Some tests don't have a mock root server configured, because they don't
need one. However, these tests might still leak queries to actual name
servers. Add a shared root hints file which can serve as a blackhole for
these queries.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
When using automated DNSSEC management, it is required that the zone
is dynamic, or that inline-signing is enabled (or both). Update the
checkconf code to also allow inline-signing to be enabled within
dnssec-policy.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
We no longer accept copying DNSSEC records from the raw zone to
the secure zone, so update the kasp system test that relies on this
accordingly.
Also add more debugging and store the dnssec-verify results in a file.
Add a kasp system test that reconfigures a dnssec-policy zone from
maintaining DNSSEC records directly to the zone to using inline-signing.
Add a similar test case to the nsec3 system test, testing the same
thing but now with NSEC3 in use.
Moves tests from being RSASHA1 based to RSASHA256 based where possible
and split out the remaining RSASHA1 based tests so that they are not
run on OS's that don't support RSASHA1.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
The function 'private_type_record()' is now used in multiple system
setup scripts and should be moved to the common configuration script
conf.sh.common.
Add a test case when a dnssec-policy is reconfigured to "none",
without setting it to "insecure" first. This is unsupported behavior,
but we want to make sure the behavior is somewhat expected. The
zone should remain signed (but will go bogus once the signatures
expire).
The tests for going insecure should be changed to use the built-in
"insecure" policy.
The function that checks dnssec status output should again check
for the special case "none".
The kasp system test was getting pretty large, and more tests are on
the way. Time to split up. Move tests that are related to migrating
to dnssec-policy to a separate directory 'keymgr2kasp'.
Add two test zones that will be reconfigured to go insecure, by
setting the 'dnssec-policy' option to 'none'.
One zone was using inline-signing (implicitly through dnssec-policy),
the other is a dynamic zone.
Two tweaks to the kasp system test are required: we need to set
when to except the CDS/CDS Delete Records, and we need to know
when we are dealing with a dynamic zone (because the logs to look for
are slightly different, inline-signing prints "(signed)" after the
zone name, dynamic zones do not).
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
The wait until zones are signed after rndc reconfig is broken
because the zones are already signed before the reconfig. Fix
by having a different way to ensure the signing of the zone is
complete. This does require a call to the "wait_for_done_signing"
function after each "check_keys" call after the ns6 reconfig.
The "wait_for_done_signing" looks for a (newly added) debug log
message that named will output if it is done signing with a certain
key.
In the kasp system test, we are going to set the keytimes on
dnssec-keygen so we can test them against the key creation time.
This prevents off by one second in the test, something that can
happen if you set those times with dnssec-settime after
dnssec-keygen.
Also fix some test output filenames.
Increate the DNSKEY TTL of the migrate.kasp zone for the following
reason: The key states are initialized depending on the timing
metadata. If a key is present long enough in the zone it will be
initialized to OMNIPRESENT. Long enough here is the time when it
was published (when the setup script was run) plus DNSKEY TTL.
Otherwise it is set to RUMOURED, or to HIDDEN if no timing metadata
is set or the time is still in the future.
Since the TTL is "only" 5 minutes, the DNSKEY state may be
initialized to OMNIPRESENT if the test is slow, but we expect it
to be in RUMOURED state. If we increase the TTL to a couple of
hours it is very unlikely that it will be initialized to something
else than RUMOURED.
This fixes another intermittent failure in the kasp system test.
It does not happen often, except for in the Windows platform tests
where it takes a long time to run the tests.
In the "kasp" system test, there is an "rndc reconfig" call which
triggers a new rekey event. check_next_key_event() verifies the time
remaining from the moment "rndc reconfig" is called until the next key
event. However, the next key event time is calculated from the key
times provided during key creation (i.e. during test setup). Given
this, if "rndc reconfig" is called a significant amount of time after
the test is started, some check_next_key_event() checks will fail.
Fix by calculating the time passed since the start of the test and
when 'rndc reconfig' happens. Substract this time from the
calculated next key event.
