Portion of the digdelv test are skipped on IPv6 due to extra quotes
around $TESTSOCK6: "I:digdelv:IPv6 unavailable; skipping".
Researched by @michal.
Regressed with 351efd8812.
(cherry picked from commit 1b6419f8a7)
EDNS mechanisms only apply to DNS over UDP. Thus, errors encountered
while sending DNS queries over TCP must not influence EDNS timeout
statistics.
(cherry picked from commit fce3c93ea2)
If a TCP connection fails while attempting to send a query to a server,
the fetch context will be restarted without marking the target server as
a bad one. If this happens for a server which:
- was already marked with the DNS_FETCHOPT_EDNS512 flag,
- responds to EDNS queries with the UDP payload size set to 512 bytes,
- does not send response packets larger than 512 bytes,
and the response for the query being sent is larger than 512 byes, then
named will pointlessly alternate between sending UDP queries with EDNS
UDP payload size set to 512 bytes (which are responded to with truncated
answers) and TCP connections until the fetch context retry limit is
reached. Prevent such query loops by marking the server as bad for a
given fetch context if the advertised EDNS UDP payload size for that
server gets reduced to 512 bytes and it is impossible to reach it using
TCP.
(cherry picked from commit 6cd115994e)
The libidn2 library on Ubuntu Bionic is broken and idn2_to_unicode_8zlz() does't
fail when it should. This commit ensures that we don't run the system test for
valid A-label in locale that cannot display with the buggy libidn2 as it would
break the tests.
(cherry picked from commit c42e3583f9)
Make sure the CYGWIN environment variable is set whenever system tests
are run on Windows to prevent stop.pl from making incorrect assumptions
about the environment it is running in, which triggers e.g. false
reports about named instances crashing on shutdown when system tests are
run on Windows. This issue has not been caught earlier because the
CYGWIN environment variable was incidentally being set on a higher level
in our Windows test environments.
Error reporting for parallel system tests on Windows has been broken all
along: since all parallel.mk targets generated by parallel.sh pipe their
output through "tee", the return code from run.sh is lost and thus
running "make -f parallel.mk check" will not yield a non-zero return
code if some system tests fail. The same applies to runsequential.sh.
Yet, runall.sh on Windows only sets its return code to a non-zero value
if either "make -f parallel.mk check" or runsequential.sh returns a
non-zero return code. Fix by making runall.sh yield a non-zero return
code when testsummary.sh fails, which is the same approach as the one
used in the "test" target in bin/tests/system/Makefile.
(cherry picked from commit fed397c04b)
Until now, the build process for BIND on Windows involved upgrading the
solution file to the version of Visual Studio used on the build host.
Unfortunately, the executable used for that (devenv.exe) is not part of
Visual Studio Build Tools and thus there is no clean way to make that
executable part of a Windows Server container.
Luckily, the solution upgrade process boils down to just adding XML tags
to Visual Studio project files and modifying certain XML attributes - in
files which we pregenerate anyway using win32utils/Configure. Thus,
extend win32utils/Configure with three new command line parameters that
enable it to mimic what "devenv.exe bind9.sln /upgrade" does. This
makes the devenv.exe build step redundant and thus facilitates building
BIND in Windows Server containers.
(cherry picked from commit 0476e8f1ac)
Add a helper shell function, rndc_dumpdb(), which provides a convenient
way to call "rndc dumpdb" for a given server with optional additional
arguments. Since database dumping is an asynchronous process, the
function waits until the dump is complete before returning, which
prevents false positives in system tests caused by inspecting the dump
before its preparation is finished. The function also renames the dump
file before returning so that it does not get overwritten by subsequent
calls; this retains forensic data in case of an unexpected test failure.
(cherry picked from commit ab78e350dd)
Multiple resolvers in the "wildcard" system test are configured with a
single root hint: "ns.root-servers.nil", pointing to 10.53.0.1, which is
inconsistent with authoritative data served by ns1. This may cause
intermittent resolution failures, triggering false positives for the
"wildcard" system test. Prevent this from happening by making ns2, ns3,
and ns5 use root hints corresponding to the contents of ns1/root.db.in.
(cherry picked from commit dd430c3093)
The ns2 named instance in the "staticstub" system test is configured
with a single root hint commonly used in BIND system tests
(a.root-servers.nil with an address of 10.53.0.1), which is inconsistent
with authoritative data served by ns1. This may cause intermittent
resolution failures, triggering false positives for the "staticstub"
system test. Prevent this from happening by making ns1 serve data
corresponding to the contents of bin/tests/system/common/root.hint.
(cherry picked from commit 4b5e1da0e3)
Appending output of a command to the same file as the one that command
is reading from is a dangerous practice. It seems to have accidentally
worked with all the awk implementations we have tested against so far,
but for BusyBox awk, doing this may result in the input/output file
being written to in an infinite loop. Prevent this from happening by
redirect awk output to a temporary file and appending its contents to
the original file in a separate shell pipeline.
(cherry picked from commit bb9c1654e2)
The Net::DNS Perl module needs the Digest::HMAC module to support TSIG.
However, since the latter is not a hard requirement for the former, some
packagers do not make Net::DNS depend on Digest::HMAC. If Net::DNS is
installed on a host but Digest::HMAC is not, the "xfer" system test
breaks in a very hard-to-debug way (ans5 returns TSIG RRs with empty
RDATA, which prevents TSIG-signed SOA queries and transfers from
working). Prevent this from happening by making the "xfer" system test
explicitly require Digest::HMAC apart from Net::DNS.
(cherry picked from commit b10d28d1e0)
The BusyBox version of awk treats some variables which other awk
implementations consider to be decimal values as octal values. This
intermittently breaks key event interval calculations in the "autosign"
system test, trigger false positives for it. Prevent the problem from
happening by stripping leading zeros from the affected awk variables.
(cherry picked from commit ad008f7dbf)
Resolvers in the "filter-aaaa" system test are configured with a single
root hint: "ns.rootservers.net", pointing to 10.53.0.1. However,
querying ns1 for "ns.rootservers.net" results in NXDOMAIN answers.
Since the TTL for the root hint is set to 0, it may happen that a
resolver's ADB will be asked to return any known addresses for
"ns.rootservers.net", but it will only have access to a cached NXDOMAIN
answer for that name and an expired root hint, which will result in a
resolution failure, triggering a false positive for the "filter-aaaa"
system test. Prevent this from happening by making all the root hints
consistent with authoritative data served by ns1.
(cherry picked from commit c19ebde14b)
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4. The change doesn't make the SipHash 2-4 to be the default algorithm, this
is up to the operator.
(cherry picked from commit 196b342bc9)
On DragonFly BSD, use the same commands for configuring network
interfaces used during system tests as on NetBSD and OpenBSD.
(cherry picked from commit 496397eb3f)
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
(cherry picked from commit fea6b5bf10)
(cherry picked from commit 6a7e805796)
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
(cherry picked from commit 7d6eaad1bd)
When printing a packet, dnstap-read checks whether its text form takes
up more than the 2048 bytes allocated for the output buffer by default.
If that is the case, the output buffer is automatically expanded, but
the truncated output is left in the buffer, resulting in malformed data
being printed. Clear the output buffer before expanding it to prevent
this issue from occurring.
(cherry picked from commit 3549abe81d)
Ondřej Surý
Michal Nowak
Michał Kępień
Mark Andrews
Petr MenšíkandOndřej Surý
Evan Hunt