When answering queries, don't add data to the additional section if
the answer has more than 13 names in the RDATA. This limits the
number of lookups into the database(s) during a single client query,
reducing query processing load.
Also, don't append any additional data to type=ANY queries. The
answer to ANY is already big enough.
(cherry picked from commit a1982cf1bb)
The code in zone_startload() disables RPZ and CATZ for a zone if
dns_master_loadfile() returns anything other than ISC_R_SUCCESS,
which makes sense, but it's an error because zone_startload() can
also return DNS_R_SEENINCLUDE upon success when the zone had an
$INCLUDE statement.
(cherry picked from commit 3d7a9fba3b)
This is a second attempt to rewrite the GLUE cache to not use per
database version hash table. Instead of keeping a hash table indexed by
the node, use a directly linked list of GLUE records for each
slabheader. This was attempted before, but there was a data race caused
by the fact that the thread cleaning the GLUE records could be slower
than accessing the slab headers again and reinitializing the wait-free
stack.
The improved design builds on the previous design, but adds a new
dns_gluelist structure that has a pointer to the database version.
If a dns_gluelist belonging to a different (old) version is detected, it
is just detached from the slabheader and left for the closeversion() to
clean it up later.
(cherry picked from commit 29bde687b5)
This commit ensures that BIND enables TLS SNI support for outgoing DoT
connections (when possible) in order to improve compatibility with
other DNS server software.
(cherry picked from commit 740292d3ec)
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
(cherry picked from commit 6691a1530d)
The 'remote-servers' named.conf reference conflicts with the standard
term from the glossary. Rename the standard term to server-list to
make the docs build.
(cherry picked from commit 726c9cd73b)
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
(cherry picked from commit 1b2eadb197)
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
(cherry picked from commit b121f02eac)
`shutdown_trigger_close_cb` is not called in the main loop since
queued events in the `loop->async_trigger`, including loop teardown
(shutdown_server) are processed first, before the `uv_close` callback
is executed..
In order to pass the information to the queued events, it is necessary
to set the flag earlier in the process and not wait for the `uv_close`
callback to trigger.
(cherry picked from commit 67e21d94d4)
Add a none parameter to named configuration option `query-source` (respectively `query-source-v6`) which forbid usage of IPv4 (respectively IPv6) addresses when named is doing an upstream query.
Closes#4981 Turning-off upstream IPv6 queries while still listening to downstream queries on IPv6.
Merge branch 'colin/querysource-none' into 'main'
See merge request isc-projects/bind9!9727
Backport of MR !9727
Some changes had to be done to the existing 9.20.x code in order to
make this backport compatible:
- first, the 9.20.x branches support the `port` parameter in
query-source[-v6], where 9.21.x does not. The original changes
depend on things that can't be backported because that would break
`port` support.
- second, the changes remove the optional `address` parameter from the
canonical form. So `query-source address <ip>` is now printed as
`query-source <ip>`. This means that `named-checkconf -p` will now
generate different output if users have `query-source address <ip>` or
`query-source address <ip> port <port>`; it will now generate
`query-source <ip>` or `query-source <ip> port <port>`. This is a
non-breaking change, because the parser has been updated to support
this form as well.
Only call eatline() to skip to the next line if we're not
already at the end of a line when parsing an unknown directive.
We were accidentally skipping the next line when there was only
a single unknown directive on the current line.
(cherry picked from commit eb78ad2080)
Commit af7db89513 as part of #4141 was
supposed to apply the 'max-recursion-queries' quota to validator
queries, but the counter was never actually passed on to
dns_resolver_createfetch(). This has been fixed, and the global query
counter ('max-query-count', per client request) is now also added.
(cherry picked from commit 5b1ae4a948)
Upstream code doesn't do regular releases, so we need to regularly
sync the code from the upstream repository. This is synchronization up
to the commit f8d0513 from Jan 29, 2024.
(cherry picked from commit d14a76e115)
While implementing the global limit 'max-query-count', initially I
thought adding the variable to the resolver structure. But the limit
is per client request so it was moved to the view structure (and
counter in ns_query structure). However, I forgot to remove the
variable from the resolver structure again. This commit fixes that.
(cherry picked from commit 397ca34e34)
The root cause is the fix for CVE-2024-0760 (part 3), which resets
the TCP connection on a failed send. Specifically commit
4b7c61381f stops reading on the socket
because the TCP connection is throttling.
