The udp, tcpdns and tlsdns contained lot of cut&paste code or code that
was very similar making the stack harder to maintain as any change to
one would have to be copied to the the other protocols.
In this commit, we merge the common parts into the common functions
under isc__nm_<foo> namespace and just keep the little differences based
on the socket type.
After the TCPDNS refactoring the initial and idle timers were broken and
only the tcp-initial-timeout was always applied on the whole TCP
connection.
This broke any TCP connection that took longer than tcp-initial-timeout,
most often this would affect large zone AXFRs.
This commit changes the timeout logic in this way:
* On TCP connection accept the tcp-initial-timeout is applied
and the timer is started
* When we are processing and/or sending any DNS message the timer is
stopped
* When we stop processing all DNS messages, the tcp-idle-timeout
is applied and the timer is started again
Although harmless, the memmove() in tlsdns and tcpdns was guarded by a
current message length variable that was always bigger than 0 instead of
correct current buffer length remainder variable.
* Following the example set in 634bdfb16d, the tlsdns netmgr
module now uses libuv and SSL primitives directly, rather than
opening a TLS socket which opens a TCP socket, as the previous
model was difficult to debug. Closes#2335.
* Remove the netmgr tls layer (we will have to re-add it for DoH)
* Add isc_tls API to wrap the OpenSSL SSL_CTX object into libisc
library; move the OpenSSL initialization/deinitialization from dstapi
needed for OpenSSL 1.0.x to the isc_tls_{initialize,destroy}()
* Add couple of new shims needed for OpenSSL 1.0.x
* When LibreSSL is used, require at least version 2.7.0 that
has the best OpenSSL 1.1.x compatibility and auto init/deinit
* Enforce OpenSSL 1.1.x usage on Windows
(cherry picked from commit e493e04c0f)
A typo in macro definition caused the load-balanced sockets to be
disabled even on platforms with existing support for load-balanced
sockets.
(cherry picked from commit 5caf33feda)
On Windows, we were limiting the number of listening children to just 1,
but we were then iterating on mgr->nworkers. That lead to scheduling
more async_*listen() than actually allocated and out-of-bound read-write
operation on the heap.
(cherry picked from commit 87c5867202)
When we were in nmthread, the isc__nm_async_<proto>connect() function
executes in the same thread as the isc__nm_<proto>connect() and on a
failure, it would block indefinitely because the failure branch was
setting sock->active to false before the condition around the wait had a
chance to skip the WAIT().
This also fixes the zero system test being stuck on FreeBSD 11, so we
re-enable the test in the commit.
On platforms without load-balancing socket all the queries would be
handle by a single thread. Currently, the support for load-balanced
sockets is present in Linux with SO_REUSEPORT and FreeBSD 12 with
SO_REUSEPORT_LB.
This commit adds workaround for such platforms that:
1. setups single shared listening socket for all listening nmthreads for
UDP, TCP and TCPDNS netmgr transports
2. Calls uv_udp_bind/uv_tcp_bind on the underlying socket just once and
for rest of the nmthreads only copy the internal libuv flags (should
be just UV_HANDLE_BOUND and optionally UV_HANDLE_IPV6).
3. start reading on UDP socket or listening on TCP socket
The load distribution among the nmthreads is uneven, but it's still
better than utilizing just one thread for processing all the incoming
queries
On FreeBSD, the stack is destroyed more aggressively than on Linux and
that revealed a bug where we were allocating the 16-bit len for the
TCPDNS message on the stack and the buffer got garbled before the
uv_write() sendback was executed. Now, the len is part of the uvreq, so
we can safely pass it to the uv_write() as the req gets destroyed after
the sendcb is executed.
(cherry picked from commit 94afea9325)
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
(cherry picked from commit 634bdfb16d)
When calling the high level netmgr functions, the callback would be
sometimes called synchronously if we catch the failure directly, or
asynchronously if it happens later. The synchronous call to the
callback could create deadlocks as the caller would not expect the
failed callback to be executed directly.
(cherry picked from commit a49d88568f)
This commit adds couple of additional safeguards against running
sends/reads on inactive sockets. The changes was modeled after the
changes we made to netmgr/tcpdns.c
(cherry picked from commit fa424225af)
Parse the configuration of tls objects into SSL_CTX* objects. Listen on
DoT if 'tls' option is setup in listen-on directive. Use DoT/DoH ports
for DoT/DoH.
