CookieOption with new .server/.client attributes (rather than .data) was
added to dnspython. Adjust the code to use the new attributes if
available and fall back to the old code for dnspython<2.7.0
compatibility.
(cherry picked from commit 0d90b13646)
In a multi-signer setup, removing DNSKEY records from the zone should
not be treated as a key that previously exists in the keyring, thus
blocking the keymgr. Add a test case to make sure.
(cherry picked from commit 5f552293d7)
Test that if a key to be purged is in the keyring, it does not
prevent the keymgr from running. Normally a key that is in the keyring
should be available again on the next run, but that is not true for
a key that can be purged.
In addition, fix some wait_for_log calls, by adding the missing
'|| ret=1' parts.
(cherry picked from commit a2317425bc)
Some test cases were working but for the wrong reasons. These started
to fail when I implemented the first approach for #4763, where the
existence of a DNSKEY together with an empty keyring is suspicious and
would prevent the keymgr from running.
These are:
1. kasp: The multisigner-model2.kasp zone has ZSKs from other providers
in the zone, but not yet its own keys. Pregenerate signing keys and
add them to the unsigned zone as well.
2. kasp: The dynamic-signed-inline-signing.kasp zone has a key generated
and added in the raw version of the zone. But the key file is stored
outside the key-directory for the given zone. Add '-K keys' to the
dnssec-keygen command.
(cherry picked from commit d1e263ef13)
Prior to running the keymgr, first make sure that existing keys
are present in the new keylist. If not, treat this as an operational
error where the keys are made offline (temporarily), possibly unwanted.
(cherry picked from commit 5fdad05a8a)
In this specific case the key files are temporary unavailable, for
example because of an operator error, or a mount failure). In such
cases, BIND should not try to roll over these keys.
(cherry picked from commit a3afbd9d6f)
This commit ensures that the port is set before attempting a UDP
query. Before that a situation could appear when previous query have
completed over a different transport (that uses a dedicated port) and
then a UDP query will be attempted over the port of the previous
transport.
(cherry picked from commit e390ed4421)
The dns_dispatch_add() function registers the 'resp' entry in
'disp->mgr->qids' hash table with 'resp->port' being 0, but in
tcp_recv_success(), when looking up an entry in the hash table
after a successfully received data the port is used, so if the
local port was set (i.e. it was not 0) it fails to find the
entry and results in an unexpected error.
Set the 'resp->port' to the given local port value extracted from
'disp->local'.
(cherry picked from commit d49a8f518a)
Extends the resolver system test to to check whether responses are
logged to the query log in addition to the queries.
(cherry picked from commit 61415432ec)
Log to the querylog the rcode of a previous query using
the identifier 'response:' to diffenciate queries from
responses.
(cherry picked from commit 5fad79c92f)
Check that with a preexisting dump file without a write permission
no actual dump happens, and rndc returns an error result.
Also add a couple of missing entries in the cleaning script.
(cherry picked from commit 63bddd7192)
The named_server_dumpdb() function, which is called when a 'rndc dumpdb'
command is issued, returns a 'isc_result_t' result code and it has been
always ignored since its introduction in
eb8713ed94, where it was still called
ns_server_dumpdb(). The orignal reasoning is not preserved, but it could
have been also a simple copy-paste mistake, as there are commands, which
return 'void' and require manually setting 'result = ISC_R_SUCCESS;', as
it was done here. Anyway, named will now return the actual result, and
'rndc' will report an error, when the 'dumpdb' command fails.
(cherry picked from commit 8b866ba8a0)
The ans4 server wasn't shutting down cleanly sometimes. Check that
read returns the expected value for the message length or exit read
loop.
(cherry picked from commit 21baad0a8f)
The shutdown system test sends queries when named is shutting down, not
in an attempt to get answers but to destabilize the server into a crash.
With isctest.query.udp() defaulting to try up to ten times with a
ten-second timeout to get a response we don't care about from a likely
terminated server, we make the test run much longer than needed because
of retries and long timeouts.
(cherry picked from commit 463ab2f3f5)
Check that the fix in the previous commit works and that the
'ServerQuota' counter in the statistics channel is still unset
after a SERVFAIL result in a 'forward only' zone.
(cherry picked from commit 81b3c5d908)
Silence Coverity CID 468757 and 468767 (DATA RACE read not locked)
by converting dnssec-signzone to use atomics for statistics counters
rather than using a lock. This should be marginally faster than
using the lock as well when statistics are requested.
(cherry picked from commit 473cbd4e87)
This change allows fallback from an IXFR failure to AXFR when the
reason is DNS_R_TOOMANYRECORDS. This is because this error condition
could be temporary only in an intermediate version of IXFR
transactions and it's possible that the latest version of the zone
doesn't have that condition. In such a case, the secondary would never
be able to update the zone (even if it could) without this fallback.
This fallback behavior is particularly useful with the recently
introduced max-records-per-type and max-types-per-name options:
the primary may not have these limitations and may temporarily
introduce "too many" records, breaking IXFR. If the primary side
subsequently deletes these records, this fallback will help recover
the zone transfer failure automatically; without it, the secondary
side would first need to increase the limit, which requires more
operational overhead and has its own adverse effect.
This change also fixes a minor glitch that DNS_R_TOOMANYRECORDS wasn't
logged in xfrin_fail.
(cherry picked from commit 7289090683)
Administrators may wish to constrain the set of cores that BIND 9 runs
on via the 'taskset', 'cpuset' or 'numactl' programs (or equivalent on
other O/S), for example to achieve higher (or more stable) performance
by more closely associating threads with individual NIC rx queues. If
the admin has used taskset, it follows that BIND ought to
automatically use the given number of CPUs rather than the system wide
count.
Co-Authored-By: Ray Bellis <ray@isc.org>
(cherry picked from commit 5a2df8caf5)
Return partial match from dns_db_find/dns_db_find when requested
to short circuit the closest encloser discover process. Most of the
time this will be the actual closest encloser but may not be when
there yet to be committed / cleaned up versions of the zone with
names below the actual closest encloser.
(cherry picked from commit d42ea08f16)
On systems where root access is needed to configure privileged
ports, we don't want to fully relinquish root privileges until
after the control channel (which typically runs on port 953) has
been established.
named_os_changeuser() now takes a boolean argument 'permanent'.
This allows us to switch the effective userid temporarily with
named_os_changeuser(false) and restore it with named_os_restoreuser(),
before permanently dropping privileges with named_os_changeuser(true).
(cherry picked from commit d57fa148af)
With max-recursion-queries set to 50 the resolver system test was
unstable in the "checking query resolution for a domain with a valid
glueless delegation chain" check as ns1 replied with SERVFAIL.
(cherry picked from commit 8e0244d300)
A new argument has been added to dnssec-keygen and dnssec-keyfromlabel
to restrict the tag value of key generated / imported to a particular
range. This is intended to be used by multi-signers.
Co-authored-by: Suzanne Goldlust <sgoldlust@isc.org>
(cherry picked from commit 0c347fb321)
If there is a keytag conflict between keys with different algorithms,
we need to supply what key algorithm is used so we can get the right
public key.
For clarity, print the algorithm on the found keys after 'check_keys'.
(cherry picked from commit 7bb6d82505)
