When compacting journal, we don't need to flush/fsync the new journal
continuously, but only at the very end before we close and rename the
journal.
Closes: #3556
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
Instead of cleaning the dns_badcache opportunistically, add per-loop
LRU, so each thread-loop can clean the expired entries. This also
allows removal of the atomic operations as the badcache entries are now
immutable, instead of updating the badcache entry in place, the old
entry is now deleted from the hashtable and the LRU list, and the new
entry is inserted in the LRU.
There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
Previously a ISC_R_CANCELED result code switch-case has been added to
the zone.c:zone_xfrdone() function, which did two things:
1. Schedule a new zone transfer if there's a scheduled force reload of
the zone.
2. Reset the primaries list.
This proved to be not a well-thought change and causes problems,
because the ISC_R_CANCELED code is used not only when the whole transfer
is canceled, but also when, for example, a particular primary server is
unreachable, and named still needs to continue the transfer process by
trying the next server, which it now no longer does in some cases. To
solve this issue, three changes are made:
1. Make sure dns_zone_refresh() runs on the zone's loop, so that the
sequential calls of dns_zone_stopxfr() and dns_zone_forcexfr()
functions (like done in 'rndc retransfer -force') run in intended
order and don't race with each other.
2. Since starting the new transfer is now guaranteed to run after the
previous transfer is shut down (see the previous change), remove the
special handling of the ISC_R_CANCELED case, and let the default
handler to handle it like before. This will bring back the ability to
try the next primary if the current one was interrupted with a
ISC_R_CANCELED result code.
3. Change the xfrin.c:xfrin_shutdown() function to pass the
ISC_R_SHUTTINGDOWN result code instead of ISC_R_CANCELED, as it makes
more sense.
The DLZ modules are poorly maintained as we only ensure they can still
be compiled, the DLZ interface is blocking, so anything that blocks the
query to the database blocks the whole server and they should not be
used except in testing. The DLZ interface itself should be scheduled
for removal.
DNS_LOGMODULE_RBTDB was simply inappropriate, and this
log message is actually dependent on db implementation
details, so DNS_LOGMODULE_DB would be the best choice.
The new log message is emitted when adding or updating an RRset
fails due to exceeding the max-records-per-type limit. The log includes
the owner name and type, corresponding zone name, and the limit value.
It will be emitted on loading a zone file, inbound zone transfer
(both AXFR and IXFR), handling a DDNS update, or updating a cache DB.
It's especially helpful in the case of zone transfer, since the
secondary side doesn't have direct access to the offending zone data.
It could also be used for max-types-per-name, but this change
doesn't implement it yet as it's much less likely to happen
in practice.
The 'dns' variable in dohpath can be in various forms ({?dns},
{dns}, {&dns} etc.). To check for a valid dohpath it ends up
being simpler to just parse the URI template rather than looking
for all the various forms if substring.
Reintroduce logic to apply diffs when the number of pending tuples is
above 128. The previous strategy of accumulating all the tuples and
pushing them at the end leads to excessive memory consumption during
transfer.
This effectively reverts half of e3892805d6
When canceling the ADB find, the lock on the find gets released for
a brief period of time to be locked again inside adbname lock. During
the brief period that the ADB find is unlocked, it can get canceled by
other means removing it from the adbname list which in turn causes
assertion failure due to a double removal from the adbname list.
Recheck if the find->adbname is still valid after acquiring the lock
again and if not just skip the double removal. Additionally, attach to
the adbname as in the worst case, the adbname might also cease to exist
if the scheduler would block this particular thread for a longer period
of time invalidating the lock we are going to acquire and release.
QPDB is now a default implementation for both cache and zone. Remove
the venerable RBTDB database implementation, so we can fast-track the
changes to the database without having to implement the design changes
to both QPDB and RBTDB and this allows us to be more aggressive when
refactoring the database design.
There is a data race between the statistics channel, which uses
`dns_zone_getxfr()` to get a reference to `zone->xfr`, and the creation
of `zone->xfr`, because the latter happens outside of a zone lock.
Split the `dns_xfrin_create()` function into two parts to separate the
zone tranfer startring part from the zone transfer object creation part.
This allows us to attach the new object to a local variable first, then
attach it to `zone->xfr` under a lock, and only then start the transfer.
Originally, the dns_dbversion_t was typedef'ed to void type. This
allowed some flexibility, but using (void *) just removes any
type-checking that C might have. Instead of using:
typedef void dns_dbversion_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbversion dns_dbversion_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbversion_t type.
Originally, the dns_dbnode_t was typedef'ed to void type. This allowed
some flexibility, but using (void *) just removes any type-checking that
C might have. Instead of using:
typedef void dns_dbnode_t;
use a trick to define the type to non-existing structure:
typedef struct dns_dbnode dns_dbnode_t;
This allows the C compilers to employ the type-checking while the
structure itself doesn't have to be ever defined because the actual
'storage' is never accessed using dns_dbnode_t type.
Add an option to dnssec-ksr keygen, -o, to create KSKs instead of ZSKs.
This way, we can create a set of KSKS for a given period too.
For KSKs we also need to set timing metadata, including "SyncPublish"
and "SyncDelete". This functionality already exists in keymgr.c so
let's make the function accessible.
Replace dnssec-keygen calls with dnssec-ksr keygen for KSK in the
ksr system test and check keys for created KSKs as well. This requires
a slight modification of the check_keys function to take into account
KSK timings and metadata.
some EDNS option names, including DAU, DHU, N3U, and CHAIN,
were not printed in dns_message_pseudosectiontotext() or
_psuedosectiontoyaml(); they were displayed as unknown options.
this has been corrected.
that code was also refactored to use switch instead of if/else,
and to look up the option code names in a table to prevent
inconsistencies between the two formats. one such inconsistency
was corrected: the "TCP-KEEPALIVE" option is now always printed
with a hyphen, instead of being "TCP KEEPALIVE" when not using
YAML. the keepalive system test has been updated to expect this.
