When -T cookiealwaysvalid is passed to named, DNS cookie checks for
the incoming queries always pass, given they are structurally correct.
(cherry picked from commit 807ef8545d)
When answering queries, don't add data to the additional section if
the answer has more than 13 names in the RDATA. This limits the
number of lookups into the database(s) during a single client query,
reducing query processing load.
Also, don't append any additional data to type=ANY queries. The
answer to ANY is already big enough.
(cherry picked from commit a1982cf1bb)
Instead of running the whole resolver/ns4 server with -T noaa flag,
use it only for the part where it is actually needed. The -T noaa
could interfere with other parts of the test because the answers don't
have the authoritative-answer bit set, and we could have false
positives (or false negatives) in the test because the authoritative
server doesn't follow the DNS protocol for all the tests in the resolver
system test.
(cherry picked from commit e51d4d3b88)
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
(cherry picked from commit 104f3b82fb)
(cherry picked from commit 2e04f0380c)
the number of iterative queries that can be sent to resolve a
name now defaults to 32 rather than 100.
(cherry picked from commit 7e3b425dc2)
(cherry picked from commit a11367ade3)
MAX_RESTARTS is no longer hard-coded; ns_server_setmaxrestarts()
and dns_client_setmaxrestarts() can now be used to modify the
max-restarts value at runtime. in both cases, the default is 11.
(cherry picked from commit c5588babaf)
(cherry picked from commit bfbc6a6c84)
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
(cherry picked from commit 05d78671bb)
(cherry picked from commit dd88a4cdfc)
Test that SIG(0) signer is NOT sent to the external socket for
authorization. It MUST NOT be considered a valid signature by
any chance.
Also check that the signer's name does not appear in authsock.pl
output.
(cherry picked from commit cf8838085905171fbc00747eb210e8b8284ca0e1)
With enabled buffering the output gets lost when the process
receives a TERM signal. Disable the buffering.
(cherry picked from commit a0311dfb6e2a51f89dfa8b200b96a0f4675fb654)
IO::Socket::INET6 is no longer being maintained and its functionality
has been replaced by IO::Socket::IP.
(cherry picked from commit d1983adc22)
(cherry picked from commit fff8de8430)
We were missing a test where a single owner name would have multiple
types with a different case. The generated RRSIGs and NSEC records will
then have different case than the signed records and message parser have
to cope with that and treat everything as the same owner.
(cherry picked from commit c8b623d87f)
Recent python does not make parsetab.py successfully, because some token
regexp is starting with ?i flag. Remove that flag from regex and pass it
as extra flags parameter instead.
In Net::DNS 1.42 $ns->main_loop no longer loops. Use current methods
for starting the server, wait for SIGTERM then cleanup child processes
using $ns->stop_server(), then remove the pid file.
(cherry picked from commit c2c59dea60)
Add a test ensuring that the amount of work fctx_getaddresses() performs
for any encountered delegation is limited: delegate example.net to a set
of 1,000 name servers in the redirect.com zone, the names of which all
resolve to IP addresses that nothing listens on, and query for a name in
the example.net domain, checking the number of times the findname()
function gets executed in the process; fail if that count is excessively
large.
Since the size of the referral response sent by ans3 is about 20 kB, it
cannot be sent back over UDP (EMSGSIZE) on some operating systems in
their default configuration (e.g. FreeBSD - see the
net.inet.udp.maxdgram sysctl). To enable reliable reproduction of
CVE-2022-2795 (retry patterns vary across BIND 9 versions) and avoid
false positives at the same time (thread scheduling - and therefore the
number of fetch context restarts - vary across operating systems and
across test runs), extend bin/tests/system/resolver/ans3/ans.pl so that
it also listens on TCP and make "ns1" in the "resolver" system test
always use TCP when communicating with "ans3".
Also add a test (foo.bar.sub.tld1/TXT) that ensures the new limitations
imposed on the resolution process by the mitigation for CVE-2022-2795 do
not prevent valid, glueless delegation chains from working properly.
- Check that an NS in an authority section returned from a forwarder
which is above the name in a configured "forward first" or "forward
only" zone (i.e., net/NS in a response from a forwarder configured for
local.net) is not cached.
- Test that a DNAME for a parent domain will not be cached when sent
in a response from a forwarder configured to answer for a child.
- Check that glue is rejected if its name falls below that of zone
configured locally.
