Add a new built-in policy "insecure", to be used to gracefully unsign
a zone. Previously you could just remove the 'dnssec-policy'
configuration from your zone statement, or remove it.
The built-in policy "none" (or not configured) now actually means
no DNSSEC maintenance for the corresponding zone. So if you
immediately reconfigure your zone from whatever policy to "none",
your zone will temporarily be seen as bogus by validating resolvers.
This means we can remove the functions 'dns_zone_use_kasp()' and
'dns_zone_secure_to_insecure()' again. We also no longer have to
check for the existence of key state files to figure out if a zone
is transitioning to insecure.
(cherry picked from commit 2710d9a11d)
The BIND 9 libraries are considered to be internal only and hence the
API and ABI changes a lot. Keeping track of the API/ABI changes takes
time and it's a complicated matter as the safest way to make everything
stable would be to bump any library in the dependency chain as in theory
if libns links with libdns, and a binary links with both, and we bump
the libdns SOVERSION, but not the libns SOVERSION, the old libns might
be loaded by binary pulling old libdns together with new libdns loaded
by the binary. The situation gets even more complicated with loading
the plugins that have been compiled with few versions old BIND 9
libraries and then dynamically loaded into the named.
We are picking the safest option possible and usable for internal
libraries - instead of using -version-info that has only a weak link to
BIND 9 version number, we are using -release libtool option that will
embed the corresponding BIND 9 version number into the library name.
That means that instead of libisc.so.1608 (as an example) the library
will now be named libisc-9.16.10.so.
(cherry picked from commit c605d75ea5)
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
(cherry picked from commit f619708bbf)
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
(cherry picked from commit 16e14353b1)
Configure "none" as a builtin policy. Change the 'cfg_kasp_fromconfig'
api so that the 'name' will determine what policy needs to be
configured.
When transitioning a zone from secure to insecure, there will be
cases when a zone with no DNSSEC policy (dnssec-policy none) should
be using KASP. When there are key state files available, this is an
indication that the zone once was DNSSEC signed but is reconfigured
to become insecure.
If we would not run the keymgr, named would abruptly remove the
DNSSEC records from the zone, making the zone bogus. Therefore,
change the code such that a zone will use kasp if there is a valid
dnssec-policy configured, or if there are state files available.
(cherry picked from commit cf420b2af0)
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
RFC 8767 recommends that attempts to refresh to be done no more
frequently than every 30 seconds.
Added check into named-checkconf, which will warn if values below the
default are found in configuration.
BIND will also log the warning during loading of configuration in the
same fashion.
these keywords were added to the parser as synonyms for "master"
and "slave" but were never hooked in to the configuration of named,
so they were ignored. this has been fixed and the option is now
checked for correctness.
(cherry picked from commit ba31b189b4)
Originally, every library and binaries got linked to everything, which
creates unnecessary overlinking. This wasn't as straightforward as it
should be as we still support configuration without libtool for 9.16.
Couple of smaller issues related to include headers and an issue where
sanitizer overload dlopen and dlclose symbols, so we were getting false
negatives in the autoconf test.
When dnssec-policy was introduced, it implicitly set inline-signing.
But DNSSEC maintenance required either inline-signing to be enabled,
or a dynamic zone. In other words, not in all cases you want to
DNSSEC maintain your zone with inline-signing.
Change the behavior and determine whether inline-signing is
required: if the zone is dynamic, don't use inline-signing,
otherwise implicitly set it.
You can also explicitly set inline-signing to yes with dnssec-policy,
the restriction that both inline-signing and dnssec-policy cannot
be set at the same time is now lifted.
However, 'inline-signing no;' on a non-dynamic zone with a
dnssec-policy is not possible.
(cherry picked from commit 644f0d958a)
All our MSVS Project files share the same intermediate directory. We
know that this doesn't cause any problems, so we can just disable the
detection in the project files.
Example of the warning:
warning MSB8028: The intermediate directory (.\Release\) contains files shared from another project (dnssectool.vcxproj). This can lead to incorrect clean and rebuild behavior.
(cherry picked from commit b6c2012d93)
Our vcxproj files set the WarningLevel to Level3, which is too verbose
for a code that needs to be portable. That basically leads to ignoring
all the errors that MSVC produces. This commits downgrades the
WarningLevel to Level1 and enables treating warnings as errors for
Release builds. For the Debug builds the WarningLevel got upgraded to
Level4, and treating warnings as errors is explicitly disabled.
We should eventually make the code clean of all MSVC warnings, but it's
a long way to go for Level4, so it's more reasonable to start at Level1.
For reference[1], these are the warning levels as described by MSVC
documentation:
* /W0 suppresses all warnings. It's equivalent to /w.
