Previously, the hashmap iterator for fetches-per-zone was destroy
outside the rwlock. This could lead to an assertion failure due to a
timing race with the internal rehashing of the hashmap table as the
rehashing process requires no iterators to be running when rehashing the
hashmap table. This has been fixed by moving the destruction of the
iterator inside the read locked section.
The third argument to set_offsets() was only used in
dns_name_fromregion() and not really needed. We can remove the third
argument and then manually check whether the last label is root label.
There was just a single use of passing an extra buffer to
dns_name_downcase() which have been replaced by simple call to
isc_ascii_lowercase() and the 'target' argument from dns_name_downcase()
function has been removed.
The MAKE_EMPTY() macro was clearing up the output variable in case of
the failure. However, this was breaking the usual design pattern that
the output variables are left in indeterminate state or we don't touch
them at all when a failure occurs. Remove the macro and change the
dns_name_downcase() to not touch the name contents until success.
There was a back-and-forth between static arrays and the pointers to the
offsets. Since we are now only using the static arrays, we can cleanup
the usage of the pointers that would previously point either to the
static array or name->offsets if available.
The offsets were meant to speed-up the repeated dns_name operations, but
it was experimentally proven that there's actually no real-world
benefit. Remove the offsets and labels fields from the dns_name and the
static offsets fields to save 128 bytes from the fixedname in favor of
calculating labels and offsets only when needed.
The DNS header shows if a message has multiple questions or invalid
NOTIFY sections. We can drop these messages early, right after parsing
the question. This matches RFC 9619 for multi-question messages and
Unbound's handling of NOTIFY.
To further add further robustness, we include an additional check for
unknown opcodes, and also drop those messages early.
Add early_sanity_check() function to check for these conditions:
- Messages with more than one question, as required by RFC 9619
- NOTIFY query messages containing answer sections (like Unbound)
- NOTIFY messages containing authority sections (like Unbound)
- Unknown opcodes.
A change in 6aba56ae8 (checking whether a rejected RRset was identical
to the data it would have replaced, so that we could still cache a
signature) inadvertently introduced cases where processing of a
response would continue when previously it would have been skipped.
Acquire the database refernce in the detachnode() to prevent the last
reference to be release while the NODE_LOCK being locked. The NODE_LOCK
is locked/unlocked inside the RCU critical section, thus it is most
probably this should not pose a problem as the database uses call_rcu
memory reclamation, but this it is still safer to acquire the reference
before releasing the node.
As the default_call_rcu_thread can't be forced to flush all the work
during the executable shutdown, create one call_rcu_thread explicitly
and assign it to the all created threads.
This allows this explicit call_rcu_thread to be unassociated from the
main thread and freed before the executable destructor exits.
Instead of relying on unreliable order of execution of the library
constructors and destructors, move them to individual binaries. The
advantage is that the execution time and order will remain constant and
will not depend on the dynamic load dependency solver.
This requires more work, but that was mitigated by a simple requirement,
any executable using libisc and libdns, must include <isc/lib.h> and
<dns/lib.h> respectively (in this particular order). In turn, these two
headers must not be included from within any library as they contain
inlined functions marked with constructor/destructor attributes.
Previously, the dns_resolver_dumpfetches() would go over the fetch
counters. Alas, because of the earlier optimization, the fetch counters
would be increased only when fetches-per-zone was not 0, otherwise the
whole counting was skipped for performance reasons.
Instead of using the auxiliary fetch counters hash table, use the real
hash table that stores the fetch contexts to dump the ongoing fetches to
the recursing file.
Additionally print more information about the fetch context like start
and expiry times, number of fetch responses, number of queries and count
of allowed and dropped fetches.
The order of the fetch context hash table rwlock and the individual
fetch context was reversed when calling the release_fctx() function.
This was causing a problem when iterating the hash table, and thus the
ordering has been corrected in a way that the hash table rwlock is now
always locked on the outside and the fctx lock is the interior lock.
In the next commit, we need to know whether the timer has been started
or stopped. Add isc_timer_running() function that returns true if the
timer has been started.
After a reconfiguration the old view can be left without a valid
'rpzs' member, because when the RPZ is not changed during the named
reconfiguration 'rpzs' "migrate" from the old view into the new
view, so when a query resumes it can find that 'qctx->view->rpzs'
is NULL which query_resume() currently doesn't expect to happen if
it's recursing and 'qctx->rpz_st' is not NULL.
