=1
We don't use the variable this way but rename it to HOST_NAME to silence
the tool.
(cherry picked from commit ae33a8ddea)
"next_key_event_threshold" is assigned with
"next_key_event_threshold+i", but "i" is empty (never set, nor used
afterwards).
posh, the Policy-compliant Ordinary SHell, failed on this assignment
with:
tests.sh:253: : unexpected `end of expression'
(cherry picked from commit 00c3b1e309)
checkbashisms gets confused by the rndc command being on two lines:
possible bashism in bin/tests/system/nzd2nzf/tests.sh line 37 (type):
rndccmd 10.53.0.1 addzone "added.example { type primary; file \"added.db\";
(cherry picked from commit 9eb2f6b0e8)
checkbashisms reports Bash-style ("==") string comparisons inside test/[
command:
possible bashism in bin/tests/system/checkconf/tests.sh line 105 (should be 'b = a'):
if [ $? == 0 ]; then echo_i "failed"; ret=1; fi
possible bashism in bin/tests/system/keyfromlabel/tests.sh line 62 (should be 'b = a'):
test $ret == 0 || continue
possible bashism in bin/tests/system/keyfromlabel/tests.sh line 79 (should be 'b = a'):
test $ret == 0 || continue
(cherry picked from commit 7640fc5b39)
The checkbashisms script reports errors like this one:
script util/check-line-length.sh does not appear to have a #! interpreter line;
you may get strange results
(cherry picked from commit 9e68997cbb)
If 'set -x' is in effect file.prev gets populated with debugging output.
To prevent this open descriptor 3 and redirect stderr from the awk
command to descriptor 3. Debugging output will stay directed to stderr.
(cherry picked from commit 10f67938db)