When the tcpdns_send_cb callback thinks about restarting reading
on the socket, this fails because the socket is a client socket.
And nsupdate is a client and is using the same netmgr code.
This commit removes the requirement that the socket must be a server
socket, allowing reading on the socket again after being throttled.
(cherry picked from commit aa24b77d8b)
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
(cherry picked from commit bbc16cc8e6)
In dns_zone_getdnssecsignstats, dns_zone_getrcvquerystats and
dns_zone_getrequeststats attach to the statistics structure.
(cherry picked from commit fb50a71159)
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
(cherry picked from commit d13e94b930)
Commit amended in order to fix usage of isc_log_write (adding dns_lctx
parameter)
Previously, the update policy rules check was moved earlier in the
sequence, and the keep rule match pointers were kept to maintain the
ability to verify maximum records by type.
However, these pointers can become invalid if server reloading
or reconfiguration occurs before update completion. To prevent
this issue, extract the maximum records by type value immediately
during processing and only keep the copy of the values instead of the
full ssurule.
(cherry picked from commit 44a54a29d8)
There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
(cherry picked from commit ee122ba025)
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
(cherry picked from commit b61739836d)
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
(cherry picked from commit 2cb5a6210f)
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
(cherry picked from commit 3262ebd0f3)
DNS_LOGMODULE_RBTDB was simply inappropriate, and this
log message is actually dependent on db implementation
details, so DNS_LOGMODULE_DB would be the best choice.
(cherry picked from commit b0309ee631)
The new log message is emitted when adding or updating an RRset
fails due to exceeding the max-records-per-type limit. The log includes
the owner name and type, corresponding zone name, and the limit value.
It will be emitted on loading a zone file, inbound zone transfer
(both AXFR and IXFR), handling a DDNS update, or updating a cache DB.
It's especially helpful in the case of zone transfer, since the
secondary side doesn't have direct access to the offending zone data.
It could also be used for max-types-per-name, but this change
doesn't implement it yet as it's much less likely to happen
in practice.
(cherry picked from commit 4156995431)
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
(cherry picked from commit a6cce753e2)
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
(cherry picked from commit 99b4f01b33)
The 'dns' variable in dohpath can be in various forms ({?dns},
{dns}, {&dns} etc.). To check for a valid dohpath it ends up
being simpler to just parse the URI template rather than looking
for all the various forms if substring.
(cherry picked from commit af54ef9f5d)
Re-split format strings that had been poorly split by multiple
clang-format runs using different versions of clang-format.
(cherry picked from commit a24d6e1654)
There is a data race between the statistics channel, which uses
`dns_zone_getxfr()` to get a reference to `zone->xfr`, and the creation
of `zone->xfr`, because the latter happens outside of a zone lock.
Split the `dns_xfrin_create()` function into two parts to separate the
zone tranfer startring part from the zone transfer object creation part.
This allows us to attach the new object to a local variable first, then
attach it to `zone->xfr` under a lock, and only then start the transfer.
(cherry picked from commit dbf230650f)
The isc/crypto.h now directly includes the OpenSSL headers (evp.h) and
any application that includes that header also needs to have
OPENSSL_CFLAGS in the Makefile.am. Adjust the required automake files
as needed.
(cherry picked from commit 88103e72d5)
When canceling the ADB find, the lock on the find gets released for
a brief period of time to be locked again inside adbname lock. During
the brief period that the ADB find is unlocked, it can get canceled by
other means removing it from the adbname list which in turn causes
assertion failure due to a double removal from the adbname list.
Recheck if the find->adbname is still valid after acquiring the lock
again and if not just skip the double removal. Additionally, attach to
the adbname as in the worst case, the adbname might also cease to exist
if the scheduler would block this particular thread for a longer period
of time invalidating the lock we are going to acquire and release.
(cherry picked from commit 128e50e1ff)
Ondřej SurýandAndoni Duarte Pintado
Matthijs Mekking
Aram Sargsyan
Artem Boldariev
Michal Nowak
Pavel BřezinaandOndřej Surý
Colin Vidal
Mark Andrews
Alessio Podda
JINMEI TatuyaandMark Andrews
Remi GacogneandMark Andrews