We introduce a isc_quota_attach_cb function - if ISC_R_QUOTA is returned
at the time the function is called, then a callback will be called when
there's quota available (with quota already attached). The callbacks are
organized as a LIFO queue in the quota structure.
It's needed for TCP client quota - with old networking code we had one
single place where tcp clients quota was processed so we could resume
accepting when the we had spare slots, but it's gone with netmgr - now
we need to notify the listener/accepter that there's quota available so
that it can resume accepting.
Remove unused isc_quota_force() function.
The isc_quote_reserve and isc_quota_release were used only internally
from the quota.c and the tests. We should not expose API we are not
using.
(cherry picked from commit d151a10f30)
The kasp system test is timing critical. The test passes on all
Linux based machines, but fails frequently on Windows. The test
takes a lot more time on Windows and at the final checks fail
because the expected next key event is too far off. For example:
I:kasp:check next key event for zone step2.algorithm-roll.kasp (570)
I:kasp:error: bad next key event time 20909 for zone \
step2.algorithm-roll.kasp (expect 21600)
I:kasp:failed
This is because the kasp system test calculates the time when the
next key event should occur based on the policy. This assumes that
named is able to do key management within a minute. But starting,
named, doing key management for other zones, and reconfiguring takes
much more time on Windows and thus the next key event on Windows is
much shorter than anticipated.
That this happens is a good thing because this means that the
correct next key event is used, but is not so nice for testing, as
it is hard to determine how much time named needed before finishing
the current key event.
Disable the kasp test on Windows now because it is blocking the
release. We know the cause of these test failures, and it is clear
that this is a fault in the test, not the code. Therefore we feel
comfortable disabling the test right now and work on a fix while
unblocking the release.
(cherry picked from commit 4e610b7f6b)
ABI checker tools generate HTML and TXT API compatibility reports of
BIND libraries. Comparison is being done between two bind source trees
which hold built BIND.
In the CI one version is the reference version defined by
BIND_BASELINE_VERSION variable, the latter one is the HEAD of branch
under test.
(cherry picked from commit 49bc08e612)
Add a test case for algorithm rollover. This is triggered by
changing the dnssec-policy. A new nameserver ns6 is introduced
for tests related to dnssec-policy changes.
This requires a slight change in check_next_key_event to only
check the last occurrence. Also, change the debug log message in
lib/dns/zone.c to deal with checks when no next scheduled key event
exists (and default to loadkeys interval 3600).
(cherry picked from commit 88ebe9581b)
- Define the SLOT environment variable before starting the test. This
variable defaults to 0 and that does not work with SoftHSM 2.
- The system test expects the PIN environment variable to be set to
"1234" while bin/tests/prepare-softhsm2.sh sets it to "0000".
Update bin/tests/prepare-softhsm2.sh so that it sets the PIN to
"1234".
- Move contents of bin/tests/system/pkcs11/prereq.sh to
bin/tests/system/pkcs11/setup.sh as the former was creating a file
called "supported" that was getting removed by the latter before
bin/tests/system/pkcs11/tests.sh could access it.
- Fix typo in "have_ecx".
(cherry picked from commit 100a230e80f01a777b917b135b4bae9a4ac0e8ae)
- the configuration summary reported zlib compression was not
supported even when it was.
- when bind.keys.h was regenerated it violated clang-format style.
(cherry picked from commit beda680f90)
Start enforcing the clang-format rules on changed files
Closes#46
See merge request isc-projects/bind9!3063
(cherry picked from commit a04cdde45d)
d2b5853b Start enforcing the clang-format rules on changed files
618947c6 Switch AlwaysBreakAfterReturnType from TopLevelDefinitions to All
654927c8 Add separate .clang-format files for headers
5777c44a Reformat using the new rules
60d29f69 Don't enforce copyrights on .clang-format
adjust clang-format options to get closer to ISC style
See merge request isc-projects/bind9!3061
(cherry picked from commit d3b49b6675)
0255a974 revise .clang-format and add a C formatting script in util
e851ed0b apply the modified style
Add curly braces using uncrustify and then reformat with clang-format back
Closes#46
See merge request isc-projects/bind9!3057
(cherry picked from commit 67b68e06ad)
36c6105e Use coccinelle to add braces to nested single line statement
d14bb713 Add copy of run-clang-tidy that can fixup the filepaths
056e133c Use clang-tidy to add curly braces around one-line statements
- Merge release notes from all 9.15.x releases, leaving only those
which do not apply to BIND 9.14.
- Add missing GitLab/RT issue identifiers.
- Update "Introduction", "Note on Version Numbering", and "End of
Life" sections with BIND 9.16 information.
Reformat source code with clang-format
Closes#46
See merge request isc-projects/bind9!2156
(cherry picked from commit 7099e79a9b)
4c3b063e Import Linux kernel .clang-format with small modifications
f50b1e06 Use clang-format to reformat the source files
11341c76 Update the definition files for Windows
df6c1f76 Remove tkey_test (which is no-op anyway)
- Add quotes before and after zone name when generating "addzone"
input so avoid "unexpected token" errors.
- Use a hex digest for zone filenames when the zone or view name
contains a slash.
- Test with a domain name containing a slash.