Fix the issue by adding a NULL-check. In order to not split the log
message to two different log messages depending on whether
'qctx->view->rpzs' is NULL or not, change the message to not log
the RPZ policy's "version" which is just a runtime counter and is
most likely not very useful for the users.
The isc_counter_create() doesn't need the return value (it was always
ISC_R_SUCCESS), use the macros to implement the reference counting,
little style cleanup, and expand the unit test.
Checking whether the authority section is properly signed should
be left to the validator. Checking in getsection (dns_message_parse)
was way too early and resulted in resolution failures of lookups
that should have otherwise succeeded.
Previously a hard-coded limitation of maximum two key or message
verification checks were introduced when checking the message's
SIG(0) signature. It was done in order to protect against possible
DoS attacks. The logic behind choosing the number two was that more
than one key should only be required only during key rotations, and
in that case two keys are enough. But later it became apparent that
there are other use cases too where even more keys are required, see
issue number #5050 in GitLab.
This change introduces two new configuration options for the views,
sig0key-checks-limit and sig0message-checks-limit, which define how
many keys are allowed to be checked to find a matching key, and how
many message verifications are allowed to take place once a matching
key has been found. The latter protects against expensive cryptographic
operations when there are keys with colliding tags and algorithm
numbers, with default being 2, and the former protects against a bit
less expensive key parsing operations and defaults to 16.
Running jobs which were entered into the isc_quota queue is the
responsibility of the isc_quota_release() function, which, when
releasing a previously acquired quota, checks whether the queue
is empty, and if it's not, it runs a job from the queue without touching
the 'quota->used' counter. This mechanism is susceptible to a possible
hangup of a newly queued job in case when between the time a decision
has been made to queue it (because used >= max) and the time it was
actually queued, the last quota was released. Since there is no more
quotas to be released (unless arriving in the future), the newly
entered job will be stuck in the queue.
Fix the wrong memory ordering for 'quota->used', as the relaxed
ordering doesn't ensure that data modifications made by one thread
are visible in other threads.
Add checks in both isc_quota_release() and isc_quota_acquire_cb()
to make sure that the described hangup does not happen. Also see
code comments.
Expose the average transfer rate (in bytes-per-second) during the
last full 'min-transfer-rate-in <bytes> <minutes>' minutes interval.
If no such interval has passed yet, then the overall average rate is
reported instead.
This new option sets a minimum amount of transfer rate for
an incoming zone transfer that will abort a transfer, which
for some network related reasons run very slowly.
Add a new dns_rdataset_equals() function to check whether two
rdatasets are equal in DNSSEC terms.
When an rdataset being cached is rejected because its trust
level is lower than the existing rdataset, we now check to see
whether the rejected data was identical to the existing data.
This allows us to cache a potentially useful RRSIG when handling
CD=1 queries, while still rejecting RRSIGs that would definitely
have resulted in a validation failure.
The "raw" version of the header was used for the noqname and the closest
proofs to save around 152 bytes of the dns_slabheader_t while bringing
an additional complexity. Remove the raw version of the dns_slabheader
API at the slight expense of having unused dns_slabheader_t data sitting
in front of the proofs.
reduce the number of rdata comparisons needed by walking
through the original slab once to determine whether the rdata
in it is duplicated in the slab to be subtracted, and then
write out the rdatas that aren't. previously, this was
done twice: once when determining the size of the target buffer
and then again when copying data into it.
when merging two rdata slabs, we now check once to see
whether an item in the new slab has a duplicate in the
old. previously this was done twice; once to determine the
size of the target buffer required, and then again when
copying the data into it.
we also minimize the number of rdata comparisons necessary,
by remembering which items in the old slab have already been
found to be duplicates.
The function name dns_slabheader_fromrdataset() was too similar
to dns_rdataslab_fromrdataset(). Instead, we now have an rdataset
method 'getheader' which is implemented for slab-type rdatasets.
