Appending output of a command to the same file as the one that command
is reading from is a dangerous practice. It seems to have accidentally
worked with all the awk implementations we have tested against so far,
but for BusyBox awk, doing this may result in the input/output file
being written to in an infinite loop. Prevent this from happening by
redirect awk output to a temporary file and appending its contents to
the original file in a separate shell pipeline.
(cherry picked from commit bb9c1654e2)
The Net::DNS Perl module needs the Digest::HMAC module to support TSIG.
However, since the latter is not a hard requirement for the former, some
packagers do not make Net::DNS depend on Digest::HMAC. If Net::DNS is
installed on a host but Digest::HMAC is not, the "xfer" system test
breaks in a very hard-to-debug way (ans5 returns TSIG RRs with empty
RDATA, which prevents TSIG-signed SOA queries and transfers from
working). Prevent this from happening by making the "xfer" system test
explicitly require Digest::HMAC apart from Net::DNS.
(cherry picked from commit b10d28d1e0)
The BusyBox version of sed treats leading '\+' in a regular expression
to be matched as a syntax error ("Repetition not preceded by valid
expression"), which triggers false positives for the "digdelv" system
test. Make the relevant sed invocations work portably across all sed
implementations by removing the leading backslash.
(cherry picked from commit 266e3ed52a)
The BusyBox version of awk treats some variables which other awk
implementations consider to be decimal values as octal values. This
intermittently breaks key event interval calculations in the "autosign"
system test, trigger false positives for it. Prevent the problem from
happening by stripping leading zeros from the affected awk variables.
(cherry picked from commit ad008f7dbf)
Resolvers in the "filter-aaaa" system test are configured with a single
root hint: "ns.rootservers.net", pointing to 10.53.0.1. However,
querying ns1 for "ns.rootservers.net" results in NXDOMAIN answers.
Since the TTL for the root hint is set to 0, it may happen that a
resolver's ADB will be asked to return any known addresses for
"ns.rootservers.net", but it will only have access to a cached NXDOMAIN
answer for that name and an expired root hint, which will result in a
resolution failure, triggering a false positive for the "filter-aaaa"
system test. Prevent this from happening by making all the root hints
consistent with authoritative data served by ns1.
(cherry picked from commit c19ebde14b)
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4. The change doesn't make the SipHash 2-4 to be the default algorithm, this
is up to the operator.
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
(cherry picked from commit 7d6eaad1bd)
When printing a packet, dnstap-read checks whether its text form takes
up more than the 2048 bytes allocated for the output buffer by default.
If that is the case, the output buffer is automatically expanded, but
the truncated output is left in the buffer, resulting in malformed data
being printed. Clear the output buffer before expanding it to prevent
this issue from occurring.
(cherry picked from commit 3549abe81d)
- "--with-geoip" is used to enable the legacy GeoIP library.
- "--with-geoip2" is used to enable the new GeoIP2 library
(libmaxminddb), and is on by default if the library is found.
- using both "--with-geoip" and "--with-geoip2" at the same time
is an error.
- an attempt is made to determine the default GeoIP2 database path at
compile time if pkg-config is able to report the module prefix. if
this fails, it will be necessary to set the path in named.conf with
geoip-directory
- Makefiles have been updated, and a stub lib/dns/geoip2.c has been
added for the eventual GeoIP2 search implementation.
(cherry picked from commit fea6b5bf10)
In addition to gather how many times signatures are created per
key in a zone, also count how many of those signature creations are
because of DNSSEC maintenance. These maintenance counters are
incremented if a signature is refreshed (but the RRset did not
changed), when the DNSKEY RRset is changed, and when that leads
to additional RRset / RRSIG updates (for example SOA, NSEC).
(cherry picked from commit 6f67546cd6)
This adds tests to the statschannel system test for testing if
the dnskey sign operation counters are incremented correctly.
It tests three cases:
1. A zone maintenance event where all the signatures that are about
to expire are resigned.
2. A dynamic update event where the new RR and other relevant records
(SOA, NSEC) are resigned.
3. Adding a standby key, that means the DNSKEY and SOA RRset are
resigned.
(cherry picked from commit a8750a8805)
libidn2 2.2.0+ parses Punycode more strictly than older versions and
thus "dig +idnin +noidnout xn--19g" fails with libidn2 2.2.0+ but
succeeds with older versions.
We could preserve the old behavior by using the IDN2_NO_ALABEL_ROUNDTRIP
flag available in libidn2 2.2.0+, but:
- this change in behavior is considered a libidn2 bug fix [1],
- we want to make sure dig behaves as expected, not libidn2,
- implementing that would require additional configure.ac cruft.
Removing the problematic check appears to be the simplest solution as it
does not prevent the relevant block of checks in the "idna" system test
from achieving its purpose, i.e. ensuring dig properly handles invalid
U-labels.
[1] see upstream commit 241e8f486134793cb0f4a5b0e5817a97883401f5
(cherry picked from commit 60ce0ed411)
Since the message confirming outgoing transfer completion is logged
asynchronously, it may happen that transfer statistics may not yet be
logged by the time the dig command triggering a given transfer returns.
This causes false positives for the "ixfr" and "xfer" system tests.
Prevent this from happening by checking outgoing transfer statistics up
to 10 times, in 1-second intervals.
(cherry picked from commit 9fc5e48b14)
In certain situations (e.g. a named instance crashing upon shutdown in a
system test which involves shutting down a server and restarting it
afterwards), a system test may succeed despite a named crash being
triggered. This must never be the case. Extend run.sh to mark a test
as failed if core dumps or log lines indicating assertion failures are
detected (the latter is only an extra measure aimed at test environments
in which core dumps are not generated; note that some types of crashes,
e.g. segmentation faults, will not be detected using this method alone).