- Incidentally added 'catzhash.py' to contrib/scripts to generate
hash labels for catalog zones, as it was needed to write the test.
These functions can be used to pass a uv handle between threads in a
safe manner. The other option is to use uv_pipe and pass the uv_handle
via IPC, which is way more complex. uv_export() and uv_import() functions
existed in libuv at some point but were removed later. This code is
based on the original removed code.
The Windows version of the code uses two functions internal to libuv;
a patch for libuv is attached for exporting these functions.
The util/prepare-softhsm2.sh script is useful for initializing a working
SoftHSM environment which can be used by unit tests and system tests.
However, since it is a test-specific script, it does not really belong
in the util/ subdirectory which is mostly pruned during the BIND source
tarball creation process. Move the prepare-softhsm2.sh script to
bin/tests/ so that its location is more appropriate for its purpose and
also so that it does not get removed during the BIND source tarball
creation process, allowing it to be used for setting up test
environments for tarball-based builds.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
Since the role of the bin/tests/system/clean.sh script has now been
reduced to calling a given system test's clean.sh script, remove the
former altogether and replace its only use with a direct invocation of
the latter.
Some semantic patches are meant to be run just once, as they work on
functions with changed prototypes. We keep them for reference, but
disabled them from the CI to save time.
The "runtime" system test currently fails on Windows because it waits
for named to log a message indicating successful startup ("running"),
but that never happens since named on Windows fails to open the
configuration file as its path includes control characters.
Instead of putting control characters in directory names, put them in
the value of the -D command line switch passed to named, which is used
for identifying an instance of named in a process listing and whose
value is completely ignored by named, but still logged.
While a similar check using special characters appears to be working
fine on Windows for the time being, modify it in the same way to avoid
potential future problems on other platforms and make the test cleaner.
Intertwining release notes from different BIND releases in a single XML
file has caused confusion in the past due to different (and often
arbitrary) approaches to keeping/removing release notes from older
releases on different BIND branches. Divide doc/arm/notes.xml into
per-version sections to simplify determining the set of changes
introduced by a given release and to make adding/reviewing release notes
less error-prone.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
This is a replacement for the existing isc_socket and isc_socketmgr
implementation. It uses libuv for asynchronous network communication;
"networker" objects will be distributed across worker threads reading
incoming packets and sending them for processing.
UDP listener sockets automatically create an array of "child" sockets
so each worker can listen separately.
TCP sockets are shared amongst worker threads.
A TCPDNS socket is a wrapper around a TCP socket, which handles the
the two-byte length field at the beginning of DNS messages over TCP.
(Other wrapper socket types can be implemented in the future to handle
DNS over TLS, DNS over HTTPS, etc.)
'dnssec-policy' can now also be set on the options and view level and
a zone that does not set 'dnssec-policy' explicitly will inherit it
from the view or options level.
This requires a new keyword to be introduced: 'none'. If set to
'none' the zone will not be DNSSEC maintained, in other words it will
stay unsigned. You can use this to break the inheritance. Of course
you can also break the inheritance by referring to a different
policy.
The keywords 'default' and 'none' are not allowed when configuring
your own dnssec-policy statement.
Add appropriate tests for checking the configuration (checkconf)
and add tests to the kasp system test to verify the inheritance
works.
Edit the kasp system test such that it can deal with unsigned zones
and views (so setting a TSIG on the query).
Add more tests for kasp:
- Add tests for different algorithms.
- Add a test to ensure that an edit in an unsigned zone is
picked up and properly signed.
- Add two tests that ensures that a zone gets signed when it is
configured as so-called 'inline-signing'. In other words, a
secondary zone that is configured with a 'dnssec-policy'. A zone
that is transferred over AXFR or IXFR will get signed.
- Add a test to ensure signatures are reused if they are still
fresh enough.
- Adds two more tests to verify that expired and unfresh signatures
will be regenerated.
- Add tests for various cases with keys already available in the
key-directory.
Add a key manager to named. If a 'dnssec-policy' is set, 'named'
will run a key manager on the matching keys. This will do a couple
of things:
1. Create keys when needed (in case of rollover for example)
according to the set policy.
2. Retire keys that are in excess of the policy.
3. Maintain key states according to "Flexible and Robust Key
Rollover" [1]. After key manager ran, key files will be saved to
disk.
[1] https://matthijsmekking.nl/static/pdf/satin2012-Schaeffer.pdf
KEY GENERATION
Create keys according to DNSSEC policy. Zones configured with
'dnssec-policy' will allow 'named' to create DNSSEC keys (similar
to dnssec-keymgr) if not available.
KEY ROLLOVER
Rather than determining the desired state from timing metadata,
add a key state goal. Any keys that are created or picked from the
key ring and selected to be a successor has its key state goal set
to OMNIPRESENT (this key wants to be signing!). At the same time,
a key that is being retired has its key state goal set to HIDDEN.
The keymgr state machine with the three rules will make sure no
introduction or withdrawal of DNSSEC records happens too soon.
KEY TIMINGS
All timings are based on RFC 7583.
The keymgr will return when the next action is happening so
that the zone can set the proper rekey event. Prior to this change
the rekey event will run every hour by default (configurable),
but with kasp we can determine exactly when we need to run again.
The prepublication time is derived from policy.
