The kasp system test is timing critical. The test passes on all
Linux based machines, but fails frequently on Windows. The test
takes a lot more time on Windows and at the final checks fail
because the expected next key event is too far off. For example:
I:kasp:check next key event for zone step2.algorithm-roll.kasp (570)
I:kasp:error: bad next key event time 20909 for zone \
step2.algorithm-roll.kasp (expect 21600)
I:kasp:failed
This is because the kasp system test calculates the time when the
next key event should occur based on the policy. This assumes that
named is able to do key management within a minute. But starting,
named, doing key management for other zones, and reconfiguring takes
much more time on Windows and thus the next key event on Windows is
much shorter than anticipated.
That this happens is a good thing because this means that the
correct next key event is used, but is not so nice for testing, as
it is hard to determine how much time named needed before finishing
the current key event.
Disable the kasp test on Windows now because it is blocking the
release. We know the cause of these test failures, and it is clear
that this is a fault in the test, not the code. Therefore we feel
comfortable disabling the test right now and work on a fix while
unblocking the release.
(cherry picked from commit 4e610b7f6b)
When configuring the same dnssec-policy for two zones with the same
name but in different views, there is a race condition for who will
run the keymgr first. If running sequential only one set of keys will
be created, if running parallel two set of keys will be created.
Lock the kasp when running looking for keys and running the key
manager. This way, for the same zone in different views only one
keyset will be created.
The dnssec-policy does not implement sharing keys between different
zones.
(cherry picked from commit e0bdff7ecd)
The test case for zsk-retired was missing the actual checks. Add
them and fix the set_policy call to expect three keys.
(cherry picked from commit 2e4b55de85)
Some comments started with a lowercased letter. Capitalized them to
be more consistent with the rest of the comments.
Add some newlines between `set_*` calls and check calls, also to be
more consistent with the other test cases.
(cherry picked from commit 7e54dd74f9)
We may be checking the algorithm steps too fast: the reconfig
command may still be in progress. Make sure the zones are signed
and loaded by digging the NSEC records for these zones.
(cherry picked from commit d16520532f)
Add a test case for algorithm rollover. This is triggered by
changing the dnssec-policy. A new nameserver ns6 is introduced
for tests related to dnssec-policy changes.
This requires a slight change in check_next_key_event to only
check the last occurrence. Also, change the debug log message in
lib/dns/zone.c to deal with checks when no next scheduled key event
exists (and default to loadkeys interval 3600).
(cherry picked from commit 88ebe9581b)
The zone 'step6.ksk-doubleksk.autosign' is configured but is not
set up nor tested. Remove the unneeded configured zone.
(cherry picked from commit cc2afe853b)
Algorithm rollover will require four keys so introduce KEY4.
Also it requires to look at key files for multiple algorithms so
change getting key ids to be algorithm rollover agnostic (adjusting
count checks). The algorithm will be verified in check_key so
relaxing 'get_keyids' is fine.
Replace '${_alg_num}' with '$(key_get KEY[1-4] ALG_NUM)' in checks
to deal with multiple algorithms.
(cherry picked from commit 00ced2d2e7)
There is a failure mode which gets triggered on heavily loaded
systems. A key change is scheduled in 5 seconds to make ZSK2 inactive
and ZSK3 active, but `named` takes more than 5 seconds to progress
from `rndc loadkeys` to the query check. At this time the SOA RRset
is already signed by the new ZSK which is not expected to be active
at that point yet.
Split up the checks to test the case where RRsets are signed
correctly with the offline KSK (maintained the signature) and
the active ZSK. First run, RRsets should be signed with the still
active ZSK2, second run RRsets should be signed with the new active
ZSK3.
(cherry picked from commit aebb2aaa0f)
- Define the SLOT environment variable before starting the test. This
variable defaults to 0 and that does not work with SoftHSM 2.
- The system test expects the PIN environment variable to be set to
"1234" while bin/tests/prepare-softhsm2.sh sets it to "0000".
Update bin/tests/prepare-softhsm2.sh so that it sets the PIN to
"1234".
- Move contents of bin/tests/system/pkcs11/prereq.sh to
bin/tests/system/pkcs11/setup.sh as the former was creating a file
called "supported" that was getting removed by the latter before
bin/tests/system/pkcs11/tests.sh could access it.
- Fix typo in "have_ecx".
(cherry picked from commit 100a230e80f01a777b917b135b4bae9a4ac0e8ae)
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
(cherry picked from commit fc967ba092)
sending each group of queries simultaneously, and then checking the
output after the last one finishes, reduces the runtime of the
serve-stale test by about six minutes.
(cherry picked from commit 195d25b222)
"yes" and "no" are permissible synonyms for "on" and "off", which
use exactly the same code paths. making sure they work isn't a good
use of 80 seconds of test time.
(cherry picked from commit 027601cd3e)
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Add curly braces using uncrustify and then reformat with clang-format back
Closes#46
See merge request isc-projects/bind9!3057
(cherry picked from commit 67b68e06ad)
36c6105e Use coccinelle to add braces to nested single line statement
d14bb713 Add copy of run-clang-tidy that can fixup the filepaths
056e133c Use clang-tidy to add curly braces around one-line statements
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
Also disable the semantic patch as the code needs tweaks here and there because
some destroy functions might not destroy the object and return early if the
object is still in use.
On OpenBSD, the bin/tests/system/pipelined/ans5/ans.py script does not
shut down when it is sent the SIGTERM signal. What seems to be
happening is that starting the UDP listening thread somehow makes the
accept() calls in the script's main thread uninterruptible and thus the
SIGTERM signal sent to the main thread does not get processed until a
TCP connection is established with the script's TCP socket. Work around
the issue by setting a timeout for operations performed on the script's
TCP socket, so that each accept() call in the main thread's infinite
loop returns after at most 1 second, allowing termination signals sent
to the script to be processed.
The key-directory keyword actually does nothing right now but may
be useful in the future if we want to differentiate between key
directories or HSM keys, or if we want to speficy different
directories for different keys or policies. Make it optional for
the time being.
The keyword 'unlimited' can be used instead of PT0S which means the
same but is more comprehensible for users.
Also fix some redundant "none" parameters in the kasp test.
Add checks to the kasp system test to verify CDNSKEY publication.
This test is not entirely complete, because when there is a CDNSKEY
available but there should not be one for KEY N, it is hard to tell
whether the existing CDNSKEY actually belongs to KEY N or another
key.
The check works if we expect a CDNSKEY although we cannot guarantee
that the CDNSKEY is correct: The test verifies existence, not
correctness of the record.