(cherry picked from commit 38b78f59a0)
Add server-side TLS support to netmgr - that includes moving some of the
isc_nm_ functions from tcp.c to a wrapper in netmgr.c calling a proper
tcp or tls function, and a new isc_nm_listentls() function.
Add DoT support to tcpdns - isc_nm_listentlsdns().
(cherry picked from commit b2ee0e9dc3)
there were two failures during observed in testing, both occurring
when 'rndc halt' was run rather than 'rndc stop' - the latter dumps
zone contents to disk and presumably introduced enough delay to
prevent the races:
- a failure when the zone was shut down and called dns_xfrin_detach()
before the xfrin had finished connecting; the connect timeout
terminated without detaching its handle
- a failure when the tcpdns socket timer fired after the outerhandle
had already been cleared.
this commit incidentally addresses a failure observed in mutexatomic
due to a variable having been initialized incorrectly.
this function sets the read timeout for the socket associated
with a netmgr handle and, if the timer is running, resets it.
for TCPDNS sockets it also sets the read timeout and resets the
timer on the outer TCP socket.
(cherry picked from commit 4be63c5b00)
When we are operating on the tcpdns socket, we need to double check
whether the socket or its outerhandle or its listener or its mgr is
still active and when not, bail out early.
(cherry picked from commit c14c1fdd2c)
If dnslisten_readcb gets a read callback it needs to verify that the
outer socket wasn't closed in the meantime, and issue a CANCELED callback
if it was.
(cherry picked from commit 3ab3d90de0)
- isc_nm_tcpdnsconnect() sets up up an outgoing TCP DNS connection.
- isc_nm_tcpconnect(), _udpconnect() and _tcpdnsconnect() now take a
timeout argument to ensure connections time out and are correctly
cleaned up on failure.
- isc_nm_read() now supports UDP; it reads a single datagram and then
stops until the next time it's called.
- isc_nm_cancelread() now runs asynchronously to prevent assertion
failure if reading is interrupted by a non-network thread (e.g.
a timeout).
- isc_nm_cancelread() can now apply to UDP sockets.
- added shim code to support UDP connection in versions of libuv
prior to 1.27, when uv_udp_connect() was added
all these functions will be used to support outgoing queries in dig,
xfrin, dispatch, etc.
(cherry picked from commit 5dcdc00b93)
If the connection is closed while we're processing the request
we might access TCPDNS outerhandle which is already reset. Check
for this condition and call the callback with ISC_R_CANCELED result.
(cherry picked from commit c41ce8e0c9)
1. The isc__nm_tcp_send() and isc__nm_tcp_read() was not checking
whether the socket was still alive and scheduling reads/sends on
closed socket.
2. The isc_nm_read(), isc_nm_send() and isc_nm_resumeread() have been
changed to always return the error conditions via the callbacks, so
they always succeed. This applies to all protocols (UDP, TCP and
TCPDNS).
(cherry picked from commit f7c82e406e)
If we clone the csock (children socket) in TCP accept_connection()
instead of passing the ssock (server socket) to the call back and
cloning it there we unbreak the assumption that every socket is handled
inside it's own worker thread and therefore we can get rid of (at least)
callback locking.
(cherry picked from commit e8b56acb49)
The isc__nm_tcpdns_stoplistening() would call isc__nmsocket_clearcb()
that would clear the .accept_cb from non-netmgr thread. Change the
tcpdns_stoplistening to enqueue ievent that would get processed in the
right netmgr thread to avoid locking.
(cherry picked from commit d86a74d8a4)
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
(cherry picked from commit 57b4dde974)
- rename isc_nmsocket_t->tcphandle to statichandle
- cancelread functions now take handles instead of sockets
- add a 'client' flag in socket objects, currently unused, to
indicate whether it is to be used as a client or server socket
(cherry picked from commit 7eb4564895)
by having these functions act on netmgr handles instead of socket
objects, they can be used in callback functions outside the netgmr.
(cherry picked from commit 55896df79d)
the blackhole ACL was accidentally disabled with respect to client
queries during the netmgr conversion.
in order to make this work for TCP, it was necessary to add a return
code to the accept callback functions passed to isc_nm_listentcp() and
isc_nm_listentcpdns().
(cherry picked from commit 23c7373d68)
isc__nm_tcpdns_send() was not asynchronous and accessed socket
internal fields in an unsafe manner, which could lead to a race
condition and subsequent crash. Fix it by moving tcpdns processing
to a proper netmgr thread.
