In recv_done(), when dig decides to start the lookup's next query in
the line using `start_udp()` or `start_tcp()`, and for some reason,
no queries get started, dig doesn't cancel the lookup.
This can occur, for example, when there are two queries in the lookup,
one with a regular IP address, and another with a IPv4 mapped IPv6
address. When the regular IP address fails to serve the query, its
`recv_done()` callback starts the next query in the line (in this
case the one with a mapped IP address), but because `dig` doesn't
connect to such IP addresses, and there are no other queries in the
list, no new queries are being started, and the lookup keeps hanging.
After calling `start_udp()` or `start_tcp()` in `recv_done()`, check
if there are no pending/working queries then cancel the lookup instead
of only detaching from the current query.
(cherry picked from commit 7e2f50c369)
Rework the "ans8" server in the "digdelv" system test to support various
modes of operations using a control channel.
The supported modes are:
1. `silent` (do not respond)
2. `close` (UDP: same as `silent`; TCP: also close the connection)
3. `servfail` (always respond with `SERVFAIL`)
4. `unstable` (constantly switch between `silent` and `servfail`)
Add multiple tests to check the handling of both TCP and UDP socket
error scenarios in dig/host.
(cherry picked from commit 03697f1bcc)
Add a test to check whether dig tries the next query/server after
a connection error.
Add a test to check whether dig tries the next query/server after
a one or more (default is 3) connection/request timeouts.
(cherry picked from commit e8a64d0cbe)
This test ensures that `dig` retries with another attempt after a
timed-out request, and that it does not crash when the retried
request returns a SERVFAIL result. See [GL #3020] for the latter
issue.
(cherry picked from commit 3ec5d2d6ed)
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
(cherry picked from commit 1d706f328c)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
The digdelv system test has a test case in which stderr was
included in the dig output. When trace logging was in use,
this confused the grep and caused a spurious test failure.
Address the following warnings reported by PyLint 2.10.2:
************* Module tests-checkds
bin/tests/system/checkds/tests-checkds.py:70:9: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
bin/tests/system/checkds/tests-checkds.py:120:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
bin/tests/system/checkds/tests-checkds.py:206:17: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
************* Module yamlget
bin/tests/system/digdelv/yamlget.py:22:5: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
************* Module stress_http_quota
bin/tests/system/doth/stress_http_quota.py:131:13: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
************* Module tests-rpz-passthru-logging
bin/tests/system/rpzextra/tests-rpz-passthru-logging.py:40:9: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
bin/tests/system/rpzextra/tests-rpz-passthru-logging.py:44:9: W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
Added tests to ensure that dig won't retry sending a query over tcp
(+tcp) when a TCP connection is closed prematurely (EOF is read) if
either +tries=1 or retry=0 is specified on the command line.
Now that premature EOF on tcp connections take +tries and +retry into
account, the dig system tests handling TCP EOF with +tries=1 were
expecting dig to do a second attempt in handling the tcp query, which
doesn't happen anymore.
To make the test work as expected +tries value was adjusted to 2, to
make it behave as before after the new update on dig.
The network manager does not support returning UDP datagrams to
clients from unexpected sources; it is therefore not possible for
dig to accept them. The "+[no]unexpected" option has therefore
been removed from the dig command and its documentation.
* the legacy test with -T maxudp512 will just fail, e.g. if the packets
larger than 512 octets are dropped along the path, the proper response
is to fail
* digdelv test was just expecting default server EDNS buffer size to be
4096, the test needed only slight adjustment
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
The yamlget.py file was changed in !3311 as part of making the
python code pylint and flake8 compliant. This omitted setting
'item' to 'item[key]' which caused the digdelv yaml tests to fail.
Also, the pretty printing is not really necessary, so remove
the "if key not in item; print error" logic.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
The indentation for dumping the master zone was driven by two
global variables dns_master_indent and dns_master_indentstr. In
threaded mode, this becomes prone to data access races, so this commit
converts the global variables into a local per-context tuple that
consist of count and string.
Portion of the digdelv test are skipped on IPv6 due to extra quotes
around $TESTSOCK6: "I:digdelv:IPv6 unavailable; skipping".
Researched by @michal.
Regressed with 351efd8812.
The BusyBox version of sed treats leading '\+' in a regular expression
to be matched as a syntax error ("Repetition not preceded by valid
expression"), which triggers false positives for the "digdelv" system
test. Make the relevant sed invocations work portably across all sed
implementations by removing the leading backslash.
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