A new NOHEADER rdataset attribute is set for rdatasets using
raw slabs (i.e., noqname and closest encloser proofs); when
called on rdatasets with that flag set, dns_rdataset_getheader()
returns NULL.
when dns_rdataslab_fromrdataset() is run, in addition to
allocating space for a slab header, it also partially
initializes it, setting the type match rdataset->type and
rdataset->covers, the trust to rdataset->trust, and the TTL to
rdataset->ttl.
there are now two functions for creating an rdataslab from an
rdataset: dns_rdataslab_fromrdataset() creates a full slab (including
space for a slab header), and dns_rdataslab_raw_fromrdataset() creates
a raw slab.
- there are now two functions for getting rdataslab size:
dns_rdataslab_size() is for full slabs and dns_rdataslab_sizeraw()
for raw slabs. there is no longer a need for a reservelen parameter.
- dns_rdataslab_count() also no longer takes a reservelen parameter.
(currently it's never used for raw slabs, so there is no _countraw()
function.)
- dns_rdataslab_rdatasize() has been removed, because
dns_rdataslab_sizeraw() can do the same thing.
- dns_rdataslab_merge() and dns_rdataslab_subtract() both take
slabheader parameters instead of character buffers, and the
reservelen parameter has been removed.
if both rdataslabs being compared have zero length, return true.
also, since these functions are only ever called on slabheaders
with sizeof(dns_slabheader_t) as the reserve length, we can
simplify the API: remove the reservelen argument, and pass the
slabs as type dns_slabheader_t * instead of unsigned char *.
The dns_slabheader object uses the 'next' pointer for two purposes.
In the first header for any given type, 'next' points to the first
header for the next type. But 'down' points to the next header of
the same type, and in that record, 'next' points back up.
This design made the code confusing to read. We now use a union
so that the 'next' pointer can also be called 'up'.
The value returned by http_send_outgoing() is not used anywhere, so we
make it not return anything (void). Probably it is an omission from
older times.
When handling outgoing data, there were a couple of rarely executed
code paths that would not take into account that the callback MUST be
called.
It could lead to potential memory leaks and consequent shutdown hangs.
This commit changes the way how the number of active HTTP streams is
calculated and allows it to scale with the values of the maximum
amount of streams per connection, instead of effectively capping at
STREAM_CLIENTS_PER_CONN.
The original limit, which is intended to define the pipelining limit
for TCP/DoT. However, it appeared to be too restrictive for DoH, as it
works quite differently and implements pipelining at protocol level by
the means of multiplexing multiple streams. That renders each stream
to be effectively a separate connection from the point of view of the
rest of the codebase.
Previously we would limit the amount of incoming data to process based
solely on the presence of not completed send requests. That worked,
however, it was found to severely degrade performance in certain
cases, as was revealed during extended testing.
Now we switch to keeping track of how much data is in flight (or ready
to be in flight) and limit the amount of processed incoming data when
the amount of in flight data surpasses the given threshold, similarly
to like we do in other transports.
Database versions are not used in cache databases. Some places in
qpcache.c required the version argument to be NULL; others marked it
as UNUSED. Unify all cases to require version to be NULL.
Add new related_headers() function that simplifies the code
flow in qpcache_findrdataset(). Also use check_stale_header() function
to remove code duplication.
Add a helper function both_headers() that unifies the slabheader
matching for simple type: it returns true when both the type and
the matching RRSIG have been found.
The new maybe_update_headers() function unifies the LRU updates to the
slabheaders that was scattered all over the place. More calls to update
headers after bindrdatasets() were also added for completeness.
This removes code duplication between the dual bindrdataset() calls. It
also unifies the handling as there were small differences between the
calls: one variant was checking for !NEGATIVE(found) condition and one
wasn't, and it is technically ok to do the check for all variants.
The check_stale_header() function now updates header_prev directly
so it doesn't have to be handled in the outer loop; it's always
set to the correct value of the previous header in the chain.
some code was left in the cache database implementation after
it was separated from the zone database, and can be cleaned up
and refactored now:
- the DNS_SLABHEADERATTR_IGNORE flag is never set in the cache
- support for loading the cache from was removed, but the add()
function still had a 'loading' flag that's always false
- two different macros were used for checking the
DNS_SLABHEADERATTR_NONEXISTENT flag - EXISTS() and NONEXISTENT().
it's clearer to just use EXISTS().
- the cache doesn't support versions, so it isn't necessary to
walk down the 'down' pointer chain when iterating through the
cache or looking for a header to update. 'down' now only points
to records that are deleted from the cache but have not yet been
purged from memory. this allows us to simplify both the iterator
and the add() function.