This only needs to be done after an "rndc reconfig" on zones where
the keymgr needs to wait for a period of time (for example for keys
to become OMNIPRESENT, or HIDDEN). This is on step 2 and step 5 of
the algorithm rollover. In step 2 there is a waiting period before
the DNSKEY is OMNIPRESENT, in step 5 there is a waiting period
before the DNSKEY is HIDDEN.
In step 1 new keys are created, in step 3 and 4 key states just
entered OMNIPRESENT, and in step 6 we no longer care because the
key lifetime is unlimited and we default to checking once per hour.
Regardless of our indifference about the next key event after step 6,
change some of the key timings in the setup script to better
reflect reality: DNSKEY is in HIDDEN after step 5, DS times have
changed when the new DS became active.
Add a test to ensure migration from 'auto-dnssec maintain;' to
dnssec-policy works even if the algorithm is changed. The existing
keys should not be removed immediately, but their goal should be
changed to become hidden, and the new keys with the different
algorithm should be introduced immediately.
If we initialize goals on all keys, superfluous keys that match
the policy all desire to be active. For example, there are six
keys available for a policy that needs just two, we only want to
set the goal state to OMNIPRESENT on two keys, not six.
Migrating from 'auto-dnssec maintain;' to dnssec-policy did not
work properly, mainly because the legacy keys were initialized
badly. Earlier commit deals with migration where existing keys
match the policy. This commit deals with migration where existing
keys do not match the policy. In that case, named must not
immediately delete the existing keys, but gracefully roll to the
dnssec-policy.
However, named did remove the existing keys immediately. This is
because the legacy key states were initialized badly. Because
those keys had their states initialized to HIDDEN or RUMOURED, the
keymgr decides that they can be removed (because only when the key
has its states in OMNIPRESENT it can be used safely).
The original thought to initialize key states to HIDDEN (and
RUMOURED to deal with existing keys) was to ensure that those keys
will go through the required propagation time before the keymgr
decides they can be used safely. However, those keys are already
in the zone for a long time and making the key states represent
otherwise is dangerous: keys may be pulled out of the zone while
in fact they are required to establish the chain of trust.
Fix initializing key states for existing keys by looking more closely
at the time metadata. Add TTL and propagation delays to the time
metadata and see if the DNSSEC records have been propagated.
Initialize the state to OMNIPRESENT if so, otherwise initialize to
RUMOURED. If the time metadata is in the future, or does not exist,
keep initializing the state to HIDDEN.
The added test makes sure that new keys matching the policy are
introduced, but existing keys are kept in the zone until the new
keys have been propagated.
Migrating from 'auto-dnssec maintain;' to dnssec-policy did not
work properly, mainly because the legacy keys were initialized
badly. Several adjustments in the keymgr are required to get it right:
- Set published time on keys when we calculate prepublication time.
This is not strictly necessary, but it is weird to have an active
key without the published time set.
- Initalize key states also before matching keys. Determine the
target state by looking at existing time metadata: If the time
data is set and is in the past, it is a hint that the key and
its corresponding records have been published in the zone already,
and the state is initialized to RUMOURED. Otherwise, initialize it
as HIDDEN. This fixes migration to dnssec-policy from existing
keys.
- Initialize key goal on keys that match key policy to OMNIPRESENT.
These may be existing legacy keys that are being migrated.
- A key that has its goal to OMNIPRESENT *or* an active key can
match a kasp key. The code was changed with CHANGE 5354 that
was a bugfix to prevent creating new KSK keys for zones in the
initial stage of signing. However, this caused problems for
restarts when rollovers are in progress, because an outroducing
key can still be an active key.
The test for this introduces a new KEY property 'legacy'. This is
used to skip tests related to .state files.
We may be checking the algorithm steps too fast: the reconfig
command may still be in progress. Make sure the zones are signed
and loaded by digging the NSEC records for these zones.
Add a test case for algorithm rollover. This is triggered by
changing the dnssec-policy. A new nameserver ns6 is introduced
for tests related to dnssec-policy changes.
This requires a slight change in check_next_key_event to only
check the last occurrence. Also, change the debug log message in
lib/dns/zone.c to deal with checks when no next scheduled key event
exists (and default to loadkeys interval 3600).
Matthijs Mekking
Tom Krizek
Evan Hunt
Mark AndrewsandMichal Nowak
Ondřej Surý