Previously a hard-coded limitation of maximum two key or message
verification checks were introduced when checking the message's
SIG(0) signature. It was done in order to protect against possible
DoS attacks. The logic behind choosing the number two was that more
than one key should only be required only during key rotations, and
in that case two keys are enough. But later it became apparent that
there are other use cases too where even more keys are required, see
issue number #5050 in GitLab.
This change introduces two new configuration options for the views,
sig0key-checks-limit and sig0message-checks-limit, which define how
many keys are allowed to be checked to find a matching key, and how
many message verifications are allowed to take place once a matching
key has been found. The latter protects against expensive cryptographic
operations when there are keys with colliding tags and algorithm
numbers, with default being 2, and the former protects against a bit
less expensive key parsing operations and defaults to 16.
(cherry picked from commit 716b936045)
Expose the average transfer rate (in bytes-per-second) during the
last full 'min-transfer-rate-in <bytes> <minutes>' minutes interval.
If no such interval has passed yet, then the overall average rate is
reported instead.
(cherry picked from commit c701b590e4)
This new option sets a minimum amount of transfer rate for
an incoming zone transfer that will abort a transfer, which
for some network related reasons run very slowly.
(cherry picked from commit 91ea156203)
Add a new dns_rdataset_equals() function to check whether two
rdatasets are equal in DNSSEC terms.
When an rdataset being cached is rejected because its trust
level is lower than the existing rdataset, we now check to see
whether the rejected data was identical to the existing data.
This allows us to cache a potentially useful RRSIG when handling
CD=1 queries, while still rejecting RRSIGs that would definitely
have resulted in a validation failure.
(cherry picked from commit 6aba56ae89)
In #1870, the expiration time of ANCIENT records were printed, but
actually the ancient records are very short lived, and the information
carries a little value.
Instead of printing the expiration of ANCIENT records, print the
expiration time of STALE records.
(cherry picked from commit 355fc48472)
In order to avoid to loop to find the next position to store an EDE in
a dns_edectx_t, add a "nextede" state which holds the next available
position.
Also, in order ot avoid to loop to find if an EDE is already existing in
a dns_edectx_t, and avoid a duplicate, use a bitmap to immediately know
if the EDE is there or not.
Those both changes applies for adding or copying EDE.
Also make the direction of dns_ede_copy more explicit/avoid errors by
making "edectx_from" a const pointer.
(cherry picked from commit 9021f9d802)
Add documentation usage of EDE compilation unit as well as centralize
all EDE-related macros in the same lib/dns/include/dns/ede.h header.
(cherry picked from commit 7b01cbfb04)
Migrate tests cases in client_test code which were exclusively testing
code which is now all wrapped inside ede compilation unit. Those are
testing maximum number of EDE, duplicate EDE as well as truncation of
text of an EDE.
Also add coverage for the copy of EDE from an edectx to another one, as
well as checking the assertion of the maximum EDE info code which can be
used.
(cherry picked from commit f9f41190b3)
Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the EDE codes are directly copied into the ns_client
buffers by passing the EDE context to dns_resolver_createfetch().
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Co-authored-by: Colin Vidal <colin@isc.org>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
(cherry picked from commit 2f8e0edf3b)
Add support for EDE codes 1 (Unsupported DNSKEY Algorithm) and 2
(Unsupported DS Digest Type) which might occurs during DNSSEC
validation in case of unsupported DNSKEY algorithm or DS digest type.
Because DNSSEC internally kicks off various fetches, we need to copy
all encountered extended errors from fetch responses to the fetch
context. Upon an event, the errors from the fetch context are copied
to the client response.
(cherry picked from commit 46a58acdf5)
Track inside the dns_dnsseckey structure whether we have seen the
private key, or if this key only has a public key file.
If the key only has a public key file, or a DNSKEY reference in the
zone, mark the key 'pubkey'. In dnssec-signzone, if the key only
has a public key available, consider the key to be offline. Any
signatures that should be refreshed for which the key is not available,
retain the signature.
So in the code, 'expired' becomes 'refresh', and the new 'expired'
is only used to determine whether we need to keep the signature if
the corresponding key is not available (retaining the signature if
it is not expired).
In the 'keysthatsigned' function, we can remove:
- key->force_publish = false;
- key->force_sign = false;
because they are redundant ('dns_dnsseckey_create' already sets these
values to false).
(cherry picked from commit 5e3aef364f)
Extended DNS error mechanism (EDE) enables to have several EDE raised
during a DNS resolution (typically, a DNSSEC query will do multiple
fetches which each of them can have an error). Add support to up to 3
EDE errors in an DNS response. If duplicates occur (two EDEs with the
same code, the extra text is not compared), only the first one will be
part of the DNS answer.
Because the maximum number of EDE is statically fixed, `ns_client_t`
object own a static vector of `DNS_DE_MAX_ERRORS` (instead of a linked
list, for instance). The array can be fully filled (all slots point to
an allocated `dns_ednsopt_t` object) or partially filled (or
empty). In such case, the first NULL slot means there is no more EDE
objects.
(cherry picked from commit 4096f27130)
If the generated status output exceeds 4096 it was silently truncated,
now we output that the status was truncated.
