On Windows, we were limiting the number of listening children to just 1,
but we were then iterating on mgr->nworkers. That lead to scheduling
more async_*listen() than actually allocated and out-of-bound read-write
operation on the heap.
(cherry picked from commit 87c5867202)
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
(cherry picked from commit 634bdfb16d)
- isc_nm_tcpdnsconnect() sets up up an outgoing TCP DNS connection.
- isc_nm_tcpconnect(), _udpconnect() and _tcpdnsconnect() now take a
timeout argument to ensure connections time out and are correctly
cleaned up on failure.
- isc_nm_read() now supports UDP; it reads a single datagram and then
stops until the next time it's called.
- isc_nm_cancelread() now runs asynchronously to prevent assertion
failure if reading is interrupted by a non-network thread (e.g.
a timeout).
- isc_nm_cancelread() can now apply to UDP sockets.
- added shim code to support UDP connection in versions of libuv
prior to 1.27, when uv_udp_connect() was added
all these functions will be used to support outgoing queries in dig,
xfrin, dispatch, etc.
(cherry picked from commit 5dcdc00b93)
As a leftover from old TCP accept code isc_uv_import passed TCP_SERVER
flag when importing a socket on Windows.
Since now we're importing/exporting accepted connections it needs to
pass TCP_CONNECTION flag.
(cherry picked from commit 801f7af6e9)
We were using our own versions of isc_uv_{export,import} functions
for multithreaded TCP listeners. Upcoming libuv version will
contain proper uv_{export,import} functions - use them if they're
available.
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Add curly braces using uncrustify and then reformat with clang-format back
Closes#46
See merge request isc-projects/bind9!3057
(cherry picked from commit 67b68e06ad)
36c6105e Use coccinelle to add braces to nested single line statement
d14bb713 Add copy of run-clang-tidy that can fixup the filepaths
056e133c Use clang-tidy to add curly braces around one-line statements
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
- isc__netievent_storage_t was to small to contain
isc__netievent__socket_streaminfo_t on Windows
- handle isc_uv_export and isc_uv_import errors properly
- rewrite isc_uv_export and isc_uv_import on Windows
These functions can be used to pass a uv handle between threads in a
safe manner. The other option is to use uv_pipe and pass the uv_handle
via IPC, which is way more complex. uv_export() and uv_import() functions
existed in libuv at some point but were removed later. This code is
based on the original removed code.
The Windows version of the code uses two functions internal to libuv;
a patch for libuv is attached for exporting these functions.
