Cleanup the remnants of MS Compiler bits from <isc/refcount.h>, printing
the information in named/main.c, and cleanup some comments about Windows
that no longer apply.
The bits in picohttpparser.{h,c} were left out, because it's not our
code.
hypothesis prior to 4.41.2 uses hashlib.md5 which is not FIPS
compliant causing the wildcard system test to fail. Check if
we are running if FIPS mode and if so make the minimum version
of hypothesis we will accept to be 4.41.2.
The existing set of kerberos credential used deprecated algorithms
which are not supported by some implementations in FIPS mode.
Regenerate the saved credentials using more modern algorithms.
Added tsiggss/krb/setup.sh which sets up a test KDC with the required
principals for the system test to work. The tsiggss system test
needs to be run once with this active and KRB5_CONFIG appropriately.
set. See tsiggss/tests.sh for an example of how to do this.
OPENSSL_CONF="" is treated differently to no OPENSSL_CONF in
the environment by OpenSSL. OPENSSL_CONF="" lead to crypto
failure being reported in FIPS mode.
Call dst_lib_init to set FIPS mode if it was turned on at configure
time.
Check that named-checkconf report that dnssec policies that wont
work in FIPS mode are reported if named would be running in FIPS
mode.
Diffie-Hellman key echange doesn't appear to work in FIPS mode for
OpenSSL 1.x.x. Add feature test (--have-fips-dh) to identify builds
where DH key exchanges work (non FIPS builds and OpenSSL 3.0.0+) and
exclude test that would otherwise fail.
- RSASHA1 (5) and NSEC3RSASHA1 (7) are not accepted in FIPS mode
- minimum RSA key size is set to 2048 bit
adjust kasp and checkconf system tests to ensure non FIPS
compliant configurations are not used in FIPS mode
Instead of marking the unused entities with UNUSED(x) macro in the
function body, use a `ISC_ATTR_UNUSED` attribute macro that expans to
C23 [[maybe_unused]] or __attribute__((__unused__)) as fallback.
when testing the DNSRPS API, instead of linking to an installed
librpz.so from fastrpz, we now link to the test library. code that
ran dnsrpzd and checked the fastrpz license is now unnecessary and
has been removed.
two dnsrps-specific test cases in rpz (qname_as_ns and ip_as_ns) have
been removed, because they were only supported by fastrpz and do not
work in the test library. in rpzrecurse, nsip-wait-recurse and
nsdname-wait-recurse are now only tested in native mode, due to those
tests being specific to the native implementation.
These options and zone type were created to address the
SiteFinder controversy, in which certain TLD's redirected queries
rather than returning NXDOMAIN. since TLD's are now DNSSEC-signed,
this is no longer likely to be a problem.
The deprecation message for 'type delegation-only' is issued from
the configuration checker rather than the parser. therefore,
isccfg_check_namedconf() has been modified to take a 'nodeprecate'
parameter to suppress the warning when named-checkconf is used with
the command-line option to ignore warnings on deprecated options (-i).
Previously, an AXFR request would be issued every second while waiting
for the zone to be signed. This might've been the cause of issues in CI
where many tests are running in parallel and any extra load may increase
test instability.
Instead, check for the last NSEC record to have a signature before
commencing the AXFR request to check the zone has been fully signed.
Also increase the time for the zone signing to a total of 60+10 seconds
up from the previous 30.
Ensure messages from dupsigs system test end up in its log rather than
stdout. Previously, the output was hard to debug when running the tests
in parallel and messages wouldn't end up in the dupsigs.log.
stop and restart the server in the 'tsiggss' test, in order
to confirm that GSS negotiated TSIG keys are saved and restored
when named loads.
added logging to dns_tsigkey_createfromkey() to indicate whether
a key has been statically configured, generated via GSS negotiation,
or restored from a file.
If the zone already has existing NSEC/NSEC3 chains then zone_sign
needs to continue to use them. If there are no chains then use
kasp setting otherwise generate an NSEC chain.
The dnstap system test fails intermittently, and it appears to be
a timing issue - adding a short delay after running 'fstrm_capture',
and before running 'dnstap -reopen' improves the situation from
50% failures (5 out of 10 times) to 0% failures (0 out of 20 times),
tested locally.
The reason is that 'fstrm_capture' is executed in the background,
and due to OS scheduling and other factors, the listener socket
may not be ready when the following command runs and tells 'named'
to (re)open it.
Dumping of the freshly transferred zone file can take some time.
Retry 5 times before failing.
The log excerpt below shows such a case, when dumping lasted more than
two seconds.
06-Mar-2023 09:32:09.973 zone example6/IN: Transfer started.
06-Mar-2023 09:32:10.301 zone example6/IN: zone transfer finished: success
06-Mar-2023 09:32:10.301 zone_dump: zone example6/IN: enter
06-Mar-2023 09:32:11.789 client @0x7fe9ab435d68 10.53.0.10#44113 (example6): AXFR request
06-Mar-2023 09:32:11.801 client @0x7fe9ab435d68 10.53.0.10#44113 (example6): transfer of 'example6/IN': AXFR ended: 5 messages, 2676 records, 55815 bytes, 0.011 secs (5074090 bytes/sec) (serial 1397051952)
06-Mar-2023 09:32:12.409 zone_gotwritehandle: zone example6/IN: enter
06-Mar-2023 09:32:12.421 dump_done: zone example6/IN: enter
06-Mar-2023 09:32:12.421 zone_journal_compact: zone example6/IN: target journal size 53044
There can be comments in dig output for a zone transfer only in case
of an error, so we should print those errors not when wait_for_tls_xfer
succeeds, but when it fails.
Also, there is no point in printing those comments when a failure was
indeed expected.
The serve-stale system test was intermittently failing due to a timing
issue:
I:serve-stale:check stale data.example TXT was refreshed...
I:serve-stale:failed
The RRset is refreshed, however, it first checks for an expected log
line, prior checking that the stale data.example TXT was refreshed
(using dig). This log line is there to ensure the record is actually
refreshed before we start querying again. Alternatively we could just
retry_quiet 10 <wait for dig output matches expectations>. It would
lower the chances for intermittent test failures, since there is no
longer a "check for log line, sleep one second if check fails, check
for log line, ...", prior to the check.