(cherry picked from commit 7706f22924)
Make the get_named_xfer_stats() helper shell function more precise in
order to prevent it from matching the wrong lines as that may trigger
false positives for the "ixfr" and "xfer" system tests. As an example,
the regular expression responsible for extracting the number of bytes
transmitted throughout an entire zone transfer could also match a line
containing the following string:
transfer of '<zone-name>/IN': sending TCP message of <integer> bytes
However, such a line is not one summarizing a zone transfer.
Also simplify both get_dig_xfer_stats() and get_named_xfer_stats() by
eliminating the need for "echo" statements in them.
(cherry picked from commit fab67c074a)
If ns1/setup.sh generates a key with ID 0, the "KEYID" token in
ns1/named.conf.in will be replaced with an empty string, causing the
following broken statement to appear in ns1/named.conf:
tkey-dhkey "server" ;
Such a statement triggers false positives for the "tkey" system test due
to ns1 being unable to start with a broken configuration file. Fix by
tweaking the regular expression used for removing leading zeros from the
key ID, so that it removes at most 4 leading zeros.
(cherry picked from commit 0b7b1161c2)
Compiling with -O3 triggers the following warning with GCC 8.3:
driver.c: In function ‘dlz_findzonedb’:
driver.c:193:29: warning: ‘%u’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 0 and 99 [-Wformat-truncation=]
snprintf(buffer, size, "%s#%u", addr_buf, port);
^~
driver.c:193:25: note: directive argument in the range [0, 65535]
snprintf(buffer, size, "%s#%u", addr_buf, port);
^~~~~~~
driver.c:193:2: note: ‘snprintf’ output between 3 and 106 bytes into a destination of size 100
snprintf(buffer, size, "%s#%u", addr_buf, port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of the relevant array to prevent this warning from
being triggered.
(cherry picked from commit 44e6bb8b93)
Replace grep calls with awk scripts to more precisely detect presence of
CDS and CDNSKEY records in a signed zone file, in order to prevent rare
false positives for the "smartsign" system test triggered by the strings
"CDS" and/or "CDNSKEY" being accidentally present in the Base64 form of
DNSSEC-related data in the zone file being checked.
(cherry picked from commit d0a73c7da6)
qname minimization, even in relaxed mode, can fail on
some very broken domains. In relaxed mode, instead of
asking for "foo.bar NS" ask for "_.foo.bar A" to either
get a delegation or NXDOMAIN. It will require more queries
than regular mode for proper NXDOMAINs.
(cherry picked from commit ae52c2117e)
Performing server setup checks using "+tries=3 +time=5" is redundant as
a single query is arguably good enough for determining whether a given
named instance was set up properly. Only use multiple queries with a
long timeout for resolution checks in the "legacy" system test, in order
to significantly reduce its run time (on a contemporary machine, from
about 1m45s to 0m40s).
(cherry picked from commit 47b850348c)
Send a test TCP query to the "plain" server during its setup check to
improve its consistency with the setup check for the "plain + no TCP"
server.
(cherry picked from commit bb939a03ff)
In the "legacy" system test, in order to make server setup checks more
consistent with each other, add further checks for either presence or
absence of the EDNS OPT pseudo-RR in the responses returned by the
tested named instances.
(cherry picked from commit 56ed1275c6)
Extract repeated dig and grep calls into two helper shell functions,
resolution_succeeds() and resolution_fails(), in order to reduce code
duplication in the "legacy" system test, emphasize the similarity
between all the resolution checks in that test, and make the conditions
for success and failure uniform for all resolution checks in that test.
(cherry picked from commit effd16ab25)
When testing named instances which are configured to drop outgoing UDP
responses larger than 512 bytes, querying with DO=1 may be used instead
of querying for large TXT records as the effect achieved will be
identical: an unsigned response for a SOA query will be below 512 bytes
in size while a signed response for the same query will be over 512
bytes in size. Doing this makes all resolution checks in the "legacy"
system test more similar. Add checks for the TC flag being set in UDP
responses which are expected to be truncated to further make sure that
tested named instances behave as expected.
(cherry picked from commit aaf81ca6ef)
One of the checks in the "legacy" system test inspects dig.out.1.test$n
instead of dig.out.2.test$n. Fix the file name used in that check.
(cherry picked from commit 3e7fa15ca3)
Sending TCP queries to test named instances with TCP support disabled
should cause dig output to contain the phrase "connection refused", not
"connection timed out", as such instances never open the relevant
sockets. Make sure that the "legacy" system test fails if the expected
phrase is not found in any of the relevant files containing dig output.
(cherry picked from commit 9491616e5c)
If named is configured to perform DNSSEC validation and also forwards
all queries ("forward only;") to validating resolvers, negative trust
anchors do not work properly because the CD bit is not set in queries
sent to the forwarders. As a result, instead of retrieving bogus DNSSEC
material and making validation decisions based on its configuration,
named is only receiving SERVFAIL responses to queries for bogus data.
Fix by ensuring the CD bit is always set in queries sent to forwarders
if the query name is covered by an NTA.
(cherry picked from commit 5e80488270)
there is now a common list of tests in conf.sh.common, with the
tests that are either unique to windows or to unix, or which are
enabled or disabled by configure or Configure, being listed in
separate variables in conf.sh.in and conf.sh.win32.
(cherry picked from commit a33237f070)