* /W1 displays level 1 (severe) warnings. /W1 is the default setting
in the command-line compiler.
* /W2 displays level 1 and level 2 (significant) warnings.
* /W3 displays level 1, level 2, and level 3 (production quality)
warnings. /W3 is the default setting in the IDE.
* /W4 displays level 1, level 2, and level 3 warnings, and all level 4
(informational) warnings that aren't off by default. We recommend
that you use this option to provide lint-like warnings. For a new
project, it may be best to use /W4 in all compilations. This option
helps ensure the fewest possible hard-to-find code defects.
* /Wall displays all warnings displayed by /W4 and all other warnings
that /W4 doesn't include — for example, warnings that are off by
default.
* /WX treats all compiler warnings as errors. For a new project, it
may be best to use /WX in all compilations; resolving all warnings
ensures the fewest possible hard-to-find code defects.
1. https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level?view=vs-2019
(cherry picked from commit 789d253e3d)
Updated version and CHANGES files with new release number.
Check the API files:
- lib/bind9/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/dns/api:
Function dns_acl_match changed, struct dns_badcache changed,
function dns_badcache_add changed, function dns_clent_startupdate
changed, struct dns_compress changed, struct dns_resolver changed,
rwlock size changed. This means a LIBINTERFACE increment.
- lib/irs/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/isc/api:
The structs isc__networker and isc_nmsocket changed. This means
increment LIBINTERFACE. The functions isc_uv_export and
isc_uv_import are removed, so LIBAGE must beq zero.
- lib/isccc/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/isccfg/api:
Source code changes, but no interface changes: increment
LIBREVISION.
- lib/ns/api:
Function ns_clientmgr_create, ns_interfacemgr_create, and
structs ns_clientmgr, ns_interface, ns_interfacemgr changed:
increment LIBINTERFACE.
No need to update README or release notes.
Updated CHANGES: Add GitLab MR reference to entry 5357. Remove
merge conflict gone wrong ("max-ixfr-ratio" is not in 9.16).
Add /util/check-make-install.in to .gitattributes.
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
(cherry picked from commit fc967ba092)
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Add curly braces using uncrustify and then reformat with clang-format back
Closes#46
See merge request isc-projects/bind9!3057
(cherry picked from commit 67b68e06ad)
36c6105e Use coccinelle to add braces to nested single line statement
d14bb713 Add copy of run-clang-tidy that can fixup the filepaths
056e133c Use clang-tidy to add curly braces around one-line statements
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
This commit makes some minor changes to the trust anchor code:
1. Replace the undescriptive n1, n2 and n3 identifiers with slightly
better rdata1, rdata2, and rdata3.
2. Fix an occurrence where in the error log message a static number
32 was printed, rather than the rdata3 length.
3. Add a default case to the switch statement checking DS digest
algorithms to catch unknown algorithms.
'dnssec-policy' can now also be set on the options and view level and
a zone that does not set 'dnssec-policy' explicitly will inherit it
from the view or options level.
This requires a new keyword to be introduced: 'none'. If set to
'none' the zone will not be DNSSEC maintained, in other words it will
stay unsigned. You can use this to break the inheritance. Of course
you can also break the inheritance by referring to a different
policy.
The keywords 'default' and 'none' are not allowed when configuring
your own dnssec-policy statement.
Add appropriate tests for checking the configuration (checkconf)
and add tests to the kasp system test to verify the inheritance
works.
Edit the kasp system test such that it can deal with unsigned zones
and views (so setting a TSIG on the query).
This commit introduces the initial `dnssec-policy` configuration
statement. It has an initial set of options to deal with signature
and key maintenance.
Add some checks to ensure that dnssec-policy is configured at the
right locations, and that policies referenced to in zone statements
actually exist.
Add some checks that when a user adds the new `dnssec-policy`
configuration, it will no longer contain existing DNSSEC
configuration options. Specifically: `inline-signing`,
`auto-dnssec`, `dnssec-dnskey-kskonly`, `dnssec-secure-to-insecure`,
`update-check-ksk`, `dnssec-update-mode`, `dnskey-sig-validity`,
and `sig-validity-interval`.
Test a good kasp configuration, and some bad configurations.
The ttlval configuration types are replaced by duration configuration
types. The duration is an ISO 8601 duration that is going to be used
for DNSSEC key timings such as key lifetimes, signature resign
intervals and refresh periods, etc. But it is also still allowed to
use the BIND ttlval ways of configuring intervals (number plus
optional unit).
A duration is stored as an array of 7 different time parts.
A duration can either be expressed in weeks, or in a combination of
the other datetime indicators.
Add several unit tests to ensure the correct value is parsed given
different string values.