EDNS options that print DNS names (i.e., CHAIN and Report-Channel)
now enclose them in quotation marks to ensure YAML correctness.
the auth system test has been updated to expect this when grepping
for Report-Channel options.
Dispatch needs to know the transport that is being used over the
TCP connection to correctly allow for it to be reused. Add a
transport parameter to dns_dispatch_createtcp and dns_dispatch_gettcp
and use it when selecting a TCP socket for reuse.
RFC 9567 section 8.1 specifies that the agent domain cannot
be a subdomain of the domain it is reporting on. therefore,
in addition to making it illegal to configure that at the
zone level, we also need to disable send-report-channel for
any zone for which the global send-report-channel value is
a subdomain.
we also now warn if send-report-channel is configured
globally to a zone that we host, but that zone doesn't
have log-report-channel set.
add a boolean "log-report-channel" option for primary and
secondary zones, which sets the DNS_ZONEOPT_LOGREPORTS zone
flag. this option is not yet functional.
If send-report-channel is set at the zone level, it will
be stored in the zone object and used instead of the
view-level agent-domain when constructing the EDNS
Report-Channel option.
This commit adds support for the EDNS Report-Channel option,
which is returned in authoritative responses when EDNS is in use.
"send-report-channel" sets the Agent-Domain value that will be
included in EDNS Report-Channel options. This is configurable at
the options/view level; the value is a DNS name. Setting the
Agent-Domain to the root zone (".") disables the option.
When this value has been set, incoming queries matchng the form
_er.<qtype>.<qname>.<extended-error-code>._er.<agent-domain>/TXT
will be logged to the dns-reporting-agent channel at INFO level.
(Note: error reporting queries will only be accepted if sent via
TCP or with a good server cookie. If neither is present, named
returns BADCOOKIE to complete the DNS COOKIE handshake, or TC=1
to switch the client to TCP.)
These are logged to the update category at debug level 99 and
have the following form.
update-policy: using: signer=ddns-key.example.nil, name=updated.example.nil, addr=10.53.0.1, tcp=0, type=A, target=
update-policy: trying: grant zonesub-key.example.nil zonesub TXT
update-policy: next rule: signer does not match identity
update-policy: trying: grant ddns-key.example.nil zonesub ANY
update-policy: matched: grant ddns-key.example.nil zonesub ANY
or
update-policy: using: signer=restricted.example.nil, name=example.nil, addr=10.53.0.1, tcp=0, type=TXT, target=
update-policy: trying: grant zonesub-key.example.nil zonesub TXT
update-policy: next rule: signer does not match identity
update-policy: trying: grant ddns-key.example.nil zonesub ANY
update-policy: next rule: signer does not match identity
update-policy: trying: grant restricted.example.nil zonesub ANY
update-policy: next rule: name/subdomain mismatch
update-policy: no match found
where 'using:' is the calling parameters of dns_ssutable_checkrules,
'trying:' in the rule bing evaluated, "next rule:" is the reason
the rule does not match, "matched:" repeats the matched rule, and
no match found is reported when te set of rules is exhausted.
Unify libcrypto initialization and explicit digest fetching in a single
place and move relevant code to the isc__crypto namespace instead of
isc__tls.
It will remove the remaining implicit fetching and deduplicate explicit
fetching inside the codebase.
Prior to running the keymgr, first make sure that existing keys
are present in the new keylist. If not, treat this as an operational
error where the keys are made offline (temporarily), possibly unwanted.
The dns_zone_getxfrintime() function fails to lock the zone before
accessing its 'xfrintime' structure member, which can cause a data
race between soa_query() and the statistics channel. Add the missing
locking/unlocking pair, like it's done in numerous other similar
functions.
When matching the TCP dispatch responses, we should skip the responses
that do not belong to our TCP connection. This can happen with faulty
upstream server that sends invalid QID back to us.
The dns_dispatch_add() function registers the 'resp' entry in
'disp->mgr->qids' hash table with 'resp->port' being 0, but in
tcp_recv_success(), when looking up an entry in the hash table
after a successfully received data the port is used, so if the
local port was set (i.e. it was not 0) it fails to find the
entry and results in an unexpected error.
Set the 'resp->port' to the given local port value extracted from
'disp->local'.
Static-stub address and addresses from other sources where being
mixed together resulting in static-stub queries going to addresses
not specified in the configuration or alternatively static-stub
addresses being used instead of the real addresses.
An exit path in the dns_dispatch_add() function fails to get out of
the RCU critical section when returning early. Add the missing
rcu_read_unlock() call.
The dns_dispatch_add() call in the dns_xfrin unit had hardcoded 30
second limit. This meant that any incoming transfer would be stopped in
it didn't finish within 30 seconds limit. Additionally, dns_xfrin
callback was ignoring the return value from dns_dispatch_getnext() when
restarting the reading from the TCP stream; this could cause transfers
to get stuck waiting for a callback that would never come due to the
dns_dispatch having already been shut down.
Call the dns_dispatch_add() without a timeout and properly handle the
result code from the dns_dispatch_getnext().
The dns_dispatch_add() has timeout parameter that could not be 0 (for
not timeout). Modify the dns_dispatch implementation to accept a zero
timeout for cases where the timeouts are undesirable because they are
managed externally.
when the QP cache was adapted from the RBT database, some names
weren't changed. this could be confusing, so let's change them now.
also, we no longer need to include rbt.h.