This commit adds a new system-test: transport-acl system test. It is
intended to test the new, extended syntax for ACLs, the one where port
or transport protocol can be specified. Currently, it includes the
tests only using allow-transfer statement, as this extended syntax is
used only there, at least for now.
This commit extends the 'doth' system test to verify that the new
extended 'allow-transfer' option syntax featuring 'port' and
'transport' parameters is supported and works as expected. That is, it
restricts the primary server to allow zone transfers only via XoT.
Additionally to that, it extends the 'checkonf' test with more
configuration file examples featuring the new syntax.
This commit disables the unused 'tls' clause options. For these some
backing code exists, but their values are not really used anywhere,
nor there are sufficient syntax tests for them.
These options are only disabled temporarily, until TLS certificate
verification gets implemented.
Use relative names when adding SOA record and a long domain
name to create SOA RR where the wire format is longer than
the initial buffer allocation in dns_sdlz_putrr.
This commit makes the 'doth' system test skip HTTP headers check when
curl version is new enough but was compiled without HTTP/2 support.
This should fix the 'doth' system test for macOS systems using
macports.
the resolver test checks that the correct number of fetches have
been sent NS rrsets of a given size, but it formerly did so by
counting queries received by the authoritative server, which could
result in an off-by-one count if one of the queries had been resent
due to a timeout or a port number collision.
this commit changes the test to count fetches initiated by the
resolver, which should prevent the intermittent test failure, and
is the actual datum we were interested in anyway.
Most of the test zones in the dnssec system test can be verified.
Use -z when only a single key is being used so that the verifier
knows that only a single key is in use.
The method used to generate a test zone with multiple NSEC and
NSEC3 chains was incorrect. Multiple calls to dnssec-signzone
with multiple parameters is not additive. Extract the chain on
each run then add them to the final signed zone instance.
This is almost minimal prototype to show how to use python-hypothesis
library in a system test. It does not fully replace existing shell-based
system test for wildcards.
Check to see whether there are outstanding requests in the
httpd receive buffer after sending the response, and if so,
process them.
Test that pipelined requests are handled by sending multiple
minimal HTTP/1.1 using netcat (nc) and checking that we get
back the same number of responses.
In the 9.17.19 release "tls" statements verification code was
added. The code was too strict and assumed that every such a statement
should have both "cert-file" and "key-file" specified. This turned out
to be a regression, as in some cases we plan to use the "tls"
statement to specify TLS connection parameters.
This commit fixes this behaviour; now a "tls" statement should either
have both "cert-file" and "key-file" specified, or both should be
omitted.
Duplicate catalog zone entries caused an assertion failure
in named during configuration. This is now a soft error
that is detected earlier by named and also by named-checkconf.
Update the nsec3 system tests to use the new default values. Change
the policy for "nsec3-other" so that we still have a test case for
non-zero salt length.
Depending upon when the directory is sampled there may be 2
(oldest version removed and rename / reopen is in progresss) or
3 old versions of the log file.
Add a lame delegation to lame.example.org with only an A record
in the additional section; on failure, this will trigger a retry
with AAAA, which will loop. Test that dig returns SERVFAIL, in
addition to confirming that named doesn't hang on shutdown.
The qmin system test was printing spurious output. On investigation,
the test case turned out to be both broken and ineffective: its
expectations were wrong, and it was printing the output because its
wrong expectations were not met, and those failed expectations were
not causing a test failure. All of this has been corrected.
The statistics system test sometimes needs a pause to wait for the
expected stats to be reported.
Also, the test for priming queries was ineffective; the result of
the grep was not being checked.
The catz system test included a test case that was looking for a single
answer record after an update, when it should have been looking for two.
The test usually passed because of timing - the first dig usually got a
response before the update was completed - but occasionally the update
processed fast enough for the test to fail. On investigation, it turned
out to be the test that was wrong.
The digdelv system test has a test case in which stderr was
included in the dig output. When trace logging was in use,
this confused the grep and caused a spurious test failure.
Update the 'catz' system test by adding tests that update an
catalog zone (catalog1.example) while preserving existing entries
(increase SOA serial) then check that catalog zone has transferred
and that the existing entries have not accidentally been removed
as a consequence (can return updated zone content).
pytest was failing because it was testing features that had
not been configured. test to see if those features have been
configured before running the tests.
due to comparing logfile suffixes as 32 bit rather than 64 bit
integers, logfiles with timestamp suffixes that should have been
removed when rolling could be left in place. this has been fixed.
the logfileconfig system test did not conform to the style of
other tests, and was difficult to read and maintain. it has
been cleaned up and simplifeid in several ways:
- named.args used when appropriate so that named can be started with
specified command line arguments, instead of having it launched
directly from tests.sh
- unused root zone removed from named configuration
- an existing directory used instead of using 'mkdir' to create one
- dnssec-validation disabled to stop the server sending unnecessary queries
incidental fix: removed leftover debugging printfs from logconf.c.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
Originally, the hash table used in RBT database would be resized when it
reached certain number of elements (defined by overcommit). This was
causing resolution brownouts for busy resolvers, because the rehashing
could take several seconds to complete. This was mitigated by
pre-allocating the hash table in the RBT database used for caching to be
large-enough as determined by max-cache-size. The downside of this
solution was that the pre-allocated hash table could take a significant
chunk of the memory even when the resolver cache would be otherwise
empty because the default value for max-cache-size is 90% of available
memory.
Implement incremental resizing[1] to perform the rehashing gradually:
1. During the resize, allocate the new hash table, but keep the old
table unchanged.
2. In each lookup or delete operation, check both tables.
3. Perform insertion operations only in the new table.
4. At each insertion also move r elements from the old table to the new
table.
5. When all elements are removed from the old table, deallocate it.
To ensure that the old table is completely copied over before the new
table itself needs to be enlarged, it is necessary to increase the
size of the table by a factor of at least (r + 1)/r during resizing.
In our implementation r is equal to 1.
The downside of this approach is that the old table and the new table
could stay in memory for longer when there are no new insertions into
the hash table for prolonged periods of time as the incremental
rehashing happens only during the insertions.
The upside of this approach is that it's no longer necessary to
pre-allocate large hash table, because the RBT hash table rehashing
doesn't cause resolution brownouts anymore and thus we can use the
memory as needed.
1. https://en.m.wikipedia.org/wiki/Hash_table#Dynamic_resizing
The documentation and feature-test were using '--with-idn' but the
configure script doesn't recognize this option. The correct option to
enable IDN support is '--with-libidn2'.
Add test to encode unicode sequence that encodes differently with
UseSTD3ASCIIRules=false which is default with idn2 >= 2.0.3 and
UseSTD3ASCIIRules=true which is what should be used to encode hostnames
and domains.
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
This commit makes dig fail with error in case a zone transfer is
attempted over a connections where ALPN was not negotiated. All other
request types will work fine.
as libdns is no longer exported, it's not necessary to have
init and shutdown functions. the only purpose they served
was to create a private mctx and run dst_lib_init(), which
can be called directly instead.
Artem Boldariev
Mark Andrews
Evan HuntandAram Sargsyan
Matthijs Mekking
Petr Špaček
Ondřej SurýandEvan Hunt