- Check that an extra out-of-bailiwick data in the answer section is
not cached (this was already working correctly, but was not explicitly
tested before).
- v9_11 backport: Revert primary/secondary to master/slave,
backport rndc helper, backport ns8 config.
(cherry picked from commit bf3fffff67)
The lame-ttl cache is implemented in ADB as per-server locked
linked-list "indexed" with <qname,qtype>. This list has to be walked
every time there's a new query or new record added into the lame cache.
Determined attacker can use this to degrade performance of the resolver.
Resolver testing has shown that disabling the lame cache has little
impact on the resolver performance and it's a minimal viable defense
against this kind of attack.
Make sure an incoming IXFR containing an SOA record which is not placed
at the apex of the transferred zone does not result in a broken version
of the zone being served by named and/or a subsequent crash.
(cherry picked from commit 5547003a3d)
FreeBSD 13.0 replaced GNU grep with BSD grep and removed support for
"redundant escapes for most ordinary characters" from regex(3) library,
therefore the matching sequence in digdelv/tests.sh needs to be
rewritten otherwise it fails with:
grep: trailing backslash (\)
(cherry picked from commit 253ae96bf1)
When the `named` would hang on startup it would be killed with SIGKILL
leaving us with no information about the state the process was in.
This commit changes the start.pl script to send SIGABRT instead, so we
can properly collect and process the coredump from the hung named
process.
(cherry picked from commit 861a236937)
The nsupdate system test did not record failures from the
'update_test.pl' Perl script. This was because the 'ret' value was
not being saved outside the '{ $PERL ... || ret=1 } cat_i' scope.
Change this piece to store the output in a separate file and then
cat its contents. Now the 'ret' value is being saved.
Also record failures in 'update_test.pl' if sending the update
failed.
Add missing 'n' incrementals to 'nsupdate/test.sh' to keep track of
test numbers.
(cherry picked from commit 5b31811b5f)
* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
(cherry picked from commit 8510ccaa54)
When answering a query, named should never attempt to add the same RRset
to the ANSWER section more than once. However, such a situation may
arise when chasing DNAME records: one of the DNAME records placed in the
ANSWER section may turn out to be the final answer to a client query,
but there is no way to know that in advance. Tweak the relevant INSIST
assertion in query_find() so that it handles this case properly. The
rdataset is freed later anyway, so there is no need to clean it up
immediately.
If "tkey-gssapi-credential" is set in the configuration and GSSAPI
support is not available, named will refuse to start. As the test
system framework does not support starting named instances
conditionally, ensure that "tkey-gssapi-credential" is only present in
named.conf if GSSAPI support is available.
(cherry picked from commit 6feac68b50)
Four named instances in the "nsupdate" system test have GSS-TSIG support
enabled. All of them currently use "tkey-gssapi-keytab". Configure two
of them with "tkey-gssapi-credential" to test that option.
As "tkey-gssapi-keytab" and "tkey-gssapi-credential" both provide the
same functionality, no test modifications are required. The difference
between the two options is that the value of "tkey-gssapi-keytab" is an
explicit path to the keytab file to acquire credentials from, while the
value of "tkey-gssapi-credential" is the name of the principal whose
credentials should be used; those credentials are looked up in the
keytab file expected by the Kerberos library, i.e. /etc/krb5.keytab by
default. The path to the default keytab file can be overridden using by
setting the KRB5_KTNAME environment variable. Utilize that variable to
use existing keytab files with the "tkey-gssapi-credential" option.
The KRB5_KTNAME environment variable should not interfere with the
"tkey-gssapi-keytab" option. Nevertheless, rename one of the keytab
files used with "tkey-gssapi-keytab" to something else than the contents
of the KRB5_KTNAME environment variable in order to make sure that both
"tkey-gssapi-keytab" and "tkey-gssapi-credential" are actually tested.
(cherry picked from commit 1746d2e84a)
When the authsock.pl script would be terminated with a signal,
it would leave the pidfile around. This commit adds a signal
handler that cleanups the pidfile on signals that are expected.
Aram Sargsyan
Ondřej SurýandNicki Křížek
Evan HuntandOndřej Surý
Petr ŠpačekandNicki Křížek
Mark AndrewsandMichal Nowak
Petr MenšíkandMichal Nowak
Tinderbox User
Ondřej SurýandMichał Kępień
Matthijs Mekking