A DNSSEC validation can fail in the case where multiple DNSKEY are
available for a zone and none of them are supported, but for different
reasons: one has a DS record in the parent zone using an unsupported
digest while the other one uses an unsupported encryption algorithm.
Add a specific test case covering this flow and making sure that two
extended DNS error are provided: code 1 and 2, each of them highlighting
unsupported algorithm and digest.
(cherry picked from commit 244923b9dc)
Marks starting with "with" or "without" make more sense linguistically
than those starting with "have" or "have_not".
(cherry picked from commit df7e9f4ac3)
Ensure the zone transfers have completed (successfully or not) before
running the test cases, because they assume zone transfers have been
done.
(cherry picked from commit 23fb615963)
The servers are setup and torn down once per each test module. All the
logs and server state persists between individual tests within the same
module. The servers fixture representing these servers should be
module-wide as well.
(cherry picked from commit a72ff9fd57)
The minimal required dnspython version is 2.5.0 because of the need for
the "verify" argument in dns.query.tls().
(cherry picked from commit 100b759863)
When explicitly set to True, the "verify" argument lets dnspython verify
certificates used for the connection. As most certificates in the system
test will inevitably be self-signed, the "verify" argument defaults to
False.
The "verify" argument is present in dnspython since the version 2.5.0.
(cherry picked from commit df8c419058)
The "without_fips" mark disables test function when BIND 9 was built
with the FIPS mode enabled as not everything works in FIPS-enabled
builds.
(cherry picked from commit feecbd8e77)
Track inside the dns_dnsseckey structure whether we have seen the
private key, or if this key only has a public key file.
If the key only has a public key file, or a DNSKEY reference in the
zone, mark the key 'pubkey'. In dnssec-signzone, if the key only
has a public key available, consider the key to be offline. Any
signatures that should be refreshed for which the key is not available,
retain the signature.
So in the code, 'expired' becomes 'refresh', and the new 'expired'
is only used to determine whether we need to keep the signature if
the corresponding key is not available (retaining the signature if
it is not expired).
In the 'keysthatsigned' function, we can remove:
- key->force_publish = false;
- key->force_sign = false;
because they are redundant ('dns_dnsseckey_create' already sets these
values to false).
(cherry picked from commit 5e3aef364f)
Add a test case for the scenario below.
There is a case when signing a zone with dnssec-signzone where the
private key file is moved outside the key directory (for offline
ksk purposes), and then the zone is resigned. The signature of the
DNSKEY needs refreshing, but is not expired.
Rather than removing the signature without having a valid replacement,
leave the signature in the zone (despite it needs to be refreshed).
(cherry picked from commit 0a91321d78)
There was confusion about whether the interval was calculated from
the validity period provided on the command line (with -s and -e),
or from the signature being replaced.
Add text to clarify that the interval is calculated from the new
validity period.
(cherry picked from commit ae42fa69fa)
If the generated status output exceeds 4096 it was silently truncated,
now we output that the status was truncated.
(cherry picked from commit 7ae7851173)
Commit 4555a31934 renamed the top-level
"primaries" block in bin/named/config.c to "remote-servers". This
configuration block lists the primary servers used for an IANA root zone
mirror when no primary servers are explicitly specified for it in the
configuration. However, the relevant part of the named_zone_configure()
function only looks for a top-level "primaries" block and not for any of
its synonyms. As a result, configuring an IANA root zone mirror with
just:
zone "." {
type mirror;
};
now results in a cryptic fatal error on startup:
loading configuration: not found
exiting (due to fatal error)
Fix by using the correct top-level block name in named_zone_configure().
(cherry picked from commit 010d2eb436)
This commit ensures that dig enables TLS SNI support for outgoing
connections in order to improve compatibility with other DNS server
software.
(cherry picked from commit e04fb30ee6)
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
(cherry picked from commit 6691a1530d)
Add back the top blocks 'parental-agents', 'primaries', and 'masters'
to the configuration. Do not document them as so many names for the
same clause is confusing.
This has a slight negative side effect that a top block 'primaries'
can be referred to with a zone statement 'parental-agents' for example,
but that shouldn't be a big issue.
(cherry picked from commit 1b2eadb197)
Having zone statements that are also top blocks is confusing, and if
we want to add more in the future (which I suspect will be for
generalized notifications, multi-signer), we need to duplicate a lot
of code.
Remove top blocks 'parental-agents' and 'primaries' and just have one
top block 'remote-servers' that you can refer to with zone statements.
(cherry picked from commit b121f02eac)
The terminating conditions for the startup notify test would
occasionally get ~20 records or get +10 seconds of records due to
a bad terminating condition. Additionally 20 samples lead to test
failures. Fix the terminating condition to use the correct conditional
(-eq -> -ge) and increase the minimum number of log entries to
average over to 40.