(cherry picked from commit 7ae7851173)
When answering queries, don't add data to the additional section if
the answer has more than 13 names in the RDATA. This limits the
number of lookups into the database(s) during a single client query,
reducing query processing load.
Also, don't append any additional data to type=ANY queries. The
answer to ANY is already big enough.
(cherry picked from commit a1982cf1bb)
This is a second attempt to rewrite the GLUE cache to not use per
database version hash table. Instead of keeping a hash table indexed by
the node, use a directly linked list of GLUE records for each
slabheader. This was attempted before, but there was a data race caused
by the fact that the thread cleaning the GLUE records could be slower
than accessing the slab headers again and reinitializing the wait-free
stack.
The improved design builds on the previous design, but adds a new
dns_gluelist structure that has a pointer to the database version.
If a dns_gluelist belonging to a different (old) version is detected, it
is just detached from the slabheader and left for the closeversion() to
clean it up later.
(cherry picked from commit 29bde687b5)
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
(cherry picked from commit bbc16cc8e6)
In dns_zone_getdnssecsignstats, dns_zone_getrcvquerystats and
dns_zone_getrequeststats attach to the statistics structure.
(cherry picked from commit fb50a71159)
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
(cherry picked from commit d13e94b930)
Commit amended in order to fix usage of isc_log_write (adding dns_lctx
parameter)
There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
(cherry picked from commit ee122ba025)
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
(cherry picked from commit b61739836d)
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
(cherry picked from commit 2cb5a6210f)
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
(cherry picked from commit a6cce753e2)
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
(cherry picked from commit 99b4f01b33)
There is a data race between the statistics channel, which uses
`dns_zone_getxfr()` to get a reference to `zone->xfr`, and the creation
of `zone->xfr`, because the latter happens outside of a zone lock.
Split the `dns_xfrin_create()` function into two parts to separate the
zone tranfer startring part from the zone transfer object creation part.
This allows us to attach the new object to a local variable first, then
attach it to `zone->xfr` under a lock, and only then start the transfer.
(cherry picked from commit dbf230650f)
Add an option to dnssec-ksr keygen, -o, to create KSKs instead of ZSKs.
This way, we can create a set of KSKS for a given period too.
For KSKs we also need to set timing metadata, including "SyncPublish"
and "SyncDelete". This functionality already exists in keymgr.c so
let's make the function accessible.
Replace dnssec-keygen calls with dnssec-ksr keygen for KSK in the
ksr system test and check keys for created KSKs as well. This requires
a slight modification of the check_keys function to take into account
KSK timings and metadata.
(cherry picked from commit 680aedb595)
Dispatch needs to know the transport that is being used over the
TCP connection to correctly allow for it to be reused. Add a
transport parameter to dns_dispatch_createtcp and dns_dispatch_gettcp
and use it when selecting a TCP socket for reuse.
(cherry picked from commit baab8a5d75)
The dns_zone_getxfrintime() function fails to lock the zone before
accessing its 'xfrintime' structure member, which can cause a data
race between soa_query() and the statistics channel. Add the missing
locking/unlocking pair, like it's done in numerous other similar
functions.
(cherry picked from commit ab07803465)
Static-stub address and addresses from other sources where being
mixed together resulting in static-stub queries going to addresses
not specified in the configuration or alternatively static-stub
addresses being used instead of the real addresses.
(cherry picked from commit b3a2c790f3)
Return partial match from dns_db_find/dns_db_find when requested
to short circuit the closest encloser discover process. Most of the
time this will be the actual closest encloser but may not be when
there yet to be committed / cleaned up versions of the zone with
names below the actual closest encloser.
(cherry picked from commit d42ea08f16)
Give prefetches a free pass through the quota so that the cache
entries for popular zones could be updated successfully even if the
quota for is already reached.
(cherry picked from commit c7e8b7cf63)
When it is time to generate a new signature (dns_dnssec_sign), rather
than create a new one, retrieve it from the SKR.
(cherry picked from commit 61cf599fbf)
When we are appending contents of a DNSKEY rdataset to a keylist,
don't attempt to read the private key file of a KSK when we are in
offline-ksk mode.
(cherry picked from commit 30d20b110e)
With offline-ksk enabled, we don't run the keymgr because the key
timings are determined by the SKR. We do update the key states but
we derive them from the timing metadata.
Then, we can skip a other tasks in offline-ksk mode, like DS checking
at the parent and CDS synchronization, because the CDS and CDNSKEY
RRsets also come from the SKR.
(cherry picked from commit 2190aa904f)
This added source code stores SKR data. It is loosely based on:
https://www.iana.org/dnssec/archive/files/draft-icann-dnssec-keymgmt-01.txt
A SKR contains a list of signed DNSKEY RRsets. Each change in data
should be stored in a separate bundle. So if the RRSIG is refreshed that
means it is stored in the next bundle. Likewise, if there is a new ZSK
pre-published, it is in the next bundle.
In addition (not mentioned in the draft), each bundle may contain
signed CDS and CDNSKEY RRsets.
Each bundle has an inception time. These will determine when we need
to re-sign or re-key the zone.
(cherry picked from commit 445722d2bf)
Aram Sargsyan
Evan Hunt
Ondřej Surý
Colin Vidal
Andoni Duarte Pintado
Michal Nowak
Matthijs Mekking
Alessio Podda
Nicki KřížekandOndřej Surý