(cherry picked from commit 591b79b597)
this prevents a crash when some non-netmgr thread, such as a
recursive lookup, times out after the TCP socket is already
disconnected.
(cherry picked from commit 3704c4fff2)
this will allow recv event handlers to distinguish between cases
in which the region is NULL because of error, shutdown, or cancelation.
(cherry picked from commit 75c985c07f)
A TCPDNS socket creates a handle for each complete DNS message.
Previously, when all the handles were disconnected, the socket
would be closed, but the wrapped TCP socket might still have
more to read.
Now, when a connection is established, the TCPDNS socket creates
a reference to itself by attaching itself to sock->self. This
reference isn't cleared until the connection is closed via
EOF, timeout, or server shutdown. This allows the socket to remain
open even when there are no active handles for it.
(cherry picked from commit cd79b49538)
- isc__nmhandle_get() now attaches to the sock in the nmhandle object.
the caller is responsible for dereferencing the original socket
pointer when necessary.
- tcpdns listener sockets attach sock->outer to the outer tcp listener
socket. tcpdns connected sockets attach sock->outerhandle to the handle
for the tcp connected socket.
- only listener sockets need to be attached/detached directly. connected
sockets should only be accessed and reference-counted via their
associated handles.
(cherry picked from commit 5ea26ee1f1)
there is no need for a caller to reference-count socket objects.
they need tto be able tto close listener sockets (i.e., those
returned by isc_nm_listen{udp,tcp,tcpdns}), and an isc_nmsocket_close()
function has been added for that. other sockets are only accessed via
handles.
(cherry picked from commit 9e740cad21)
The following reverted changes will be picked again as part of the
netmgr sync with main branch.
Revert "Merge branch '1996-confidential-issue-v9_16' into 'security-v9_16'"
This reverts commit e160b1509f, reversing
changes made to c01e643715.
Revert "Merge branch '2038-use-freebind-when-bind-fails-v9_16' into 'v9_16'"
This reverts commit 5f8ecfb918, reversing
changes made to 23021385d5.
Revert "Merge branch '1936-blackhole-fix-v9_16' into 'v9_16'"
This reverts commit f20bc90a72, reversing
changes made to 490016ebf1.
Revert "Merge branch '1938-fix-udp-race' into 'v9_16'"
This reverts commit 0a6c7ab2a9, reversing
changes made to 4ea84740e6.
Revert "Merge branch '1947-fix-tcpdns-race' into 'v9_16'"
This reverts commit 4ea84740e6, reversing
changes made to d761cd576b.
the blackhole ACL was accidentally disabled with respect to client
queries during the netmgr conversion.
in order to make this work for TCP, it was necessary to add a return
code to the accept callback functions passed to isc_nm_listentcp() and
isc_nm_listentcpdns().
(cherry picked from commit 23c7373d68)
isc__nm_tcpdns_send() was not asynchronous and accessed socket
internal fields in an unsafe manner, which could lead to a race
condition and subsequent crash. Fix it by moving the whole tcpdns
processing to a proper netmgr thread.
tcpdns used transport-specific functions to operate on the outer socket.
Use generic ones instead, and select the proper call in netmgr.c.
Make the missing functions (e.g. isc_nm_read) generic and add type-specific
calls (isc__nm_tcp_read). This is the preparation for netmgr TLS layer.
(cherry picked from commit 5fedd21e16)
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
We weren't consistent about who should unreference the handle in
case of network error. Make it consistent so that it's always the
client code responsibility to unreference the handle - either
in the callback or right away if send function failed and the callback
will never be called.
We pass interface as an opaque argument to tcpdns listening socket.
If we stop listening on an interface but still have in-flight connections
the opaque 'interface' is not properly reference counted, and we might
hit a dead memory. We put just a single source of truth in a listening
socket and make the child sockets use that instead of copying the
value from listening socket. We clean the callback when we stop listening.
- the socket stat counters have been moved from socket.h to stats.h.
- isc_nm_t now attaches to the same stats counter group as
isc_socketmgr_t, so that both managers can increment the same
set of statistics
- isc__nmsocket_init() now takes an interface as a paramter so that
the address family can be determined when initializing the socket.
- based on the address family and socket type, a group of statistics
counters will be associated with the socket - for example, UDP4Active
with IPv4 UDP sockets and TCP6Active with IPv6 TCP sockets. note
that no counters are currently associated with TCPDNS sockets; those
stats will be handled by the underlying TCP socket.
- the counters are not actually used by netmgr sockets yet; counter
increment and decrement calls will be added in a later commit.