(cherry picked from commit 46388d07a2)
After the rndc reload command finished, we might have queried the
database zone sooner than it was reloaded because rndc reloads zones
asynchronously if no specific zone was provided. We should wait for "all
zones loaded" in the ns1 log to be sure.
(cherry picked from commit 0bdd03db66)
Add a none parameter to named configuration option `query-source` (respectively `query-source-v6`) which forbid usage of IPv4 (respectively IPv6) addresses when named is doing an upstream query.
Closes#4981 Turning-off upstream IPv6 queries while still listening to downstream queries on IPv6.
Merge branch 'colin/querysource-none' into 'main'
See merge request isc-projects/bind9!9727
Backport of MR !9727
Some changes had to be done to the existing 9.20.x code in order to
make this backport compatible:
- first, the 9.20.x branches support the `port` parameter in
query-source[-v6], where 9.21.x does not. The original changes
depend on things that can't be backported because that would break
`port` support.
- second, the changes remove the optional `address` parameter from the
canonical form. So `query-source address <ip>` is now printed as
`query-source <ip>`. This means that `named-checkconf -p` will now
generate different output if users have `query-source address <ip>` or
`query-source address <ip> port <port>`; it will now generate
`query-source <ip>` or `query-source <ip> port <port>`. This is a
non-breaking change, because the parser has been updated to support
this form as well.
When the tests were added, the files were generated without FIPS
compatibility in mind. That made the tests fail on recent OpenSSL
versions in FIPS mode.
So, the files were regenerated on a FIPS compliant system using the
following stanza:
$ openssl dhparam -out <file> 3072
Apparently, the old files are not valid for FIPS starting with OpneSSL
3.1.X release series as "FIPS 140-3 compliance changes" are mentioned
in the changelog:
https://openssl-library.org/news/openssl-3.1-notes/
(cherry picked from commit 384c92880e)
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
(cherry picked from commit f3af8a7dc3)
If ECDSAP256SHA256_SUPPORTED or ECDSAP384SHA384_SUPPORTED variables were
not present in the environment, os.environ would raise KeyError that is
not being handled in the decorator. Use os.getenv() instead.
(cherry picked from commit 1a5683b638)
Changing the default for max-recursion-queries from 100 to 32 was too
strict in some cases, especially lookups in reverse IPv6 trees started
to fail more frequently. From issue #4921 it looks like 50 is a better
default.
Now that we have 'max-query-count' as a global limit of outgoing queries
per client request, we can increase the default for
'max-recursion-queries' again, as the number of recursive queries is
no longer bound by the multiple of 'max-recursion-queries' and
'max-query-restarts'.
(cherry picked from commit 84df920d9e)
This adds a new test directory specifically for CAMP attacks. This first
test in this test directory follows multiple CNAME chains, restarting
the max-recursion-queries counter, but should bail when the global
maximum quota max-query-count is reached.
(cherry picked from commit 73eafaba14)
Add another option to configure how many outgoing queries per
client request is allowed. The existing 'max-recursion-queries' is
per restart, this one is a global limit.
(cherry picked from commit bbc16cc8e6)
In dns_zone_getdnssecsignstats, dns_zone_getrcvquerystats and
dns_zone_getrequeststats attach to the statistics structure.
(cherry picked from commit fb50a71159)
Commit 4b3d0c6600 has removed them, but
did not remove few traces in documentation and help. Remove them from
remaining places.
(cherry picked from commit 65b9eeb39a)
The ns2/managed1.conf file is created by the setup.sh script. Then, in
the tests.sh script it is moved to ns2/managed.conf. The latter file
name is in mkeys extra_artifacts, but the former one is not. This is a
problem when pytest is started with the --setup-only option as it only
runs the setup.sh script (e.g., in the cross-version-config-tests CI
job) and thus failing the "Unexpected files found" assertion.
(cherry picked from commit e7d973bd00)
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
(cherry picked from commit d13e94b930)
Commit amended in order to fix usage of isc_log_write (adding dns_lctx
parameter)
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
(cherry picked from commit b61739836d)
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
(cherry picked from commit 2cb5a6210f)
The nslookup system test checks the count of resolved addresses in
the CNAME tests using a 'grep' match on the hostname, and ignoring
lines containing the 'canonical name' string. In order to protect
the check from intermittent failures like the 'address in use' warning
message, which then automatically resolves after a retry, edit the
'grep' matching string to also ignore the comments (as the mentioned
warning message is a comment which contains the hostname).
(cherry picked from commit 345b0f9e5c)
Add test cases which check that when a XoT primary server is
unreachable or is already marked as unreachble then the next
primary server in the list is used.
(cherry picked from commit 12225d125b)
Colin Vidal
Michal Nowak
Nicki KřížekandMichal Nowak
Matthijs Mekking
Mark Andrews
Michał Kępień
Artem Boldariev
Ondřej Surý
Evan Hunt
Petr MenšíkandMark Andrews
Aram Sargsyan