Change the way arithmetic operations are performed in system test shell
scripts from using `expr` to `$(())`. This ensures that updating the
variable won't end up with a non-zero exit code, which would case the
script to exit prematurely when `set -e` is in effect.
The following replacements were performed using sed in all text files
(git grep -Il '' | xargs sed -i):
s/status=`expr $status + $ret`/status=$((status + ret))/g
s/n=`expr $n + 1`/n=$((n + 1))/g
s/t=`expr $t + 1`/t=$((t + 1))/g
s/status=`expr $status + 1`/status=$((status + 1))/g
s/try=`expr $try + 1`/try=$((try + 1))/g
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
Add this test scenario for a bug fixed a while ago. When a third key is
introduced while the previous rollover hasn't finished yet, the keymgr
could decide to remove the first two keys, because it was not checking
for an indirect dependency on the keys.
In other words, the previous bug behavior was that the first two keys
were removed from the zone too soon.
This test case checks that all three keys stay in the zone, and no keys
are removed premature after another new key has been introduced.
In the kasp script, if one expected key is not found, continue checking
the other key ids, even if there is no match for the first one. This
provides a bit more information which keys mismatch and makes for
easier debugging test failures.
Pass 5 second timeout to the rndc status command(s) to avoid hitting the
hard 10 second timeout from subprocess.call, which would result in an
unwanted exception that would only mask the real issue: if the rndc
status times out in this test, it is likely due to the server not
stopping as it should.
The shutdown test attempts to shut down the server using two different
methods - rndc and sigterm. Use pytest.mark.parametrize to run these as
separate test cases for easier identification of failures.
Surround the variables which are checked whether they're executable in
double quotes. Without them, empty paths won't be properly interpreted
as not executable.
Since delv can occasionally hang in system tests when running with TSAN
(see GL#4119), disable these tests as a workaround. Otherwise, the hung
delv process will just waste CI resources and prevent any meaningful
output from the rest of the test suite.
tsig-keygen is now used to generate key files for TSIG. These have
a different format to those that were generated by dnssec-keygen.
Test that dig can still read these files.
tsig-keygen generates key files that are different to those that
where generated by dnssec-keygen. Check that nsupdate can still
read those old format files.
The ability to read legacy HMAC-MD5 K* keyfile pairs using algorithm
number 157 was accidentally lost when the algorithm numbers were
consolidated into a single block, in commit
09f7e0607a.
The assumption was that these algorithm numbers were only known
internally, but they were also used in key files. But since HMAC-MD5
got renumbered from 157 to 160, legacy HMAC-MD5 key files no longer
work.
Move HMAC-MD5 back to 157 and GSSAPI back to 160. Add exception for
GSSAPI to list_hmac_algorithms.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
Previously, the first check silently failed, as 454 is apparently (in my
local setup) the minimum output size for the dnstap output, rather than
470 which the test was expecting. Effectively, the check served as a 5
second sleep rather than waiting for the proper file size.
Additionally, check the expected file sizes and fail if expectations
aren't met.
The log message is supposed to contain the zone name which was
erroneously omitted, but didn't pop up during tests, since return code
was silently ignored.
Now it actually waits for the proper log message rather than being an
equivalent of 3 second sleep (which was also sufficient to make the test
pass, thus we detected no failure).
In HTTP/1.0 and HTTP/1.1, RFC 9112 section 9.6 says the last response
in a connection should include a `Connection: close` header, but the
statschannel server omitted it.
In an HTTP/1.0 response, the statschannel server can sometimes send a
`Connection: keep-alive` header when it is about to close the
connection. There are two ways:
If the first request on a connection is keep-alive and the second
request is not, then _both_ responses have `Connection: keep-alive`
but the connection is (correctly) closed after the second response.
If a single request contains
Connection: close
Connection: keep-alive
then RFC 9112 section 9.3 says the keep-alive header is ignored, but
the statschannel sends a spurious keep-alive in its response, though
it correctly closes the connection.
To fix these bugs, make it more clear that the `httpd->flags` are part
of the per-request-response state. The Connection: flags are now
described in terms of the effect they have instead of what causes them
to be set.
The "dns_dnssec_findzonekeys2" log message is a leftover from when that
was the name of the function. Rename to match the current name of the
function.
When we add DNSKEY records via dynamic update, this should no longer
trigger signing the zone with these keys. This currently happens when
'find_zone_keys()' looks up the keys by inspecting the DNSKEY RRset,
then attempting to read the corresponding key files.
Add checks that inspect the logs whether an attempt to read the key
files for the newly added keys was done (and failed because these files
are not available).
The purpose of the check is to verify the server has survived the
previous barrage of queries. This is done by sending a query and
checking we get a NOERROR response back.
Previously, that query could've been affected by a servfail cache - the
server would return a SERVFAIL answer, thus failing the check, despite
being up and running. Use version.bind txt ch query to avoid the
interference of servfail cache.
Prepare the fetchlimit system test for adding a clients-per-query
check. Change some functions and commands to accept a destination
NS IP address instead of using the hardcoded 10.53.0.3.
